Ruggedly Dependable

 

Yes, that statement could be applied to me in some respects, but I’m talking winter components. After some deliberation, I decided to switch Muffin’s Continental Pure Contact for the Contact Plus. No particular reason, save for the fact I was going to be cleaning the chain and applying the Muc Off C3 All Weather, so thought I’d switch rubber since opportunity presented.  Planet X advised that there was clearance for 43mm, so I’ve reached for the bigger, 40mm Continental Contact Plus TESTED: CONTINENTAL CONTACT PLUS TYRES  .

These are a wire bead model, adding some significant grams over the folding Pure Contact but they roll surprisingly well for a big tyre and are seriously dependable when it comes to cuts and ultimately, punctures. Flats happen and will claim even the most dependable pneumatic rubber at some points, but I’d sooner not be tending one on a cold, dark, wet night.

Interestingly, the Contact Plus are much easier to mount and remove and seem to offer a bit more room at the rear triangle- when both are inflated to 70psi. Anyhow, that’s all academic, the Contact Plus are staying, at least for winter.  

The Muc Off C3 All Weather seems a little slicker than its base counterpart Muc-Off All Weather Chain Lube | cycling-not-racing and indeed, Weldtite All Weather Lube Weldtite All Weather Lube | cycling-not-racing , although that’s less surprising, given the price differential. Mot much between them on the cleanliness front, if a diet of muddy, greasy lanes is any gauge.

The Weldite is drizzle on, wipe and go, whereas the Muc-Off require four hours to cure. I’ve tended to leave it overnight but as you’d hope, have also tested the four-hour claims.  Seems so in temperatures between 11 and 14 degrees, although tanking temperatures may sing a different tune.  

 Storm Claudia gave ample opportunity to assess its staying prowess, not to mention that of the Sidi Algor. Thus far, both are holding out against the waterlogged lanes and driving rains, which is very welcome. However, I’ll need some sustained cold to assess the latter properly-afterall, Algor literally translates as “cold”.  An unintentional ejection of the Gaciron Cetus Gaciron Cetus 1700 Underneath Bike Light | cycling-not-racing front light, into a deep puddle suggests weather sealing is very good. True, it’s not full-on submersion but still impressive and there’s been no lasting effect, or damage.

Wetter periods are also leading me to conclude the Ergon bar tape is understated on the grip front and reassuringly easy to get along with-no slipping, no white-knuckle rides and, unlike some, surprisingly straightforward to keep clean.

A quick shot of bikewash, lathered up with a medium stiff brush will shift mucky, ingrained spatter with nominal effort. Plenty of mixed terrain riding suggests the 3mm Orthrocell padding is very effective over longer distances but without looking unduly bulky. Less important on a gravel bike perhaps, but great if you were looking to dress a more traditional road specific winter/trainer, or tourer.  Until recently, temperatures have been mild enough for mitts. This is significant because it enabled me to assess the texture and purchase against bare skin. The woven surface texture is slightly reminiscent of cotton tapes, although without the sogginess when it’s raining dogs.  

     

Having tweaked Denise’s rear mech tension slightly, curing a modest but annoying shifting glitch midway along the cassette, I returned from a particularly wet ride, to discover a tiny but annoying amount of play in Denise's one- inch Stronglight A9 headset. 

 

An easy fix, although less convenient when you can't locate those large wrenches. I found my BBB Headfix but then recalled I only had a single 32mm and needed two. Couldn't locate my cherished Campagnolo but thankfully was able to remove slop and get everything bang on with a single wrench-seems as if the cable hanger worked as a useful buffer, preventing the bearing race moving while I snugged the locknut down. 

 

One of those periodic, rather than regular tweaks but reminded me how convenient the Aheadset systems are by comparison.  Two Allen keys-4mm for the pinch bolts and a 5/6mm for adjusting the pre-load. An easy job mid ride, or indeed tour-assuming bearings and races are otherwise in good health.

Servicing using stout grease and protecting the lower race from water and ingress. Obviously, mudguards (fenders) make a huge difference, but this isn't always practical.  A boot made from scrap butyl inner tube is another additional defence, extending their life and to some extent, service intervals. Especially on gravel and mountain bikes seeing hard service. 

After a very ambient start, November has awoken and with wet roads and temperatures dipping below zero, I decided to dust down some 35mm Schwalbe Winter Spikes- I really didn’t want a repeat of last January, claiming a jersey, tights and Denise’s Tektro RL520 brake lever. Not to mention some pride... The Marathons can be stubborn to fit, and these are no exception, claiming a composite Park tyre lever and causing a pinch flat.

