Showing posts with label Handlebar patterns. Show all posts
Showing posts with label Handlebar patterns. Show all posts

Thursday, 6 June 2019

Spaced Out & Salvaged












Inspired by warmer drier weather, and of course, that Holdsworth Cyclone awaiting refinishing, I’ve plucked my Holdsworth from hibernation and decided to revise the cockpit, again. My love of flared drops seems to know no bounds. This might offend traditionalists, but my bikes are built, and evolve to suit me.
That’s not to say I don’t appreciate some people’s desires to keep a classic bike’s authenticity-right down to fasteners. The Soma Highway1 https://www.sevendaycyclist.com/soma-highway-1-handlebars are a fine set of shallow drops, but that oh-so familiar urge for tweaking was calling. Condor’s hybrid design, combining riser and drops https://www.sevendaycyclist.com/soma  wasn’t the most obvious choice, I’ll admit.
After some reflection, I opted for the MK1, and then decided I also fancied a change of brake lever. A quick rummage in the spares’ drawer, unearthed this solitary, orphaned Tektro R200. Seemingly superseded by the RL340, these are nicely finished Campagnolo patterns, right down to the push button Q/R.
Giving change from £25 (pr) they play nicely with dual pivots, centre pulls and cantilevers. Their RL520 cousins were designed for V brakes and compatible with, cable operated disc callipers, such as these Tektro Spyre. Light springs, decent modulation and feel.
Some folks might be a bit snooty, but both represent fantastic value for money. Oh, and if you’re really that fussed about branding,, the Tektro logo could be stripped, using a cutting compound, such as Crankalicious Mayo Jaune Intensive Frame Cleaner https://www.sevendaycyclist.com/crankalicious-mayo-jaune-intensive-  
At 145g, the solitary lever is 85g heavier than the Acor carbon TT lever, it replaces. However, I felt it a more suitable revision-knew it’d come in handy someday! I described the Soma Condor2 Shallow Drop Bars https://www.sevendaycyclist.com/soma-condor-2-shallow-drop-bars  as   “The bar the original Soma Condor Handlebar should’ve been”.
Generally, I stand by this statement, but the original’s lower slung tops, are a better fit with the Holdsworth. Being able to salvage the silicone handlebar tape, was another definite bonus.  In some respects, The Genetic D-Riser 16 Bars https://www.sevendaycyclist.com/genetic-d-riser-bars  might’ve been better still. However, they’re staying on my fixed gear winter/trainer, thank you.
Holdsworth makeover complete, I tweaked the Woodman Saturn Aheadset bearings, gave it a good sudsy bucket wash, then treated it to this Velo21 Blueberry Glaze wax. Despite some initial scepticism, performance and longevity are quite impressive. Aside from apparent quality, and longevity of sheen, its genuinely compatible with matt, satin and gloss finishes. Yes, including this Torus Titanium Stem https://www.sevendaycyclist.com/torus-titanium-stem
Talking of wax, I had intended to dress the chain in Zefal Pro Dry Chain Lube but picked up Zefal Extra Dry Chain Wax, by mistake. An error that only became apparent when the white emulsion began seeping into the links. Mildly annoying, but there we are. No sense starting again, so I delivered three coats and popped the bike away. Quitting while ahead is a definite virtue.  Talking of chains, I checked the Univega’s FSA using my KMC digital unit. To date, wear is nominal, but I acquired a KMC X973 grey replacement, for when the FSA needs pensioning off.  
Fixed chains don’t require the same degree of introspection, but you’d be foolish not to inspect and where appropriate, adjust tension. This was only necessary a couple of times, during the KMC Z1 X’s  lifetime. https://www.sevendaycyclist.com/kmc-inox-chain  By comparison, this is the third time in 1100miles, for the Passport Elements Single Speed Anti Rust Chain https://www.sevendaycyclist.com/passport-elements-single-speed-chai .
Nonetheless, the Passport is a very reliable, relatively smooth and highly corrosion resistant option. The galvanised texture genuinely seems to retain lube better, than traditional polished/electroplated models.
While it copes well with the stresses of a fixed transmission, I’d opt for a heavy-duty track version, if like me, you only run a single, front brake. Perfect for a single speed, or hub geared bike, especially those that see year- round, four seasons; service.