Reflections in The Rain

So, the Holdsworth’s returned hibernation due to torrential rains and semi-flooded roads. Gives me chance to acquire a replacement Apeman housing. Talking bars, I reached my verdict on the Velo Orange Handlebar Accessory Mount. https://www.sevendaycyclist.com/velo-orange-handlebar-accessory-mou  

Defaulted to my fixed gear winter/trainer, early season training kit, and wet lube. Mildly temperamental cleat engagement promoted some introspection, and ultimately replacement of the left. I’d had a part-worn spare (in much better shape) bouncing around a small parts tin. Bolted in situ, harmony restored.

Patterns are generally very accurate. Some will argue this is because many are made in the same factories, and simply re-branded. Maybe so. However, having mixed n’ matched VP, Wellgo, XTC, Exustar, (and pretty much every SPD pattern I could get my feet in, these past 25 years) I’ve concluded Shimano cleats are machined to marginally tighter tolerances.

Placed aside each other, these ISSI cleats have a ledge, whereas the Shimano are flat. Interestingly, the Shimano engage and release faster than the dedicated ISSI (which, in fairness, work harmoniously with the brands discussed).

As with cameras, there’s a sound economic, and practical argument for running one, or two systems. I ran Look on my road bikes, SPD on my mtbs for several years (rather like running wet lubes during winter, dry during summer).

However, the latter system’s convenience- the ability to walk, rather than hobble (and gouging expensive flooring) through the house, or when navigating slippery surfaces etc, saw their wholesale adoption. Holdsworth & Teenage Dream, run Time, SPD for Univega and of course, fixed gear winter/trainer.

I prefer dual sided systems, especially riding fixed, since you can simply clip in, and power away. However, some single-sided designs, including these Wellgo are weighted, which means the pedal “presents” the cleat mechanism, so less faff.

This; coupled with their smaller surface area has proven a winning combo on my tubby tourer.  I’ve also run a set of Time All Road Gripper Pedals, to good effect. They were a hybrid design- cleat mechanism one side, rubberised platform, on the other.

They’ve been gone from the French marque’s range for several years, and pricey for working bikes, relative to dual sided SPD patterns. 

My only minor gripe, with Time’s otherwise brilliant ATAC, is the use of brass cleats. The softer metal wears faster, and replacements are expensive, relative to the ubiquitous SPD.      

Stating the obvious perhaps, but this soggy spell has been perfect, for testing wet lubes (although I also like putting dry formulas against the elements. If only to see how they’ll cope when an arid ride turns unexpectedly soggy). 

Talking of which, despite looking slightly thirsty, touching my fixed’s chain revealed a stoical black, lubricant layer. I’ve since cruised past the 300-mile mark, before this became a faint, filmy state. 

So, since I was adjusting the chain tension… Out came the Zefal Pro Dry Chain Lube. An odd choice some would argue. Afterall, these are specifically designed for tinderbox dry conditions.

However, the UK is, apparently on the cusp of high pressure and blue skies. Is the Pro Dry going to be of the old school, i.e. washed away come the first hint of drizzle? Only real-world miles will tell.  

Several months in, I’m pleased to report that the Velo21 Ultimate Paintwork Protection https://www.sevendaycyclist.com/velo-21 has lived up to its hype. In a nutshell, its compatible with matt, satin and gloss finishes, a little goes a long way, and results are lasting.

Punctures, Potions & Preparation

Halloween’s arrival coincided with wetter and classically autumnal conditions. I had a premonition I’d succumb to a flat, an evening or so previously, fuelled by the torrential downpour. Thankfully I’d donned my Lake booties, and done an inventory of the wedge pack. https://www.facebook.com/Sevendaycyclistmagazine/videos/564575290635001/

Spare tubes, tyre levers, 15mm wrench pump all present and in good order. The familiar, wet “hiss fut, hiss fut, fut” and gradual loss of pressure, struck seven miles from base. Having whipped out the rear wheel, I was conscious of a familiar, guttural rumble. No, not my bowels- a V8 engine.

Seconds later, an ambulance cruised to a halt and a Paramedic leaned out from the cab. We exchanged the time of day and, he seemed slightly surprised, by my mid puncture buoyancy. We laughed, bid each other good days. Whatever pierced the Soma Fabrications Supple Vitesse EX https://www.sevendaycyclist.com/soma-fabrications-vitesse  casing had been flushed out-possibly by the air pressure escaping the butyl it bit.  

At least this struck during a gloomy morning, not the dead of night. These contexts proved an ideal test of the Ugoe 2000 lumen headlight’s flashing-as a daylight mode. At the other end of the power spectrum, I’d also reached my verdicts, regarding the Oxford Ultratorch Slimline R100 and R50 lights. https://www.sevendaycyclist.com/oxford-ultratorch-1 These have impressed me, in pretty much every respect. Especially, their performance, relative to asking price. https://www.sevendaycyclist.com/oxford-ultratorch

Spare instated, I then discovered my CO2 cylinder had mysteriously discharged. (This has since been substituted for old faithful, my SKS Air Champ Pro. A big old beast but ultra-dependable).

Out with the mini pump. Two minutes later, I guesstimated 65 psi (the Supple Vitesse EX, recommended minimum), reinstated the wheel, centralising it and adjusting chain tension. Track nuts snugged down, I scooted off, quietly petitioning the god of blowouts, to be merciful.  

Now, in my last entry, I started a 5w/40 motor oil challenge. This was partly to indulge my curiosity and to see just how any miles per application (and theoretically, how cheap) it returns, compared with bike-specific wet lube. Chainsaw oil is the other choice, many swear by. It also forms the basis of Nasty Lube Siberian chain lube https://www.sevendaycyclist.com/nasty-lube-siberian-chain-lube   

My Univega was the first recipient but it wasn’t long before my fixed’s KMC X1 followed suit. Motor oil transfers to hands (and pretty much everything else!) quite readily, why this roadside flat was a bit messier than usual. This eventually leads to an indelible, some might say, authentic patina on clothing.

I’m a firm believer in the old saying, that there’s no such thing as the wrong weather, just the wrong kit. However, for the right kit to look after you, it also needs a bit of TLC. Two and three-layer laminates, such as Gore-Tex, eVent and more sophisticated polyester mixes all benefit from periodic treatments.

Soap Flakes is probably the kindest, everyday detergent However, proofing agents, such as this Nikwax Tech Wash, retain and restore the weather repelling, breathable properties.

Genuine leather shoes, gloves, saddles, bar wrap etc also need treating with a decent quality “hide food”. This locks the elements out, which keep them supple and nourished. Much as with motorcycle leathers, apply the food every six weeks, or so. Not too regularly though, since the solvent based blends will rot stitching.

Overshoes are a sensible option during the wetter months, protecting expensive footwear from salty, slushy stuff and rider from chill. Steve (Seven Day Cyclist’s Co-editor) likes them. I prefer the comfort and convenience of booties. For me, frequently rinsing salty spatter and similar contaminant, is a minor trade off.