Wet, Wintry and Wonderful?

 

I long ago switched off from tired cliché’s about life being what we make it (primarily since it’s a blanket statement and life is far more nuanced). Afterall, if this simple rhetoric were true, the hardest working people would have the biggest rewards…

This also the season for boiler bother and I found myself needing to tweak our Grant combi to bring heating and hot water back on track. Well, I had to clean the fixed seemingly every other ride, courtesy of wet, greasy and increasingly cold conditions…Much as we’d expect from later November onward.  

This environment also consumes things like brake pads and chains with consummate, dare we say frightening ease, so I decided it was time to stock up on some more pads, chains and the odd tube and batteries before Christmas. They’re bound to reach retirement while the shops are shut.  

Wheels and tyres are also taxed, since wet, freezing conditions contributes to road erosion potholes, sharps and other nasties are more readily worked in as we ride. For this reason, I err towards reliability and overbuild on working, mountain and winter bike wheelsets.  I want to enjoy the ride with nominal mechanical issues and in due course, stay temperate.  I’m very fond of Muffin’s Continental Contact Plus and Vittoria Adventure tech paring and given the risk of icy conditions, the Schwalbe Marathon Winter spikes stay on Denise’s hoops.   

It should be obvious that this is not a substitute for regular cleaning, inspection and maintenance.   

I’ve added a cable tie to the Sidi Algor’s zipper tags, which has made drawing the zipper fully home significantly quicker and easier. I’ve also needed to adjust the rear Zefal G50 Gravel guard slightly-just a question of slackening the two 5mm Allen screws, moving the guard slightly and snugging down-2.5nm (or bottle cage screw territory). Talking of bottle cages, I also decided to switch the bottle cages again and like the red on teal contrast. 

 After 330 miles, (260 on the fixed) the Muc-Off C3 Ceramic All Weather Lube was still doing its thing, albeit a bit filmy. I’ve given side plates a wipe with a rag dipped in solvent and topped up, leaving it curing overnight, rather than the four hours cited.  I was also pleasantly surprised by how little gunge clung to the derailleur jockey wheels. 

For more intense drivetrain cleaning, I’m a big fan of brushes, less so chain baths, which can work very effectively but are fiddly. Besides, chances are, especially during winter, you’ll need to clean the rings and cassette too. Aside from the obvious need to remove congealed lube and potential contaminant, a lot of lubes can react badly with each other, if there are traces left behind. I'm quite impressed by this Oxford Chain Brush Pro Oxford Chain Brush Pro | cycling-not-racing  

The Castelli Competizione Castelli Competizione Men’s Bib Tights | cycling-not-racing bib tights have become an unexpected default given the changing conditions and fluctuating temperatures. They’re best in cool, dry contexts, although there’s similarly priced competitors offering a DWR (Durable Water Repelling) coating, which can extend comfort on wetter rides. I did add a wash-in product, while washing some Gore Tex and this has extended the time I’ve remained dry, so that’s also an option.

It's also worth saying that not all permanent DWR coatings are particularly effective. I also prefer highly water resistant, breathable garments, those that might allow some moisture through, yet wick quickly. Back in the late 1980s, I used to be happy enough with waist tights, but bibs are definitely the way forward, offering seamless comfort and protection to the vital organs.  

No issues of chill getting in, should a jersey, or base layer gather slightly while you’re hunkered low on the drops, battling those gusty winds. There have come and gone in the last couple of weeks, reaching 60kmh at certain, exposed points.  

I love booties during the winter months, although they can feel a little cumbersome around the ankles and cadence slightly remote, less so with the Shimano MW702 Shimano MW7 (MW702) Gore Tex MTB Shoes | cycling-not-racing slightly more so with the Sidi Algor. This is quickly forgotten in the saddle and while the Algor have some quirks, I appreciate their water resistance, grip and temperate inner climate. The soles are also stiffer than their rating might imply, without compromising the ability to walk gracefully. Staying with winter clothing, Steve has been impressed by Castelli’s Estremo Gloves Castelli Estremo Gloves | cycling-not-racing

 

Chopping n’ Changing

 

A brief spell of thaw saw a switch to my fixed gear winter/trainer for some more spirited saunters around the S bends, while saving sensitive derailleur chains from the ravages of gloop, slime, not forgetting the salt monster. After 250miles, it was a filthy fixed, and the Wolf Tooth lube had been licked clean. By this point it received a richly deserved sudsy bucket clean, and the chains gungy side plates were a perfect opportunity to test the Silca Gear wipes.  

