Tuesday 29 December 2015

Happy Holidays













Managed to steal away to the midlands for a few days and got a look at John Moss’s new fully faired Sinner Mango. He only took delivery the week before and I first spotted him whizzing past on Christmas morning while I washed and waxed my KA.

Frustrated at finding myself bereft of camera, thus missing that moment, I subsequently emailed John and we arranged to meet before he headed out for a Boxing Day blast down to his sister’s.

Speaking of the elderly eight-valve Ford, 150,000miles marked another full service (£122 including parts, labour and VAT). This basically consisted of 10w/40 engine oil, filer, pollen filter, grease and other top-up fluids.

Christmas night was spent doing some light trace photography, which drew the attention of several passers by and of course, the law. Thankfully, everyone was brimming with seasonal cheer and ultimately, left me, tripod and Samsung mini CSC unmolested.
John has taken the electronic option in case he should run out of grunt many miles from home but has been topping 33mph on the formative, local outings and under his own steam.

Glancing inside the Kevlar shell finished in yellow 2pac and integrated electrics/lighting aside; the layout is reminiscent of Mike Burrow’s iconic Speedy/similarly high end recumbent trikes.  Twist grip shifters command a Rohloff hub transmission and more traditional front mech, double ring set up.

He’s added a bit more cushioning around the headrest and is sticking with the hard shell, all weather cover. Suffice to say, he’s delighted, less so the couple’s cat’s, who are now barred from the workshop!

Elsewhere, rumour has it Lee Cooper is making a return to building under his own name and Heidi, my intern has been working on the social side of Stenning photographic. I have already lined up some interesting photographic projects and working on relocation. A new batch of test kit is also keeping me productive and out of mischief during the corridor between Christmas and New Year.

Contact points are extremely personal, so guaranteed to divide opinion. In terms of damping and control, I’ve always liked Lizard Skins DSP range, although it’s much higher maintenance than corks or similarly traditional coverings. Silicone rubber is beginning to enter the fold.

After six months daily service and despite some tell-tale stretch marks (resultant from minor over-tensioning), the Genetic wrap remains in rude health six months and many mucky miles hence.

Widget components also offer a similar covering, this time with a dimpled texture for improved grip in really wet, slippery conditions. This one costs a few quid more and comes in five colours, complete with expandable wedge plugs.

The naturally sticky texture rules adhesive backings redundant, meaning it’s easily unwound to correct aesthetic imperfection and doesn’t render it bin fodder in the event of cable replacement or handlebar swaps.

Most coverings are pretty generous these days to accommodate broad, oversized drops, so I wasn’t surprised to discover eight inches or so apiece leftover on these curvy Salsa Bell Lap-even with double ups.

Our green was interesting too. Aside from being an obvious choice for the teenage dream, it appears to change colour depending on the light-fluorescent when it’s overcast, less garish in brighter conditions.

Thus far, purchase, comfort and control are living up to the hype and while greater owner involvement is needed to keep it clean, compared with corks and leatherette types it’s not proving highly strung in that respect either.

Right; back to testing-lots of blinkies and commuter combos to put through their paces, some 700x25c tyres and strategies to complete before mid January 2016.             


         

Saturday 19 December 2015

Changing Gear







I’ve just recruited an intern to work on Stenning photographic and we’re also recruiting a design assistant for Seven Day Cyclist (www.sevendaycyclist.co.uk ), which is moving from a downloadable magazine to arguably more accessible web format after Christmas.
December’s frenetic countdown to holiday season requires schematic planning to avoid a lull come January, so while relatively tired, there’s no let up.

Sabre tooth man-flu has also relented sufficiently as to permit clear thought processes and a return to serious testing. However, my susceptibility to chest infections means climbing and similarly strenuous exertion still induces the sort of hacking cough synonymous with long-serving, chain-smoking shipyard welders!

Wilder weather fronts have also prompted my Univega’s swift resurrection, though thankfully the gritting Lorries appear to have gone home. Said Tubby tourer’s more upright stance is hardly aero but widely spaced gears provide ample grunt for winching, bombing and cruising.

