Spaced Out & Salvaged

Inspired by warmer drier weather, and of course, that Holdsworth Cyclone awaiting refinishing, I’ve plucked my Holdsworth from hibernation and decided to revise the cockpit, again. My love of flared drops seems to know no bounds. This might offend traditionalists, but my bikes are built, and evolve to suit me.

That’s not to say I don’t appreciate some people’s desires to keep a classic bike’s authenticity-right down to fasteners. The Soma Highway1 https://www.sevendaycyclist.com/soma-highway-1-handlebars are a fine set of shallow drops, but that oh-so familiar urge for tweaking was calling. Condor’s hybrid design, combining riser and drops https://www.sevendaycyclist.com/soma  wasn’t the most obvious choice, I’ll admit.

After some reflection, I opted for the MK1, and then decided I also fancied a change of brake lever. A quick rummage in the spares’ drawer, unearthed this solitary, orphaned Tektro R200. Seemingly superseded by the RL340, these are nicely finished Campagnolo patterns, right down to the push button Q/R.

Giving change from £25 (pr) they play nicely with dual pivots, centre pulls and cantilevers. Their RL520 cousins were designed for V brakes and compatible with, cable operated disc callipers, such as these Tektro Spyre. Light springs, decent modulation and feel.

Some folks might be a bit snooty, but both represent fantastic value for money. Oh, and if you’re really that fussed about branding,, the Tektro logo could be stripped, using a cutting compound, such as Crankalicious Mayo Jaune Intensive Frame Cleaner https://www.sevendaycyclist.com/crankalicious-mayo-jaune-intensive-  

At 145g, the solitary lever is 85g heavier than the Acor carbon TT lever, it replaces. However, I felt it a more suitable revision-knew it’d come in handy someday! I described the Soma Condor2 Shallow Drop Bars https://www.sevendaycyclist.com/soma-condor-2-shallow-drop-bars  as   “The bar the original Soma Condor Handlebar should’ve been”.

Generally, I stand by this statement, but the original’s lower slung tops, are a better fit with the Holdsworth. Being able to salvage the silicone handlebar tape, was another definite bonus.  In some respects, The Genetic D-Riser 16 Bars https://www.sevendaycyclist.com/genetic-d-riser-bars  might’ve been better still. However, they’re staying on my fixed gear winter/trainer, thank you.

Holdsworth makeover complete, I tweaked the Woodman Saturn Aheadset bearings, gave it a good sudsy bucket wash, then treated it to this Velo21 Blueberry Glaze wax. Despite some initial scepticism, performance and longevity are quite impressive. Aside from apparent quality, and longevity of sheen, its genuinely compatible with matt, satin and gloss finishes. Yes, including this Torus Titanium Stem https://www.sevendaycyclist.com/torus-titanium-stem

Talking of wax, I had intended to dress the chain in Zefal Pro Dry Chain Lube but picked up Zefal Extra Dry Chain Wax, by mistake. An error that only became apparent when the white emulsion began seeping into the links. Mildly annoying, but there we are. No sense starting again, so I delivered three coats and popped the bike away. Quitting while ahead is a definite virtue.  Talking of chains, I checked the Univega’s FSA using my KMC digital unit. To date, wear is nominal, but I acquired a KMC X973 grey replacement, for when the FSA needs pensioning off.  

Fixed chains don’t require the same degree of introspection, but you’d be foolish not to inspect and where appropriate, adjust tension. This was only necessary a couple of times, during the KMC Z1 X’s  lifetime. https://www.sevendaycyclist.com/kmc-inox-chain  By comparison, this is the third time in 1100miles, for the Passport Elements Single Speed Anti Rust Chain https://www.sevendaycyclist.com/passport-elements-single-speed-chai .

Nonetheless, the Passport is a very reliable, relatively smooth and highly corrosion resistant option. The galvanised texture genuinely seems to retain lube better, than traditional polished/electroplated models.

While it copes well with the stresses of a fixed transmission, I’d opt for a heavy-duty track version, if like me, you only run a single, front brake. Perfect for a single speed, or hub geared bike, especially those that see year- round, four seasons; service.     

