Lube it, Scrub It, Hold It, True Them

 

Though I generally treat fixed and single speed chains to middleweight wet formulas, I decided Muffin’s Izumi to the Weldtite Wax and was pleasantly surprised by how frisky the transmission felt, while remaining serenely quiet. For context, I was averaging 18.1mph in contexts where otherwise I average 17.1mph.

Without lab testing facilities, much of this is easily attributable to psychosomatic, dare I say novelty influence, so many more miles in different conditions are needed before passing tangible comment. Weldtite say by using the double helping technique I should exceed the 300km mark from a single application, but by how much. What influence, if any do damp, autumnal conditions have upon this and indeed, the lube’s other properties.

Plan is to run it through September and early October, then, chances are I’ll switch to the All-Weather Lube.

Staying with chains, I am always interested in new brushes and similar tech that makes cleaning that bit easier. In my experience, one of the biggest problems is keeping the bristles clean and effective long term.

Too much solvent tends to soften them. Wet lubes and contaminant can also be difficult to shift. This seems the case, regardless of price. I’ve found the most effective technique is to soak them in degreaser, work this into a lather and flush them through-twice. First with very warm, then cool water.

Finally dry (and remove any residual grot with clean rag) The long bristle plots, designed for cassettes and rings are the most vulnerable to this kind of contamination. Will be interesting to see how the Oxford compares with These Finish Line Finish Line Grunge Brush Solo | cycling-not-racing and Muc-Off Muc-Off Bicycle Chain Brush | cycling-not-racing     

 

As the miles rack up, I’m becoming increasingly endeared to the M Part Primo Handlebar Tape.

The texture is grippy but with none of the stickiness associated with some. I’m pleasantly indifferent to the tacky tapes and have grown to love some over time. The Ciclovation Grind Touch CICLOVATION GRIND TOUCH BAR TAPE | cycling-not-racing being one example. ENVE  Enve Handlebar Tape | cycling-not-racing is also grippy, though stops short of feeling tacky. Its also very hard wearing and easy to clean.

One thing led to another, and I found myself upgrading Denise's quill stem adaptor from the auction site special to this Profile Design, which is perhaps unsurprisingly, made to an infinitely higher standard, with greater scope for adjustment and clearly marked minimum insert line. I also treated the expander wedge and internal length with some of the Zefal Pro II Grease, which will hopefully keep corrosion and seizure at bay.  These minor tweaks have resolved the minor reach issues.  

While giving the bike a while I'm here once-over, I also noted the front wheel dancing a curious samba. I was somewhat astonished- must’ve caught a rut along a section of newly discovered byway. I switched to the Halo Evaura/SL9 HALO EVURA & SHUTTER PRECISION SL9 DYNOHUB BUILD pairing with the Maxxis Ravager Maxxis Ravager TR Tyres | cycling-not-racing, while I left the Ryde Sputnik/Ultegra dynohub and Mavic Open Pro/Halo Fix-G HALO FIX G TRACK HUB | Seven Day Cyclist Tourin Tests Commuting with Mick Madgett. An opportunity to explore rougher stuff aboard Ursula and I’d been toying with switching the front Mud Hugger Evo Mudhugger Evo Front Mudguard | cycling-not-racing for something lighter and more minimalist to see just how much difference a smaller guard makes.

Mudguards (fenders) have been slowly creeping into the gravel market. I remain seriously impressed by the Mudhugger Gravel Hugger MUD HUGGER GRAVEL HUGGER MUDGURADS | cycling-not-racingbut other, arguably more traditional looking models have been creeping into the market. Some look to be models aimed at folks wanting their gravel bikes to serve as winter road bikes.

Provided your frame has eyelets and you were happy to run just a rear guard, cutting down a voluptuous mountain bike model, just before the bridge is a cheap but effective and done properly, presentable “for pennies” solution. One I’ve toyed with a few times. Old SKS are in some respects idea candidates- broad, really solid chrome plastics and stays, although unless you could pick some up very cheaply, I'd be inclined to repurpose a scrap pair for this kind of duty. 

As September progresses, I’ve been exploring more of the unmade roads and bridle paths, exploiting Ursula's true off-road pedigree into the bargain. Since her restoration last August, with the notable exception of winter spikes during the season's worst, I've kept her as a drop bar mountain bike shod with sturdy cross-country rubber. Despite some limitations, I'm quite fond of the Continental Cross Kings Continental Cross King Protection Black | cycling-not-racing, but more so the CST Patrol, which represent excellent bang for very modest buck.

