Showing posts with label Spring cycling. Show all posts
Showing posts with label Spring cycling. Show all posts

Monday 26 April 2021

Released & Regreased












 

A slotted “screen break” and the arrival of this Park FR4 freewheel remover presented the ideal opportunity to tackle the Teenage Dream’s Regina freewheel. I’d applied several helpings of PTFE lube and left it marinating for several days, so a sporting chance of it budging and without taking the Athena’s hub threads into the bargain. I switched the Shimano head on this Cyclo tool for the Park, gave the freewheel another firm blast of PTFE lube, then engaged the tool. No surprise that the Park’s splines meshed beautifully with the Regina’s.  


However, despite some considerable effort, nothing was moving. Another blast of PTFE-based lube was followed with a few deft taps from an “engineer’s” mallet to the tool handle. Holding the wheel firmly with my left hand, applying considerable pressure to the tool with my right while grunting like an 80’s shot-putter secured movement and ultimately release.  


Threads unscathed, I decided to give the freewheel a liberal helping of Muc-Off fast-acting degreaser to remove congealed brown gloop. A mix of propellent and strong solvent rapidly bites into the grot, breaking it down but still demands liberal stiff-brush agitation.  


Dinner plate clean required a subsequent helping of Squirt Bike Wash Concentrate, some further agitation, and finally, a warm water rinse.  same story with the hub threads. As I’ve said in an earlier post, they’re not badly “out of round” rather nuisance value, and now is the time to correct that.  


At this stage, deadlines were my priority, so I packed everything away, penciling in the hub strip and re-grease for another time. Not least as I couldn’t find my 14mm cone spanners and am “on the clock” during the week. Sure enough, I found my cone spanners and got busy on Saturday afternoon, following my first AstraZeneca COVID shot.  


Everything came apart reasonably easily, although the existing grease had turned the consistency of gravy. 9 bearings each side and the cones were decanted into a magnetic parts bowl. I gave everything a liberal blast of the Muc -Off High-Pressure Quick Drying Degreaser - Chain & Cassette and a quick clean rag scrubbing later brought everything up to spec.  


No signs of pitting/similar damage, so I pumped a load of Park into the races, repatriated the bearings, setting them into the thick green gloop, before adding another generous piping over the top. Same story with the hollow axle before sliding this through and winding the cones and other components home.  


Getting the tension bang on took some perseverance-so close each time but still a fraction too tight/slack. Paid off in the end. The front wheel was much easier, although again, the grease had turned to an oily brown gravy. Two blasts of the Muc -Off High-Pressure Quick Drying Degreaser - Chain & Cassette dismissed this and evaporated I the time required to locate the Park Grease.   


I’ll drop the wheels to a well-respected local builder for truing, as opportunity presents.  Common side effects (head cold type symptoms-aching limbs and minor headaches etc) kicked in that evening. I managed a ride beforehand and another the following morning but felt distinctly rough during the day, then onward. 

 

Mornings remain cold and crisp and at the lower end of single figures. I’ve stuck with tights and winter booties and alternate between winter weight, long sleeve jerseys and summer weight models with these Primal Comic Book Thermal arm warmers PRIMAL COMIC BOOK THERMAL ARM WARMERS | cycling-not-racing (sevendaycyclist.com) and a technical jacket. This 7mesh Cypress Hybrid Jacket 7mesh Cypress Hybrid Cycling Jacket | Seven Day Cyclist being a great default. Gilets are another wise investment.  


The really thin, shell types are great for contingencies and very changeable conditions since they pack small but I’m rather fond of middleweight designs with a laminated fabric, which will keep the torso temperate and relatively dry. They often have pockets, which is another welcome touch. My preference is for those with the classic three terrace rear, zippered breast up front, perfect for stowing compact camera and similar tech, I’d want ready access to.  

      

Thursday 1 April 2021

Springing Surprises









 

Spring is here and along with it, longer days and traditionally changeable weather. Something of a British obsession, although I've found Belgian and the Netherlands less predictable through Spring. Mild enough that I’ve been temperate in the evenings wearing a full-length base layer and jersey. This Prendas Ciclismo Bordeaux Paris Long Sleeve Jersey PRENDAS CICLISMO SHORT SLEEVE JERSEY | cycling-not-racing (sevendaycyclist.com)  Though a micro jacket, or this 7Mesh Cypress Hybrid Jacket 7mesh Cypress Hybrid Cycling Jacket | Seven Day Cyclist usually comes along-either from the start or stowed away in the Zefal Adventure R5 Waterproof Saddlebag ZEFAL ADVENTURE R5 WATERPROOF SADDLE BAG | cycling-not-racing (sevendaycyclist.com) and it’s bigger R11 counterpart. Both are becoming serious favourites and the R11 is surprisingly stable, given it secures to the post via a single strap.  