Big tyres also permit the odd crafty cut through and provide a magic carpet ride now that pot-hole season is in full-swing. After several weeks traversing, wet, greasy rural backwaters, the otherwise likeable Teflon prep was showing signs of embedded filth, prompting a thorough degreasing and some Fenwick’s Stealth.

Generally speaking, bells on bicycles induce eye-rolling- a well-timed yell consumes no handlebar space, costs nothing and is more effective.

However, Oregon based ORP have combined a genuinely capable three mode 70lumen light and 76/96 decibel horn in one blinkey sized package. I’m a big fan of the cutesy silicone blinkies in blanket narrative. This one is available in seven colours and protects the unit from drop and weather damage.

Diodes, circuitry and lithium polymer cell are neatly sealed in a similarly tough polycarbonate body and tucking the USB port firmly underneath, sandwiched between the bars further minimises the likelihood of dirt and ingress getting a look in. 

Prodding the rear “Whale tail” downwards unleashes a more subtle, though attention grabbing bleep that warns pedestrians, walkers and runners of your advance without driving dogs into a braking frenzy.

Upwards delivers a much louder warning, which has dissuaded a couple of learner motorcyclists from making a risky manoeuvre and some drivers from swinging doors open without looking. The diodes also flash a visual warning and the design’s a marked improvement over other battery systems.

In constant mode, the light is just about good enough for well-lit town work and has saved my bacon a few times-most notably when the Univega’s 800lumen dynamo lamp was slow on powering up. Otherwise, flashing modes are perfect companions to these and other main lighting.

Run times are quoted as 12 and 6 hrs respectively, which will depend upon how often the horn’s engaged but like most lithium ion/polymer fuelled models, seems pretty faithful to those quoted and unaffected by factors such as temperature.          

Debate has always raged as to what constitutes serious cycling with people proving particularly sniffy in the contexts of commuter/utility apparel. While I’m most commonly seen blasting along in technical fabrics, it’s worth remembering typical car journeys are less than two miles. This sort of distance can be ridden at reasonable speed and comfort wearing everyday street clothing-a mindset most apparent in the Netherlands.
Similarly, while my preference in terms of commuter lid errs towards well ventilated, sub 300g models with less aggressive profiles and trail DNA, I’ve been pleasantly surprised by this ABUS Hyban. Tipping the scales at a relatively portly 380g; it sports an ABS hard-shell, which is available in six different colours, shrugs at the inevitable everyday carelessness and has a more flattering feel when riding in civvies.
A few years back, feeble watch battery fuelled single diodes integrated within the thumbwheel closure were the preserve of upper end commuter models. Increased demand and plummeting prices means we’re getting sensible, user friendly LED lights integrated within the shell.
Admittedly, these only constitute tertiary lighting but intelligent positioning means they’re aimed squarely at driver eye-level and visible to around 80 metres-further on clear nights. Though relatively well-ventilated and employing the inlet/exhaust system, I was still surprised by how unobtrusive the Hyban felt-even over distances of 15-20miles at a steady 18mph.
Much further/at faster speeds and the increased weight becomes evident, so not a design lending itself to weekend touring. However, many scoots to the office, visits to friends and similar bike as car journeys are much shorter in any case.
Sturdy shell and surprisingly useful peak come into their own on more adventurous mixed terrain commutes encompassing forests, canal/bridle paths etc, while the former provides useful platform for cameras and lighting. Increasingly, it’s difficult to find bad products per se and these must be evaluated according to their intended purpose(s) and comparable designs, not ill-informed preconceptions. 


Tuesday 1 December 2015

Cold Comfort




Wintry, or should I say seasonally appropriate weather has  swept in almost overnight, so I’m extremely grateful for another batch of climate cheating kit and some more lighting arriving at my door. However, even this did not prevent me contracting a nasty dose of sabre-tooth man-flu.

Until then, thermal training jackets (Especially those bearing the “windstopper” tag) had left me feeling decidedly boiled in the bag given twenty miles at club typical speed. However, said chill beating prowess is a godsend with the mercury barely entering single figures.   