These have two sides. A softer one that’s safe on paintwork and similarly delicate surfaces and a grittier, more aggressive texture for cutting through gunk and grime. I was pleasantly surprised by how effectively it stripped the scuzzy chain bare. Obviously, wipes aren’t the most economical way of cleaning drivetrains (or anything else, for that matter) but used sensibly, they can be highly effective and save time- not every change of lube demands the bike(s) get deep cleaned. 

Ordinarily, I’d purge the chain with a degreaser fluid (or bike wash concentrate) before giving the bike a good sudsy bucket wash, typically using a wash n’ wax formula that leaves a protective barrier behind. Foaming blends look more effective, visually, but those which cling to the host surfaces are most effective, breaking the grime down. I’m defaulting to the Peaty’s Link Lube Premium All WeatherPEATY'S LINK LUBE PREMIUM ALL WEATHER | cycling-not-racing across the fleet since its relatively clean and stays put. The temperature tumbled again and momentary temptation to hop on the fixed was immediately tempered by ice.  

Within a few minutes, I was so relieved I’d opted for Ursula. Along the lanes, I spotted a junior road bike- pre/early teen machine, which someone had cut their teeth on and grown out of. It catapulted me back to the spring of 1986 when I picked up my first road bike- a second-hand low rent machine with gas pipe tubing, brush painted in Hammerite by my father.  

Aside from contemporary components and oversized aluminium alloy tubes, the frameset had been repainted in single pack acrylic (rattle can). A relatively tidy job, suggesting some experienced adult guidance. There’s a lot of fun and learning in building a bike from leftover parts. Wonder what they’ve upgraded to...The weather continued to flip flop, and I hopped back aboard the fixed, only to be serenaded by the resplendent and familiar hiss, amplified by flooded roads.  

The WTB ExposureWTB Exposure Road Tubeless Tyre | cycling-not-racing is a supple, quick rolling and engaging tyre but I’ve found it very susceptible to thorns, flints and hedge clippings. A tiny pin prick was easily repaired but I switched to a fresh tube and the 32mm Pirelli Angel DT Urban Pirelli Angel DT Urban Tyre | cycling-not-racing up front.  They’re quicker than their weight and commuter tag might suggest, though the 5mm thick puncture repelling belt has proven very dependable, despite only covering the centre-strip. Reliability is something I prize during the darker months. Aside from the obvious muck, slime and darkness, roads get rougher as the standing water and freezing temperatures cause erosion, holes and similar, which can be rough on rubber.  

I’d also switched the excellent and seemingly bomb-proof Oxford Aqua V20 Single Pannier Oxford Aqua V20 Single Pannier | cycling-not-racing for my 12-year-old Carradice Super C Rack Bag. A classic, seemingly bombproof design which has 13 litres of carrying capacity-ideal for day riding, especially since I’ve got the Oxford Aqua Bar Bag up front.  

Staying with Oxford, they’ve sent me this rather nice Torque R10 mini ratchet. A slight deviation from traditional multi-tools. The wrench is made from 6140 steel, T25 Torx, 2, 2.5, 3, 4, 5, 6 and 8mm bits are made from S2 steel. It also features Chrome Vanadium Steel adapters (1 ¼ sockets and bit) and two nylon tyre levers. The 1 ¼ sockets mean there’s plenty of choice, so you can build a custom toolkit for different bikes/to suit.  S2 steels are shock resistant and apparently, particularly suitable for socket type tools. Primarily a carbon steel alloy, it also features elements of chromium, molybdenum and vanadium.  

It's also used in the Feedback Sports Reflex Torque Bit Driver, which I've become increasingly attached to, these past few weeks. Elsewhere, though the days are getting very slightly longer, lights are still high on the agenda.  

