Thursday, 21 July 2016

The Joy of Workhorses



Stripping and thoroughly re-greasing the Univega’s M475 hub cured the grumbles and confirmed freehub and other components had many miles left in them. 

Edinburgh Bicycle Co-operative is sending Seven Day Cyclistwww.sevendaycyclist.com  the latest incarnation of their wallet friendly ‘Cross 2 for testinghttp://www.edinburghbicycle.com/products/revolution-cross-2-16?bct=browse%2fbicycles%2fcyclocross-bikes.

I have always been impressed by their range and was particularly taken by their Cross 0. http://www.edinburghbicycle.com/products/revolution-cross-0-16?bct=browse%2fbicycles%2fcyclocross-bikes  

On paper at least, this seems very befitting to the 0. Working bikes certainly aren’t the ceiling of our horizons at SDC but we’re firmly of the opinion that decent workhorses are vital members of any enthusiasts’ fleet.

Well maintained but rugged,  you’re not afraid to face the salt monster’s caustic tongue, or leave them shacked to street furniture, yet said swinging a leg over their top tubes and powering off, induces those ear-to-ear grins.

Essentially, the 0 is a single speed ‘cross inspired package featuring their in house “Strongman” 7005 series aluminium frame with mudguard and carrier fixings for four seasons’ practicality.Hi-tensile steel forks add some additional girth and personally, for the sake of a few pennies, I’d prefer to see basic Cro-moly blades. 

“Cross inspired” geometry is a refreshingly honest phrase, which refers to generous clearances, rather than off-road pretentions per se. Taking of which, there's room for 35mm tyres for a compliant, magic carpet ride over pock marked asphalt.

Reducing things to a balance sheet decision, this member of their cross family would easily pay for itself within three months of short-middle distance commuting. Monies saved on train or bus fare could be ploughed back into the household coffers, or other two-wheeled projects...  

Given this backdrop, I didn’t need much persuading to take a closer look at its more refined sibling. Sharing the same non ferrous tubes, this one follows the adventure/gravel bike narrative. 

Tektro Spyre mechanical discs caused quite a stir when they first came out about three years back and for very good reason. In retrospect, I’m wishing I took that route, rather than the otherwise extremely agreeable Avid BB7 presently gracing my own ‘cross inspired fixer’s fork blade.


Twin pistons sound more complex but having played with them (albeit briefly) modulation and feel with lower-mid range levers and compression cables is reassuringly good. Lower profiles are another definite plus, improving heel clearance, while taking the faff from rack fitting. Shimano’s 8x3 Claris groupset also fits the design brief handsomely.

There’s enough range for bombing, cruising and winching, whether lugging a trailer’s worth of kit on a weekend tour, or just doing the weekly shop. Yes, there’s some scope for less challenging rides on the wild side too. 

Shifts are crisp but everything’s cheap enough to replace in the event of a nasty spill. Shunning full-length guards, clearance looks generous enough to accept a narrower (35mm) section spiked tyre for dependable bite through winter’s worst.

Anyhow, I’m really looking forward to swinging my leg over its 55cm top tube and seeing how the whole package behaves over the course of a few hundred, real world miles…Talking of the Ilpompino, nipping the Aheadset bearings quarter of a turn tighter ironed out some trace wibble that set in after 150 miles.

After rummaging in the bodge box for a spare spoke mount (think my malevolent farm cat scattered the old one irretrievably beneath the freezer/drier) I bought a “Blackburn” replacement for the princely sum of £2. Fuchsia Knog Nerd now pride of place and fully functional.

Found some time to review the Tom Tom bandit’s footage. By my reckoning, image quality is level pegging with Go-Pro’s 3; although the microphone is proving surprisingly susceptible to wind blast.

Think I’ll invest in the remote trigger upgrade when circumstance permits…KA decided to chomp through its rear brake shoes last week, with audible protest on the M1. Thankfully, no other component damage done and friendly local garage sorted it for £75 including VAT.  Hmm, hopefully that signals the end of this most recent spate of implosions...