Snowfall in the midlands and elsewhere brought the gritting Lorries out in force and I was surprised by just how quickly my Ilpompino’s transmission was turning into a gloopy, grinding paste-even with a stout, though clean running Teflon fortified prep gracing those stainless steel links. Time for a full-blown exorcism.

This also presented the opportunity to fit a Bontrager rack and Zefal Iron Pack XL. The former is very intelligently designed, primarily for commuting and light touring. Better still, a wealth of similarly well engineered adaptors means it neatly accommodates unusual configurations-including frames without eyelets.

That said; carbon ends are a no-no and it’s a very precise fit, so take the time to measure, check before finally nipping everything tight and pruning arms with a junior hacksaw. Oh and make sure the blade is razor sharp, mine wasn’t leading to a slightly jagged cut that needed filing. Hardly a big deal but extra-faff nonetheless. 

I have also discovered said bike’s Thudbuster seat post can present problems when fitting wedge packs. Often, the Velcro straps aren’t long enough, which ultimately results in premature fatigue. The Zefal is a cavernous and neatly segregated model combining old school reliability and modern design.

Externally it’s made from a rugged 820 denier water repellent fabric with plenty of Scotchlite, weatherproof zips-easily operated in gloved hands. Two litre internal capacity equates to two tubes, two multi tools, tyre levers, patch kit, CO2 cartridges;3 tyre levers, AAA batteries and small bunch of keys.

An EVA foam lining supposedly protects valuables from low level vibration while rigid composites maintain shape. Plenty of long, steady miles in the wet and a hosepipe test should reveal its true potential and maybe a limitation or two.   
Back to the deep clean…

Now, I really appreciate the clip on convenience of chain baths but there’s a lot to be said for the old school brush on technique. 

Simply cut the top from a redundant trade bottle, pour in your favourite ant-lube and dawb on with a cheap, clean brush.  Fenwick’s concentrate worked into the links, hub and sprockets and residual salt dismissed with cold water, I engulfed the bike under a sudsy blanket and went in search of bucket, sponge and hot water. 

Fifteen minutes hence-sparking bike and chain dressed in Fenwick’s Stealth. This lube is one of those super high-tech formulas that needs careful application and ideally, overnight curing but dries to an almost invisible state and stays put. 

Plenty of other lubricants will also shrug at winters’ toxic sludge. In a pinch, that capful of 10w40 or more basic semi synthetics such as 5w30 is seriously long-lasting though remember to wipe the side-plates, rings and derailleur cages weekly to avoid grit and grime doing their worst.

Sophisticated fully synthetic motor oils often contain detergents, which keep contemporary engines ultra clean and are reconstituted within the oil pump. Applied to chains, a few hours hence and those detergents will strip all the lubrication…Everyone has a very different opinion when it comes to winter/workhorses and I’m a subscriber to single ring simplicity.

Note, I didn’t say single-speed. I like fixed for countless reasons but a cross derivative running a 1x8/9/10, or even 11spd cassette has to be an extremely practical option. Lively ride, ample clearance for stout rubber and full length mudguards, two sets of bottle bosses and a more upright configuration also helps.

No front derailleur faff, a sensible spaced block means you can climb, cruise and canter in good proportion. Tiagra grade consumables are plentiful and cheap, so no excuses for running everything into the ground-they don’t look low rent either…

Elsewhere, I’m about to recruit a social media person for “Seven Day Cyclist” and my photographic venture. We’re also bringing another designer on board, having concluded a web based (rather than downloadable mag) format is the preferred layout.

This has also coincided with a fresh temp gig to balance the books and my KA sailed through its MOT inspection with no remedial work required. Impressive for a 13 year old “super-mini” with 148, 250 on its odometer.     









Saturday 14 November 2015

Festival of light








So long as bike(s) and rider are properly dressed, weather presents no barrier to serious fun. Autumn has swept in stealthily, its slimy cocktail replacing the rich vibrant auburn colours. Thankfully, it was accompanied by Diwali and a steady trickle of kit designed for this much maligned cluster of months. Talking of which, that sorry looking Specialized Rock Hopper has just been transformed-cream powder coat with fresh decals sealed under 2pac lacquer.