In common with the Cross Kings, there are some limitations, especially in bogy mud but for hardpack and less challenging stuff, they're surprisingly swift and grippy.  2.25 sections are still practical propositions for older, cross country mountain bike framesets, while offering a decent amount of compliance and even at 50-55psi, ride quality isn't unduly harsh. There's still a decent amount of choice when it comes to 26-inch but few new models are coming through in this size. 

 

Sliding into September

 

After some long, steady miles and pre soggy season prep, I began contemplating stem lengths and wheel switches. Switching Denise to the WTB drops was a good decision. However, I’ve concluded I needed a shorter extension, since my proportionally short torso means I’m feeling a little stretched.

Cue a quick wander round the web and this 25mm long CNC machined unit from the Far East (of all places!) True, it lacks the exotica or refinement of some, but I was keen to ensure I’d got the correct length and could upgrade later down the line, should need arise. May also upgrade the quill adaptor-had to deal with some reticence when slackening, which ultimately led to discovering the expander wedge shedding its threads. I’ve replaced with one from the spares box and acquired this higher-end replacement and will substitute in due course.  While price typically reflects quality, it’s important to ensure a couple of things.

Firstly, don’t default to the Aheadset method, leave a millimetre or two of the top proud. Secondly, once you’ve everything aligned, ensure you’ve got some grease on the wedge and bolt before torquing it down to around 16nm. The wedge should be well and truly lodged in place- no wibble when rocking the bars as you might when turning sharply, say on as fast descent.  

 There are folks who really dislike quill converters full stop and there are a few options. Have a skilled frame builder add a threadless steerer to the existing fork crown- as Lee Cooper did here Oldie But Goodie: Fork Repair & Revision | cycling-not-racing. Alternatively, Inn Cycle offer a threadless conversion headset. Never seen one in the flesh, so can’t comment but they do look well engineered. Custom quill stems are another option.    

Mick Madgett built the Halo TK hub into the Ryde Taurus rim, which led me to switching Muffin’s Mavic Fix-G. HALO FIX G TRACK HUB | Seven Day Cyclist Tourin Tests Commuting and giving it a good clean.  The sprocket had become quite scuzzy given a few weeks in very hot conditions, turning the Weldtite TF2 All Weather Lube runnier and stickier, so it attracted more dirt. 

It will be interesting to see how the newest PTFE- free version fares in this and other respects. Both variants penetrate the chain’s inner sanctum very effectively and I’ve found the original very effective on fixed gear and single speed chains. Switching Muffin’s rear wheel has me wondering if the chainline was very slightly off with the Fix-G hub and I might need to revise the spacer widths to correct this.

Weldtite has also sent me the latest incarnation of a drip wax they’ve been working on for two years. Claimed to return 300km (186miles) in all conditions, not just balmy summer days, I’ve fed some to Denise’s KMC and Muffin’s Izumi and will see how it fares in the coming, increasingly autumnal weeks.

Generally speaking, I default to middle and heavier weight oils, rather than waxes, or more exotic blends when it comes to fixed and single speed chains. However, fair weather conditions and curiosity are why I’ve gone the wax route. Weldtite suggest you can double up for higher miles per application, so I’ve taken this route, without being overly generous.  

Curing times are influenced by temperatures and other factors, including humidity.  

Deep cleaning recipient drivetrains is essential when it comes to waxes and indeed, lubes of different genres. Applied in temperatures around 20 degrees and given a 45 second shake to mix everything thoroughly, it emerges from the spout very predictably, as middleweight creamy emulsion. Not one I’d risk applying indoors, mind. Curing times are in hours- bargain on four in these temperatures, leave it overnight if you can.

 When cured, it assumes a clear glazed state.  Formative impressions suggest low friction and crisp shifts. The bigger question will be how it sheds contaminant-does it attract less grime, is it one of those that flakes away when contaminant gets trapped in the outer layer, flaking off at a certain point to leave a thinner lubricant layer behind… I’ve reached my conclusions regarding the Silca Nastro Piloti Bar Tape Silca Nastro Piloti Bar Tape | cycling-not-racing, which has (and continues to impress with its rugged, grippy natue-impressive in the wet and offering excellent connections with the bars.

Staying with wet stuff, I’d decided it was time to enjoy some forest and bridlepath fun aboard Ursula- I also wanted to see how the Continental Cross Kings and FLR MXT Vibram Trail Shoes coped with bogy mud. Spoiler alert, feet had more traction than tyres. Having ridden a few miles along some mixed, unmade roads and green lanes and generally enjoying ourselves, I couldn’t resist some very goopy bridlepath.