I’ve been sent this Magicshine Allty 400 front Bike Light. Lower output than I’d usually gravitate to. However, thanks to improvements in diodes, lenses and optical quality generally, lumens alone are not the only deciders. My feeling is it will serve me best as a dynamo companion, but real-world miles may say different.  

 

Spirit Guides & Stem Swaps

 House purchase complete, deeds transferred, and I’ve moved. Garage requires more regimentation, but storage is arriving, and bikes are readily accessible. I’ve been following my nose along the quiet, seemingly civilised lanes and B roads and a correspondingly civilised hour.

Winding back roads are thickly carpeted in mud, reminiscent of Belgium classics (especially in the mist) and cyclo cross meets. The Kenda Kwick Journey KS Plus are surprisingly sure-footed in these contexts, providing excellent feedback and traction. The ½ link chain seems to have settled down and the Muc-Off E-Bike Ceramic Lube is staying put keeping things sweet and serene. Stoical, its seemingly unaffected by muck, subsequent washing and is attracting surprisingly little grot.  

Temperatures are now broadly seasonal, so bib tights it is. I’m defaulting to the Funkier Polar Fleece Bib Tights and the Showers Pass Elements Jacket SHOWERS PASS MEN'S ELEMENTS JACKET | cycling-not-racing (sevendaycyclist.com), the FLR defender continue to do their thing pretty convincingly, save for a few curious quirks.

Pandemic and social distancing aside, people seem helpful but non-invasive, which is the right balance for me. This horse seemed very approving of my fixed gear winter trainer’s spec, but seemingly insistent I switch the Redshift Sports Shockstop Suspension Stem TEST & REVIEW REDSHIFT SPORTS SHOCKSTOP SUSPENSION STEM (sevendaycyclist.com) for the Kinekt Suspension Stem!  

The latter has a more industrial aesthetic and a broader profile, requiring some subtle repositioning of the Geonaut G-Eye Action Cam, which ultimately resulted in a sleeker aesthetic. Spec-wise, the Kinekt in question is 90mm long and with a road typical 7degree rise. The stem components are made from heat treated 6061 aluminium alloy, has an anodised finish and laser-etched graphics. Springs are powder coated and offer 15-20mm of travel.

I’m 70 kilos and sticking with the stock, medium spring for now, since it’s plush without bottoming out, or bouncing around like a pogo-stick.

However, I may experiment with a stiffer spring, since replacement seems extremely straightforward and unlike the otherwise excellent Redshift Sports Shockstop Suspension stem, can be performed with in situ.

The Kinekt is also offered in 105 and 120mm (7 degree) and there’s a 30-degree option in any length you like, so long as its 100mm.

I also took this opportunity to replace the VDO computer’s head unit battery, before it finally gave out, losing all my ride data. To the designs’ credit, it had been registering low battery and had entered hibernation to conserve essential power. Thankfully, a quick rummage through the welsh dresser unearthed a pack of CR2032 button cells.

Batteries swapped and data retained, I needed to reduce the sensor/magnet gap to restore the usually seamless readout. I chose not to replace the sensor battery this time round but will go this route (adding a lick of Vaseline/silicone grease to the contacts) should readouts turn erratic.

I’ve also switched the front wheels around, in favour of the 35mm Continental Contact Plus TESTED: CONTINENTAL CONTACT PLUS TYRES (sevendaycyclist.com) and Shutter Precision SL9 dynohub HALO EVURA & SHUTTER PRECISION SL9 DYNOHUB BUILD (sevendaycyclist.com) 32mm section tyres are generally ample for winter and country roads. The default option for touring bikes during the 80s and 90s (although “fast” tourers often used 28mm). However, some additional cushioning is welcome along the wet, greasy sweeping backroads and the Kinesis DC37 forks KINESIS DC37 DISC FORK | cycling-not-racing (sevendaycyclist.com) have ample clearance for 42c TESTED: VEE TIRE CO ZILENT MARK 2 TYRES (sevendaycyclist.com)