Farmers are busy harvesting Sugarbeet, and the roads dotted with mud from the fields, which I’ve tended to weave through on the fixed gear winter/trainer, to see if I could fox the frisky Bontrager AW3 Hardcase Lite Reflective Road Tyre. (Short answer’s no, in case you were wondering), and I’ve just relaxed and enjoyed their compliant, speedy characteristics. IRC Roadlite X Guard tyres are another speedy option if you’re looking for a narrower section. INOUE ROADLITE X GUARD TYRES | cycling-not-racing (sevendaycyclist.com) 

Staying with the Schwalbe GT365 and Marathon Mondial pairing on the Univega but here are my thoughts regarding the Billy Bonkers SCHWALBE BILLY BONKERS TYRES | cycling-not-racing (sevendaycyclist.com).  


300 miles down the line and I’m almost convinced I’ve got the gearing right for most of my riding contexts and needs. Enough torque for the trailer and/or dignified, seated climbing, bridlepath blasting and without spinning into orbit on the flat.  


I’ve also found it necessary to add another washer to the “cassette” side of the Fix-G hub, since the fat foot sprocket had begun to slide about on the splines. Snugged the lockring down and will keep a closer eye, going forward.  Sticking with the Weldtite Ceramic Lube on both bikes, since it seems a solid seasonal choice. WELDTITE CERAMIC LUBE | cycling-not-racing (sevendaycyclist.com) 

I’ve also switched from the FLR Defender MTB Thermal Dry S-Tex Boot FLR DEFENDER MTB DRY BOOT | cycling-not-racing (sevendaycyclist.com) to the FLR Rexton Active Touring/Trail Shoe FLR REXSTON ACTIVE TOURING/TRAIL SHOE | cycling-not-racing (sevendaycyclist.com) and I wasn’t expecting such a difference in sole stiffness. The Rexton are efficient but the Defender’s increased rigidity are quite palpable. I dare say I’ll be alternating between them, given Easter and April’s tendency towards the unpredictable.  


Elsewhere, I’ve been erring towards ¾ , such as these Funkier Rie Flo Men’s Three-Quarter Length Summer Bib tightsFUNKIER RIDE FLO MEN'S 3/4 BIB TIGHTS | cycling-not-racing (sevendaycyclist.com) or the Primal Dawn Men’s Bib Knickers TEST & REVIEW: PRIMAL DAWN MEN'S BIB KNICKERS (sevendaycyclist.com) rather than full-length tights and lighter gloves-the Chiba Pro Safety Reflective Gloves CHIBA PRO SAFETY REFLECTOR GLOVES | cycling-not-racing (sevendaycyclist.com)  and liner types, depending on whether I’m heading out early in the morning, or during the evening.  


I reflect on many things during my ride. Product quirks and performance are the most obvious, but two-wheeled escapes are very conducive to other forms of contemplation.  

  

There has long been a narrative that automation/digital technology would render many roles, peoples and communities excluded. Car assembly lines are the most obvious examples of this in action. Automation hagreatly reduced the need for repetitive tasks such as spot welding- the robot arm being a common sight since the early 1980s.  


More topically, the UK government have announced they will be reducing military personnel. The public likes the “Boots on the ground” rhetoric but, cyber-attacks, the deployment of drone soldiers, rather than humans will be more prevalent.  


Taking things to their logical conclusion, it is more likely that a hostile nation will launch a missile attack from someone’s wi-fi enabled kettle in the recipient country, not send fighter planes. Indeed, taken to its logical conclusion, liability could even be levelled at the unwitting householder.  


Contemporary cars are stolen by digital stealth, rather than physical attack. Nothing to stop a malicious person with the appropriate skills could disable components of the engine management system, inducing breakdowns, disengaging the brakes, using a remote computer.  


Machines, and other technology that can “think” for themselves are very much here to stay. HGV driving will still be a trade, requiring human labour but I suspect this will take the form of a lead driver with two, possibly more couplings tracking behind via a wireless signal. In common with other aspects of logistics, I can envisage the driver, rather than haulier, being required to hold specific liability insurance cover.  


The reality, which some seem unable to accept is the fact many people will quickly become redundant and possibly permanently, economically inactive. Leading to wider, social exclusion. One argument suggests that this need will be met by humanoid companions, both romantically and in terms of physical care. However, this technology is going to require considerable financial means. Means which these strata of people will have no access. How governments will respond (if at all), remains to be seen.