Whoosh…Big grin was quickly substituted by surprise as we hurled in slow motion towards a hedge. Mercifully, the resilient and relatively soft foliage caught our imminent slide, and I slowly came to soft earth, protecting Ursula into the bargain.  Knobblies had definitely become slicks, and as I suspected, the FLR’s Vibram soles will attract soft gloop. However, as I’d hoped, they do shed it surprisingly well- no issues with clipping in and out.  Having returned, I wasted no time in giving Ursla a justly deserved sudsy bucket wash, drivetrain purge, polish and switch to this Weldtite Wax. 

Forest Frolics & Rainy Reveals

 

The rains came, which was welcome on so many levels and perfect for assessing the performance of tyres and shoes in wet, slippery contexts. I was particularly keen to see how the latest generation of Continental Cross Kings would bite when things tuned slippery, dare we say boggy. They bit and subsequently cornered better than I was expecting but time and  more intense gloop may say different.

They are quite sprightly over hardpack, loose surfaces and indeed, metalled road, although as defaults, I remain impressed by CST Patrol. CST Patrol Folding EPS Tyres | cycling-not-racing I’ve been forming the opinion that the FLR MTX are best suited to broader pedal platforms. Ursula’s Shimano M757 seemed more supportive than more modern dual sided designs and I’ not sure why.

These first generation tend to clog with mud noticeably quicker. I noted some Juice Lubes Bearing Juice creeping from the bodies. Maybe I’d been a little too generous, a little too liberal but we’re talking creep, not oozing. I was also impressed by how well the NOS SR Suntour mech scooped the chain between rings- snappy and reliable, even under load. Sure, it seemed fine on the stand, and designed for a triple, there’s plenty of throw. However, stuff can play impeccably on the stand and misbehave on the road, or trail.   

Upon returning and giving both of us a good clean, using up the last of the Nzero degreaser NZero Bike Degreaser | cycling-not-racing and indeed, the Peaty’s Link Lube All Weather. Then was also the time to switch pedals- I went for the A530 since they should bring out the FLR MXT’s best qualities.

Horses for courses, essentially. While I default to gravel and cross-country mountain bike shoes for general riding, road included, since the soles are stiff but still compliant and grippy enough for walking but are a little too sporty for more adventurous outings, touring particularly.  

These Sidi Aertis are another design that bridge the gap between mountain biking and gravel, although, riding with merino blend socks, I wasn’t surprised to find myself with wet feet given twenty minutes in a heavy downpour. Mercifully, the shoe’s profile means thinner waterproof socks are also realistic (and would be a must for me, during the winter months, although I’d probably switch to the Shimano MW7 Shimano MW7 (MW702) Gore Tex MTB Shoes | cycling-not-racing) by the time things turn wintry wild).

A touring shoe of the FLR’s genre also has scope for waterproof socks. Much as I anticipated, the FLR kept persistent rain at bay for an hour before it became palpable. Fine for commuting and similar duties without recourse to toe covers, overshoes etc. 

Flex was more palpable when on the fixed and charging up the climbs, but I didn't want to go for a single sided, hybrid design. Even though the bottom bracket gives a sporting chance when cornering, there's greater clearance with the Shimano 540 and being dual sided, it's easier to clip in and power away-say at the traffic lights.   

Talking of lights, the new seasons models are beginning to become available. I've been sent this Cat Eye Tight Kinetic, which is impressive for the price. A "braking" function for £23 would've been unheard of, just a few seasons back. I've also received this Lezyne Flow Cage SL Enhanced.

I regret passing my last pair of Lezyne flow on, so was rather pleased to be sent another for testing. Left- and right-hand specific models are nothing new, but some are definitely more ergonomic and though debatable, arguably one of the last words in customisation. On a strictly personal note, Lezyne’s are the best I've used to date.    

Side entry cages are what's called for on smaller compact geometry framesets, since you can both fit and access bottles without catching knuckles on the top tube, or indeed, frame fit pump-should you run one. They’re also a good fit for gravel and bike packing contexts where you’re running a bag within the main triangle.

 I'm a convert to the mini compressor type inflators, at least for roadside rescue, although Muffin, Ursula and Denise still carry a Topeak Road Master Blaster. Muc-Off Airmach and Lezyne as reliable, efficient backups.

The rains and wet roads were really useful from a testing perspective, although I wasn't surprised to discover things performing as I'd expected. However, standing water meant bikes were suitably filthy given a few outings. I'd seen some bike wash going silly cheap and was keen to see how it compared with some premium blends, not least since I was down to the Stan's No tubes.

