So, as predicted, I switched chain lubes, from the Zefal Pro Dry Chain Lube https://www.sevendaycyclist.com/zefal-pro-dry-lube to the Weldite TF2 Ultra Dry Chain Wax https://www.sevendaycyclist.com/weldtite-tf2-ultra-dry-chain-wax which also led to closer interrogation of chain length.
I decided to prune the KMC by another few links, which made for crisper shifts but without putting the rear mech under undue load. Ironically, the Weldtite TF2 Ultra Dry Chain Wax also coordinated with the celeste Jagwire Pro Road Brake Kit https://www.sevendaycyclist.com/jagwire-pro-road-brake-kit cables and See Sense Bar Bag’s cargo net.
April has been markedly drier and quite sunny, compared with previous months, so the cleaner running dry wax seemed an obvious choice, entering May. It’s one of the cleanest, temperature stable wax formulas I’ve used. Meanwhile, Steve has been putting Rock n’ Roll Holy Cow Chain lube through its paces https://www.sevendaycyclist.com/rock-n-roll-holy-cow-chain-lube
During a moment of (lockdown?) madness, I contemplated adding another (22-24 tooth) 94 BCD ring to the old school LX crank and wiring up a front mech (probably the Microshift centos).
Yes, I would’ve had an even greater range. Gearing with enough grunt for riding up down and along the Great Wall of China, with low slung trailer en tow. However, the faff of trying to get a road front mech to play nicely on a frameset intended for top pull front mechs (Yes, I know Problem Solvers make a fetching adaptor), the added weight and complication means it's staying on the drawing board.
A subsequent 20mile loop affirmed trimming chain length paid dividends. It also confirmed switching to those Continental’s nigh on slick tread have improved my tubby tourer’s responsiveness, while providing a supple, magic-carpet ride, ironing out washboard and more overtly pock-marked tarmac.
Just how much speed and ride quality preside over puncture resistance remains to be seen. I’ve also been playing musical rubber on my fixed gear winter/trainer. This time, we have these 60tpi Kenda Kwick Journey KS+ in 32mm sections. Slightly narrower than my 35mm default but frees up some space at the rear triangle.
In common with some old favourites, these employ a 5mm thick puncture resistant belt. That said, it only covers the centre strip, rather than running edge to edge, which might leave them more susceptible to sharps. Thus far, they’re reasonably swift and corner better than I’d expect. Mucky, gritty stuff and stones get impacted within the tread, leading to that annoying tick-until it’s ejected, or extracted. Those folks who are particularly puncture prone might like to bolster otherwise sound tyres with the Tannus Insert Armor https://www.sevendaycyclist.com/tannus-armour
Having resurrected those Scott Sport shoes, I was surprised to find the sole’s lip coming adrift. Thankfully I had some suitable glue, you know, the one for the toughest jobs on the planet...However, I couldn’t find a way of binding it to the upper... Enter, this old nylon toe strap. So, hang on to them if you’ve gone clipless, they’re surprisingly useful. The glue had seemingly set two hours later but much like the lube, I left it curing overnight-just to be sure.150 miles in and it’s holding up just fine.
