On this basis I’ve decided to switch the Ikon back to the Sputnik/XT wheel and pop the Smart Sam on the Ryde/Halo Spin Doctor. Famous last words, the existing KMC chain is faring well. Plan is to run it for another 800miles (c. November) and then, assuming it's worn significantly, switch to one of the pe-cut 106 link replacements. For the meantime, lube-wise I’m staying with the Momum MIC Wax Momum MIC Wax Lube | cycling-not-racing (sevendaycyclist.com) since its clean and easy to top up, as necessary. Aside from being lighter, rigid forks have some definite benefits in winter. Zero maintenance, save for washing and periodic inspection.
Then of course, here in the UK, ground tends to be softer, so boing is less crucial, and I personally prefer the handling in these contexts. I went for the cantilever and disc mount version of the Carbon Cycles eXotic Fork with Disc and V Brake mounts Carbon Cycles Exotic Fork | cycling-not-racing (sevendaycyclist.com) on the grounds of versatility- I could switch to a cantilever stopper, if necessary but admit its disc only sibling is a sleeker choice. It also has other advantages when it comes to front mudguards.
I had to modify the Mud Hugger Evo slightly to achieve a good fit. Cracking front guard (fender) incidentally. I also recognise that suspension technology has come along leaps and bounds since a set of Rock Shox Indy SL. Another lightweight and uncomplicated design that I raced with some twenty-three years back.
Mine used the Eglund air cartridges which were a marked improvement on the OEM elastomers. They couldn’t be locked out, in the literal sense but near as damnit with the shock pump. Lock-out functions mean a bouncy fork can behave like a rigid fork without needing to switch and they’re a serious boon for more technical trails. Horses for courses.
Lighting has also evolved and arguably more dramatically. However, when it comes to longer trail outings, I’ll still reach for a more traditional master blaster. The Sigma Buster HL2000 SIGMA SPORT BUSTER HL 2000 | cycling-not-racing (sevendaycyclist.com) has been around for some time now but in my book, still is truly relevant, especially given the 1300lumen mode is good for 5 hours riding. I’ve switched mine to the Lazer Chameleon Helmet in preparation but for the time being, am putting the Ravemen PR2000 through its paces.
Thankfully, the weather’s still very balmy, so the Holdsworth and I have been enjoying some early morning blasts- I'd regret not taking this opportunity come November. Interestingly, the LR and PR series use the same mount, meaning it's easily ported between bikes- the Holdsworth and fixed gear winter trainer to suit. As a rough and ready guide, the LR series is optimal for road-biased duties, the PR for those who lean more toward the trail.
The Holdsworth’s seat stay is also sporting the Infini Sword, which has impressed me with its frugality. The pulsing and flashing modes are surprisingly bright and peripheral presence is better than I was expecting and when compared with otherwise likeable Oxford Ultratorch R50 Slimline Rear Light TEST & REVIEW: OXFORD ULTRATORCH R50 SLIMLINE REAR LIGHT (sevendaycyclist.com)
Funny how things turn up when you’re not hunting them. My Park SPA2-C pin tool rematerialized, so I switched the Fixed Gear Winter/Trainer’s bog-standard crank bolts over to self-extractors. I also checked I still had a couple of 68x107 cartridge bottom brackets in stock, which I did. I tend to get around 8-9,000 miles from the UN55, 6,000 from patterns.
The Holdsworth is still running an ACOR unit and doesn’t do big miles, so I’m not expecting that to get the grumbles. However, they’re another part that trundles on faithfully and without complaint, then expires without notice. That said; I’d probably treat the Holdsworth to something more exotic, dare I say slightly lighter. On that note, I'll leave you with my review of the Carbon Cycles eXotic Carbon Titanium Seatpost Carbon Cycles eXotic Carbon Ti Sea | cycling-not-racing (sevendaycyclist.com)