 I tend to give bikes a good wash n' wax, since they cut through the grime, while leaving a protective wax barrier behind. Nonetheless, I don't always want to take this route and bike washes still have their place. 

I was pleasantly surprised by how effective the budget potions were on heavily encrusted organic grot, although as I'd hope it's not potent enough to strip oily, or greasy stuff. I reached for this Dynamic drivetrain detox to strip the residual Peaty's Like Lube and modest contaminant from the rings, chain and cassette.

Having exhausted this, I've switched to TF2, which is a competent and inexpensive all-weather formula that holds out well in moderately wet conditions, although attracts more contaminant than more sophisticated blends and also contains PTFE, which isn't particularly kind to us, or the wider environment. Formative outings on Muffin suggests the thru axle to quick release conversion is very dependable and seems slightly stiffer than traditional quick release configuration. I've also gone for the slightly narrower (38mm section) Vittoria adventure tyres, which run at a similar pressure to the Continentals and gives a little more clearance around the Gravel Hugger front guard.  Talking of tyres, here’s my review of the Maxxis Rambler Maxxis Rambler Tubeless Ready Tyres | cycling-not-racing

Shakedowns & Subtle Tweaks

 

 Built, checked and tweaked, it was time to take “Muffin” the Mulo for a quick 15mile shakedown ride. I’d erred on the side of less chain tension with a view to dialling it in, rather than too tight.

Perhaps unsurprisingly, given my switch to 40mm tyres, the ride quality was much smoother, though it wasn’t difficult to coax “Muffin” up to speed and keep on the boil- 41cm chainstays certainly help. The front end also feels more responsive, without being twitchy, and the frame’s lateral stiffness is also an improvement over the otherwise very loveable V2.

Predictably, I needed to tweak the Aheadset bearing tension and found myself switching the TRP Spyre for its loftier SLC stablemate, having given the calliper a good clean and replaced the pads. Three rides in and I detected the ring bolts needed snugging down slightly. A small, insignificant job…

However, my Park pattern tool that holds the collar still while you tighten the 5mm/T30 Torx bolt wasn’t arresting the collar properly. This prompted purchase of a T handle design from a well-known London bike dealership that I frequented regularly when living in the capital.

Given it was a bank holiday weekend, I had to wait a day or two, which presented an ideal opportunity to hop aboard Ursula and get some miles in on the Continental Cross Kings. Having enjoyed a frolic through the forests, I found myself being chased by an incredibly determined goose. Mercifully, I was able to outpace-either that, or the goose recognised I wasn’t a threat.

550 miles racked up with The CST Patrol, I’m generally impressed by their capabilities as wallet-friendly all-rounders, although I’ve noted the Continental Cross King Black Chili require less effort to coax up to speed in comparable contexts/conditions. Puncture resistance, specifically vulnerability to hedge clippings and similar sharps was an issue I’d had with earlier incarnations of the Cross Kings, so it will be interesting to see how influential the Black Chili compound is. While testing the CST Patrol’s prowess, I happened upon a completely deserted stretch of unmade and sometimes quite technical gravel road.

I’d had a quick exploratory hoss along the bridleway on previous occasions but was deterred of further exploration due to farm traffic and general agricultural activity. The Patrol coped handsomely, offering excellent traction, control and indeed cushioning over the lumpy, bumpy and sometimes pot holed route, which ran for a mile or two.    

I’d also switched from the Motorex Wax Lube to Peaty’s Link Lube All Weather courtesy of Dynamic Bio Drivetrain Detox. The Link Lube All Weather is best thought of as a bridge lube for those conditions where you want something more substantial than a wax, or dry formula but with a friskier shifting and feel than traditional middleweights.

Wax chain lubes may be less stoical than other types, but in my experience, they can congeal quite stubbornly, particularly on rings and cassettes. While the Dynamic was visually engaging and crucially stripped the rings and cassette clean with nominal effort, it was slower acting than some degreaser stocks I’ve evaluated over the years.

Water must be applied to the hosts beforehand and The Drivetrain Bio Drivetrain Detox left to marinate for two to three minutes, so one of those formulas seemingly best suited to holistic bike cleans, rather than situations where the bike’s fundamentally clean, but you just want to change lube.  It’s also reckoned sufficiently potent to strip waterproof greases, so we’ll see. 