 Minimum pressure is cited as 35psi, max 85, so I’ve gone for 65-70, offering a bit more grip but without unduly compromising rolling resistance.  Minus 2 on our first outing and the bike handled as if it were on rails, the spikes biting into the ice beneath and providing that beautiful traction. However, caution and sense are still called for- the elements can catch us out and other road users may slide, or experience difficulties. Something I was reminded of when a large Honda overtook, slid and then mis-shifted.  No harm done to either party but a reminder none of us can afford to be complacent.  

  

 

Beast From The East

Swooshing along the snowy backroads, I bit into a somewhat al-dente chocolate bar, broke my tooth and promptly swallowed it, complete with crown! There isn’t much tooth remaining, which presented my dentist with a dilemma.

Mercifully, its salvageable. He’s proposing to use a series of metal pins to provide a framework for a replacement crown. I also need a filling but frankly, I’m just relieved any damage done is fully repairable.  

Aside from mourning my lost smile, the remainder of this week’s riding was pleasantly uneventful.

Tuesday’s conditions threatened to be more adverse, so I switched over to the 118 spike Schwalbe https://www.sevendaycyclist.com/schwalbe-winter-spiked-tyre . The carbide spikes are showing signs of wear, not enough that I’m worried about going rubber-up. Nonetheless, I’ll invest in a new kit, before we hit skid city.

Weather forecasts, here in the UK at least tend to overplay any incoming front. Anecdotally, I suspect this stems from Michael Fish’s failure to predict the storm of October 1987. However, the “Beast from the East” arrived with a vengeance, bringing considerable snowfall. The sort that Land Rover defenders take in their stride but sees SUVs spinning their wheels, and drifting.

The Schwalbe active winter may be their baseline, spiked model but there’s nothing low-rent about their performance. Bustling along the backroads at 18mph, while their chevron tread sweeps away the deep, virgin snow along completely deserted lanes. Spikes biting into the ice beneath, providing traction and inspiring confidence.

Tainted smile hidden behind my North Wave balaclava and hands toasty in BTwin 700 cold weather gloves https://www.sevendaycyclist.com/btwin-700-cold-weather-gloves  , I was certainly grinning, despite the mercury struggling to hit minus 2. Monday was colder, thanks to the ruthless wind-chill, which in real term translated as minus 6. Its been a good deal colder overnight.  

Over the past few rides, the SKS lube has turned a sticky black but seems relatively tenacious, clinging on very convincingly to the links, despite these very wintry conditions. Other observations include its readiness transfer to hands, something I’d expect from a wet blend… Anyhow, 130 miles, as set by the Smoove Universal chain lube https://www.sevendaycyclist.com/smoove-universal-chain-lube  is the number to beat.

Talking of dry types, the Weldtite TF2 ultra dry clocked up 105 before being completely stripped by the elements. https://www.sevendaycyclist.com/tf2  Once the SKS (and the present climate) starts receding, I’ll switch to Finish line 1-step cleaner and lubricant and for the fixed, Finish Line Ceramic Wet.

There’s an old belief that winter bikes need better prep, since they’ll get less maintenance. I see the argument for stiffer greases and lubes, since bikes get exposed to harsher conditions. I had toyed with stripping and re-greasing the Univega’s bottom (headset) race.

Chickened out-on account of the cold, its sporting full-length guards and I delivered a healthy dollop of ceramic stuff during its revamp last January. https://www.sevendaycyclist.com/after-the-gritters-went-home  Pencilled this surgery in for next week, when things thaw out a little.  I’m firmly of the opinion that bikes should get washed regularly, to rinse away corrosive salts, grime etc.

Debate rages about the most appropriate sorts and seems polarised between those who like bike specific washes and those erring towards household detergents. I’m not fond of the latter but sudsy car wash n’ wax formulas are a useful default, since they impart a layer of protective wax, which also saves time.

Some bike washes are designed to react with water i.e. on contact with a wet frame. In my experience, this isn’t necessarily any better or worse, in the grime shifting stakes. There’s also an argument that visually foaming formulas give the impression of working faster, when in fact, less lively potions bite into and, dissolve the grime more efficiently.  

Either way; rinsing bikes with cold water first strips anything caustic. Using hot simply accelerates the corrosive nastiness. I’ve been sent Guy Martins’ Proper Cleaner for review in another publication. Too early to comment on its performance, relative to others, but the subtle formula has shifted  the week’s accumulated spatter, with minimal user effort.