While Mick Madgett was working his wizardry on the Ryde Andura/XT hoop, I discovered I’d added to much tension to the fixed gear winter trainer’s chain. Since the sun had its hat on, I headed out for a couple of sunny rides on the Holdsworth. Afterall, that’s what it's for.
The Schwalbe One 365 gives a very quick, supple ride quality, in contrast to the Freedom Thick Slick’s coarser but ultimately durable casing- which stays on the rear for precisely this reason. I like the slightly odd couple pairing, so they stay. The Blub Wax lube is also staying, just to see how well it behaves in drier contexts. Like most waxes, it's self-cleansing, so but anecdotally, there’s less friction. However, in common with its ceramic stablemate, if the bike’s not been ridden for two days, you’ll need to replenish.
Not so the Wolf Tooth WT-1 All Conditions Lube. Three hundred miles hence, I’m still on the first application and it’s proving extremely clean, even in the wet. The links looked a little parched but touching them confirmed a tangible, filmy layer remains. This suggests their claims of 400 miles per application is more than salesmanship. I’m told it’s a synthetic blend made in partnership with SCC Tech. One that binds to the chain, while the detergents cleanse the dirt as you ride.
Back to the fixed Gear winter trainer, I’m starting to discover some vulnerabilities in the Pirelli Angel DT Urban Tyre Pirelli Angel DT Urban Tyre | cycling-not-racing (sevendaycyclist.com) puncture repelling belt- the third flat (thankfully a slow puncture) at the rear. This struck following six miles of gritty backroad- a flint had worked inside the rear tyre’s shoulder (the puncture repelling strip only covers the centre strip).
Saddleback sent me these 700x40c WTB Nano. They’ve been around a few years and found a lot of favour among gravel audiences and seem to follow a similar mtb tread in gravel sizing narrative.
On paper at least, they should be an interesting and very relevant comparator. Of course, with the return of said wheel (which took Mick ten minutes to tame) came the tyre conundrum...Being as I already had the tyre off, it I thought it rude not to slip the WTB in situ. Effortless just using my thumbs.
Much as the Maxxis, I introduced 50psi, fitted the wheel and then decided I’d switch the misbehaving CX50 in favour of the Suntour SE. The latter fight back a bit (though less than I was expecting) and they’ll need some fine tuning.
For the uninitiated, these are a late 80s design which employ an internal mechanism that moves when the pads strike the rim, applying more braking force. For these reasons, these should not be run up front (unless massive “stoppies” and being launched over the bars, cartoon style is your thing.) I’ve had a few tentative outings in monsoon conditions and can confirm they’ve enough power to lock the rear wheel, deployed in anger.
For the time being, they’re behaving well enough, so I’ll quit while ahead and leave them be. I’d bought another pair, NOS for £10. I wouldn’t pay retro prices for them but couldn’t resist, given their performance. Staying with brakes, I had to tweak the front barrel adjuster and couldn’t find a suitable 8mm open wrench. Ironically, this pressed steel “giveaway” spanner saved the day.
During this phase, I also switched the saddle. 300 miles hence, the five-year old Pro Turnix Gel Saddle was proving less supportive to my sit bones than I’d expected. I’ve opted for the Ritchey WCS Cabrillo, which at 260mm long and 146mm. Shorter and a little broader.
Formative impressions are positive, so I’ll er, sit tight and probably switch for the Ergon SR All Road for comparative purposes. 100 miles hence, I’m warming to both the Maxxis and WTB, which at this point are proving remarkably similar. A little slower across tarmac but compliant, predictable and very swift through mud, dirt and loose stuff. They’re also proving reassuringly good at shifting gloop, thus not becoming slicks at the first hint of a boggy section.