The (positive) Remains Of The Day

Delighted to report seasonally inclement weather has permitted extensive testing of those Schwalbe winter tyres. Tipping the scales at 998g apiece, 50epi (ends per inch) casings, Kevlar belts, tungsten carbide spikes and maximum operating pressure of 70psi denote ones designed to cope competently with the slippery season. Schwalbe recommend running them in for forty kilometres on metalled road before those studs bite predictably and I noticed some very minor cornering squirm on our maiden voyages but nowhere near change of shorts territory.

Having done so, traction on most surfaces is superb, although in common with similar designs, ice and shallow snow requires a steady, consistent riding style. More spirited acceleration; say at roundabouts and junctions can induce pregnant pauses before the spikes catch up but this wasn’t an issue at a steady 17mph along winding rural backwaters.

Once accustomed to their gravelly serenade, I rather enjoyed the training benefits of increased resistance and the smugness of knowing that stretches of iced dung were unlikely to see us clattering across the rutted carriageway in an undignified heap. Provocative over inflation and long, greasy descents couldn’t cajole shimmy or similar bad manners either, even with trailer en tow. Aramid has long been the standard by which puncture repelling casings are judged but the chevron pattern tread expels glass, flints and similarly evil debris with remarkable aplomb while Kevlar belts provide further peace of mind.

Studs wear much faster (especially in regions where snow is an occasional winter visitor) but with negligible effect, tempered by the availability of aftermarket replacements and seasonal use. At seventy odd quid, it’s tempting to suggest they’re an indulgence but means I have the option of heading out in otherwise unfavourable conditions after a hard day’s typing or temping without doing myself and/or machine a mischief. 

Continuing this theme, having heard of my recently demised levers, Paul Winn at Weldtite www.weldtite.co.uk was kind enough to send me two sets of these banana- shaped Cyclo Ezytech. Sharing striking similarity with Pedro’s, they’re made from a lightweight and supposedly super durable polymer.

Broader profiles and more aggressive scoops suggest they’re dependably tenacious with tight beads but I’m going to push the boat out and invest in the British marque’s laughably understated workshop tyre removal and fitting tool and chain rivet extractor for home duties. That said; both cool tool and Specialized EMT are still doing surprisingly well (I nearly said sterling job but that’s inappropriate given the nation’s recent credit downgrade).

    

Ever since spotting a child’s home brewed ‘cross build based around a scrap HLE Peugeot frame that had been chopped, MIG welded together and dressed in leftover paint and parts, I have wanted to create something similar for Joshua. From a purely economic standpoint, the amount of labour involved in sourcing, cutting and fusing such a Franken bike far outstrips its worth. Timely then that Frog bikes have sent me their model 62, a lightweight kids bike tipping the scales at just under ten kilos.

A TIG welded 6061 aluminium chassis (designed for 62cm inside leg), steel fork and 24-inch wheels mean it’s not only light but versatile too thanks to generous frame clearances. OEMs are 1.75 but there’s ample clearance for 1.9 knobblies and trail riding courtesy of a surprisingly lofty bottom bracket. Components are proportionally sized, addressing maters of reach, comfort and control. Transmission wise, a single ring, seven-speed twist grip system offers a decent spread of ratios without being unnecessarily complicated or hefty. However, Joshua will have the casting vote in a few weeks.

Taking an inspirational wander round the web in search of people’s bare bones budget bike builds I happened upon a blog called “Lovely Bicycle” written from a uniquely feminine perspective by a freelance consultant, designer and photographer, who embraces everything from frame building and classic roadsters to dressing beyond Lycra without being biased in any particular direction. I also admire creativity skill and entrepreneurial spirit. Something in plentiful supply at Dill Pickle gear owned and run by Emily O’Brien.

Emily is a mile-munching Massachusetts lady who not only loves pickles and Limericks but also makes a beautiful range of saddlebags; U lock totes and even mud flaps- for your fenders, or guards as we say in the UK. Well, until her (luggage) sample arrives, I’m going to upgrade the Univega’s stoppers, draft some more copy, watch a Korean film or two and scour temp land for something suitable.