I’ve got a thing for blinkies ever since I acquired my first back in November 1992.
Plug in Integral lithium ion/polymer cells are almost default and while undeniably convenient, not to mention frugal compared with cost of running AA/A, they aren’t perfect for all occasions.

AA/A types remain better options for touring, dusk ‘till dawn night rides and those who don’t clock in at a keyboard. Run times can be 30-60hrs plus in flashing, Ni-Cd rechargeables keep costs to a minimum and disposables are pretty ubiquitous-off-licences, supermarkets, petrol stations usually keep healthy stocks.  This I Zone Curve 2 rear light is a particularly nice, inexpensive example.

Firepower has always been a popular selling point but rather like our humble bar mounted computers, our blinkies are positively bristling with different modes-some retina tickling, others that sip reserves, sequences designed to solicit attention in different contexts the list continues. Lowest common denominator, we only need two modes-steady and flashing and our bikes, a single, fixed gear of 72inches...        

COB (Chips on Board) technology, which enables colonies of tiny diodes to occupy the same space seem quite popular this season. Theoretically this combines optimal output, while preventing diodes and circuitry overheating so they can fulfil their true potential and reach ripe old ages.

High power headlamps are another justly popular choice for navigating dark roads and another technology I embraced with both arms back in the late 1990s. Back then, we were talking in terms of £200 10 and 25 watts and lead acid batteries that induced hernias.

Smart used to offer some nice cheap n’ cheerful versions for commuting- I had the cute-looking twin lamp complete with slightly whippy bracket and a CNC machined 10 watt flood version, which was surprisingly bright but not obviously, not particularly helpful for picking out the detail.

Competition and economies of scale have seen prices crash and with box fresh 1800 lumen grey (unofficial) imports offered on auction sites for as little as £18, its easy to see why they’ve become default, even for road riding.  

However, aside from the potential risks-lower quality chargers and exploding cells being popular discussions on forums; these are often limited to three modes. Full blast; standard (50/60%) both of which is way too much fire power for built up districts.

Better (read more expensive) models allow more progressive stair casing, so you can charge along abandoned backwaters at full pelt but click down to something suitable for city limits when required.

Battery slurpage is slower, so you can play out longer and oncoming traffic doesn’t get dazzled. Something like this Oxford X pro is another option for town and suburban runs, either on its own or as a tempered side-kick to your big gun.

Nicely made from rugged CNC machined aluminium, it’s another “lolly stick” plug in model that fuels up from your USB, or mains adaptor. Top whack is reputedly 300lumens but the lens casts a very pure, focused pool of light, which has coped surprisingly well in short haul semi-rural contexts to around 17mph.

Prodding down for economy is easily achieved, even in gloved hands courtesy of a positive centre-mounted switch but there’s no danger of the dreaded dazzle and other traffic still takes notice at around 200 metres.

Flashing is the lowest setting and if you were purely looking to remain conspicuous, 300-400metres isn’t unrealistic and the centre window allows decent peripheral bleed too, so you should remain firmly on the radar when entering the flow of traffic.       

Short days with low light have been presenting some photographic challenges but considerably more rewarding than the calibre of temporary work being offered. Unfortunately, this is going to remain part of my economic diet while I nurture sapling projects, build brand presence and purchase more equipment.

Several agencies have been in touch, some interested in my journalism specific skill-set, others looking to fill housing roles. Pragmatism is a basic pre-requisite for freelancers and indeed, people generally in a volatile economy.

Therefore biting the hand that offers potential work, let alone feeds you is always foolhardy. Recruitment is sales driven and experience enables one to see through the patter. No shortage of people complimenting me on my versatility but with notable exceptions, this hasn’t been reflected in the assignments offered.


Thankfully the standard of applicants for Seven Day Cyclist has been refreshingly high, although we’re whittling them down to a handful and will interview at our earliest convenience. 

Thursday 5 November 2015

It Shouldn't Happen To A Photographer

 
“Riiiiip; Oh-no!” isn’t the most auspicious starts to a wedding, even if it strikes within the privacy of a bathroom. Mercifully, my salwar Kameez (Indian suit) trousers had only succumbed to a very slight and unrevealing tear, which was easily hidden (along with my blushes) by the long flowing gown.