Back to “Muffin” Chain ring tool in hand, I whipped out the Park Tool Wrench, dialled it up to 10nm, introduced the crank bolt tool-Huzzah! Another little job done. Talking of torque Wrenches, here’s my mini budget model group test Three Budget Torque Wrench Test | cycling-not-racing

 

 

  

Emerging from the Garage

 

A busy week. Having got Meg, the Magic Micra serviced and MOT’d and narrowly avoided acquiring a 1992 Suzuki GS500E project, I sought solace in the garage and continued stripping my fixed gear winter/trainer, cleaning parts before transferring them to the Mulo frameset. Some things were bin fodder, others model specific. The Mulo’s head tube is tapered, 1.5 inches at the base, which wasn’t problematic since I had an integrated Cane Creek cartridge bearing headset and compatible fork that I’d bought for metaphorical pennies a year or so back.

The problem being, I didn’t have a suitable setting tool (rammer, in casual parlance). I didn’t want to purchase another, spending money and wasting time, so headed out to my local mechanic brandishing biscuits. They kindly set the crown race down, while I was doing a Tour De Morrisons and I returned the favour with a twin pack of chocolate digestives.

I returned and began building the frameset, having applied helicopter tape and old inner tube to select areas, coupled with liberal helpings of waxy corrosion inhibitor within the frame’s inner sanctum and allowing it 24 hours to cure. Liberal helpings of Juice Lubes Bearing Juice to the bearings, a lighter application to the crown race. Elsewhere, I opted for Oxford Mint Assembly Grease Oxford Mint Assembly Grease | cycling-not-racing since it’s a sturdy, carbon compatible blend.

Everything came together surprisingly easily, save for a schoolboy error-me mounting the new ring inboard of the crank spider, bring everything flush against the chainstay. An easy fix but consumed some time. Wheels and chain followed- I’d gone for the 40mm Continental Pure Contact since clearances allowed.

I’d opted for the beefy Izumi 410 and the 17tooth Halo sprocket means a gear of 69inches. Easily tensioned, I fitted the Gravel Hugger guards, then the Topeak Super Tourist DX 2.0 Topeak Uni SuperTourist 2.0 NonDisc Rack | cycling-not-racing- a light coating of Oxford Mint Assembly Grease on the treads and forming a seal so the elements couldn’t sneak past and cause mischief.  I decided to call it a day, popped the Mulo away. I revisited with fresh eyes two mornings later.                     

Some Leatt SPD arrived for testing but for the time being, I'm sticking with the ultra-dependable and long serving Shimano M540, switching the Leatt between Denise and Ursula to assess their mud shedding trail capabilities first.  The Leatt Endurance 6.0 are intended at cross country mountain bike and gravel audiences and have a reassuringly high specification. 6061T6 aluminium alloy bodies (shot peened to prevent stress fractures turn on cro-moly axles) and more interestingly, a LSL self-lubricating bushing, a needle bearing, and an industrial roller bearing. Quad seals promise to keep the grease in and elements out. Stainless steel bindings and Shimano pattern cleats continue the durable narrative.   

On the topic of mud, I continue to be impressed by the CST Patrol, which though not the lightest of cross-country rubber, seem to perform consistently well across a broad range of conditions, while proving highly puncture resistant. No punctures to date.

Loosely comparable with Continental Cross King- another cross-country design with quick rolling charms and modest weight but in my experience, prone to flats-flints and hedge clippings specifically. Continental have sent me the latest versions, which now feature the brands black chili technology. This is a sophisticated polymer promising to improve grip, rolling resistance and wear. It will be interesting to see how they compare with the CST Patrol, particularly on the reliability front. The Continental sport a similar tread pattern and also feature a fibrous puncture repelling weave beneath the belt.

Staying with puncture resistance, I’ve experienced two pinhole flats over the course of two consecutive rides with the rear Pirelli Cinturato, leading me to switch the rear for Maxxis Ravager Maxxis Ravager TR Tyres | cycling-not-racing Thankfully the tubes only succumbed to a tiny pin-prick, so easily patched and returned to the Zefal Adventure R11 ZEFAL ADVENTURE R11 WATERPROOF SADDLEBAG | cycling-not-racing . The Muc-Off Airmach Mini Inflator Muc-Off Airmach Electric Inflator Pro | cycling-not-racing has proven an absolute godsend on these occasions, especially since I needed to be back pronto to facilitate a few things.

During this phase, I removed Ursula and Denise’s seat posts, blasted some Supertrol into the seat tubes, added another lick of grease to the posts, refitted, nipping them to 5 and 6nm respectively with the Velo Tool Mini Adjustable Torque Wrench. This also gave opportunity to refine Ursula’s saddle height, raising the Kinetic 2.1 Suspension Seat post KINEKT 2.1 SUSPENSION SEAT POST | cycling-not-racing a further few millimetres.