No further wardrobe; or photographic malfunction struck during the four days of celebration and I virtually filled a16gb card to capacity.  The bride graciously agreed to some candid shots being posted here and on my photographic site. www.stenningphotographic.com

October 25th also signalled the end of British Summer Time (BST) and being something of a night owl, I was delighted by an abundance of blinkies/related equipment sent for my testing pleasure from various editors and distributors.

Courier was very quick to compliment me on the weatherproof canvas commission and unusually, keen to talk cameras. He seemed to have a genuine appreciation of their mechanics too; which is heartening given widespread perception that photography is merely a question of pointing and shooting.

“What camera is that? Takes good photos mate!” Hmm, nothing to do with understanding of light, control of aperture, ISO and shutter speed, or the ability to spot a pivotal moment/ expression then... 

The Teenage Dream is one of those framesets typical of small scale builders during the early 1990s. I am of course referring to the practice of adding eyeletted dropouts-without altering geometry one iota. This permitted the same frames to be marketed as winter/trainers.

Consumer appeal was obvious too-a really spirited frame that would induce massive ear to ear grins, while still managing mudguards and 23-25mm section rubber… Aside from the legendary Salmon Profile models, persuading the narrowest of full length chrome plastics to fit without binding required patience and considerable ingenuity

Thankfully its lowlier cro-moly sibling (built the following year from a hotch potch of components swapped or salvaged from a recently deceased fixed gear conversion) was more accommodating...
Fast forward 23 years and these arrived from Widget. Being able to slide the front through said bike’s aero fork crown and tight rear triangle while still maintaining enough gap for 25mm tyres induce a state of delirium.
That said; fitment still demanded painstaking precision and minute adjustment. Pruning the stays by matter of millimetres at each point was the only means of maintaining this delicate equilibrium.

We are firmly in fag paper territory with these 185tpi, 25mm Vee Rubber Rain Rubber. Operating pressures range between 100 and 145psi, so despite having a midi pump capable of delivering a genuine 100psi plus, I won’t be popping out without a Co2 inflator nestling in my back pocket.  These also fought back, registering a cool six on the struggle-o-meter.

Cajoling them aboard a very unremarkable set of MA2 hoops required the combined forces of three composite levers and dexterous digits. These were accompanied by the sort of primal grunting and panting more commonly associated with the final stages of labour.

My workshop tyre wand would’ve been the speediest solution but evaluating ease of re/mounting using standard fare was crucial given we’re most likely to flat by the roadside, miles from said labour saving gizmo. Initial impressions are of an extremely quick, supple tyre with leach like cornering prowess and  

Halloween probably wasn’t the best time to commence fettling and the spirits certainly seemed to be conspiring against me. First the Teenage Dream’s rear dual pivot calliper got the sulks; prompting a thorough strip, clean and refit. Next up, cable replacement. Having spliced a decent quality mid-range Jagwire housing to length, to my horror I’d run out of equivalent inners. 

Budget inner wires tend to be very serviceable, although have a tendency to stretch, hence I leave a couple of hours, overnight where possible before pulling through and finally guillotining with razor sharp snips. Alas, malevolent spirits intervened again and as I squeezed the Jagwire cutters decisively, those budget Bowden erupted ruinously-both times.

Not to be outdone, my Hudl2 tablet computer suddenly succumbed to charging failure-something supposedly linked to the recent software updates. In practical terms, this means ringing their customer helpline and hoping it can be rectified before the warrantee elapses in a few days…

Feeling decidedly jinxed, I cut my losses, popped the bike back on its hook, ordered some mid-range inners and fresh bar wrap. Felt the urge for a bargain basement rummage-some Bike Ribbon with a slightly unusual colour scheme. Nothing fired my imagination, so I settled on this wallet-friendly black Deda and decided I’d upgrade the venerable Cane Creek SC5 levers in favour of some Shimano 600 since opportunity presented.

Aside from a lighter action, their slender profiles are arguably more in keeping with the bike’s early 90’s flavour.  Well, with the Cinelli mini tri bars dressed in recycled Ritchey, time I was shortlisting some people.