Bringing It All Together

Progress has been somewhat disappointing over the past week or so, thanks largely to the wrong diameter stem. However, it’s served as a useful template for cutting the steerer. Some advocate ruthlessness but I didn’t want to be committed to an uncompromisingly low position, choosing in favour of some additional length and employing spacers to close the gap. Interestingly, I have learned the original, threaded fork was paired with a Campagnolo mirage headset-useful to know but I’ve also discovered the shallow steerer placed additional strain upon the headset cups, resulting in their untimely ruin.

I now have a choice of Nitto Bull horns, or longer pursuit style bars. One is reliant on me finding the illusive silver anodised, lazer etched Nitto stem or going the pursuit bar route and buying a new stem-deviating from the use what-you-got script a little but needs must when the devil rides. Either configuration will shave a further few grams, continues the minimalist theme while still providing the ideal platform for Tri Bars or Spinacchi extensions should the lure of ten mile TTs come calling. Sticking with the broad WTB drops would be the beginnings of a slippery slope likely to result in a build mimicking my Ilpompino.

Once this cockpit dilemma’s sorted, it’s a question of rounding up the remaining components and acquiring a suitable short reach dual pivot calliper. I don’t want to be laying out a bundle here so the smart money’s on a Tektro. Not being a nostalgia stalwart, a Specialized Toupe’ gel with titanium rails provides a superbly comfortable perch and is considerably lighter than the Brooks B17 I’d initially earmarked. From there it’s just a question of bolting the Stronglight cranks onto their tapers, threading in some shop brand SPDs, wiring up the front brake, slipping on some bar tape and waiting for the wheels to arrive. I am the sort of rider that goes for years without a puncture and then plagued by a succession on one single outing. A jaunt to the seaside aboad the Univega last Saturday being a prime example. The first I put down to fluke and a shard of glass penetrating the tyre’s Kevlar belt but unfortunately a further round of deflation instigated more intimate examination.

To my horror, I discovered the otherwise healthy looking Araya rim was splitting at the join. Knowing I had a perfectly good wheel, complete with dynohub languishing in storage and faced with two burst tubes, I rode a very choppy fifteen miles home on the flat tyre. Still, 12000 miles is pretty good going from an inexpensive rim and it soldiered on when I needed it most. This also presents the ideal opportunity for me to utilise the Basta lamp that landed in my lap a few weeks back…

Leading From The Front

Equipped with carbon fork and super-smooth needle roller bearing Aheadset with aluminium cups that wouldn’t look out of place on an XC mountain bike, it was a quick forty- minute drive to Justin Burls’ workshop. The warm spring day encouraged further unexpected belching of Waxoyl from the Holdsworth’s bottom bracket shell but mercifully I had lined the Ka’s footwell with cardboard-thus defending the interior from the muddy brown discharge. After ten minutes marvelling at the size and refinement of the headset, Justin worked his magic with the headset press, installing the cups and fork crown with consummate ease. Forgetting to bring the Aheadstem means I will need to pop the bike into the work stand and cut the steerer to the desired length myself. Still, this a comparatively straightforward task and I will err on the side of caution, cutting less rather than more and filling the gap with spacers.

The new fork means I can take advantage of a modern shallow reach dual pivot brake calliper and 700C wheels. Mercifully the Woodman doesn’t employ the irksome star fangled nut but an interesting bung-type assembly. If I’m not totally happy with this, I will opt for a headlock bolt- ideal for carbon steerers, heavier and/or more aggressive riders.

Being as it was still early afternoon, we took the opportunity to go for a blast in the spring sunshine- I aboard his Russian TI fixer and he aboard “Old Faithful”. After some brief pre-ride preparation- the inflation of tyres and in his case, the taming of a rogue mudguard (fender) bolt, leading him to reflect upon a rebuild after 20,000 winter miles. Five minutes later, we were blasting through the outskirts of Harwich and into the long and winding rural landscape.

Following as close on Justin’s wheel as my legs and a 67-inch gear would allow, we cantered up the climbs and dived into the descents, the bright, tranquil landscape deceptively still as we battled into an unrelenting headwind. Two thirds of the loop completed, he stopped to tend to a missing mudguard eye bolt whilst I contemplated a loose stem cap. Justin jokingly remarking that old faithful might well explode before we returned to the safety of the workshop!

Mercifully neither men nor machines expired and after resuming civilian dress, it was quick cup of tea and a look at his wife’s new bike. Mila can’t ride a solo so Justin built this delightful frameset out of Columbus tubing he’d had lying around. The fork, also fillet brazed by him is slightly shorter than standard suspension corrected designs. Crank arms need shortening by 20mm to 155mm but he has this all in hand.

The Great Fibre Provider

The past few weeks have been frustratingly slow, although there’ve been some positive developments on the Holdsworth build. The fabled carbon fibre front end has finally emerged. Carbon blades with lawyers lips bonded to a Cro-moly steerer might not be the most exotic combination but the rake should have a positive effect on handling whilst providing a harmonious marriage between classic and contemporary.

Component choice is now much less prescriptive, sure a Cinelli or Nitto quill stem oozes old school charm but an Aheadstem was my weapon of choice and going threadless means I can ditch the quill adaptor, gain a stiffer cockpit and shed a few grams into the bargain. An alloy, CNC machined Woodman with needle roller bearings takes care of steering and Justin Burls has kindly offered his services seeing as my tools are on loan.

Bike builds, like racing are often metaphors for life- not everything can be done by the book and I secretly enjoy offending the dogmatism of the purists, the neurosis of the weight weenies and the hipster's clique ridden, pseudo intellectual chic. Sure, it’s nice to have a faithful period build, some weight savings will undoubtedly make you go faster and Lime Green Velocity’s may get you laid but neither I, nor my bikes are so conveniently categorised.

Elsewhere, the teenage dream, my classic road frame is getting a makeover. Receding enamel of the “lick and a promise” school of frame finishing forced my hand. Sharon loves the retro British Racing Green livery so it’s been entrusted in the care of Trevor and sons at Maldon Shot Blasting & Powder Coating for a blast clean and 6010-powder finish.FAG sealed units seemed like a great idea twenty years back but this is being replaced by a much stiffer ISIS configuration. Sans tool, I resorted to knocking the taper through using a two- pound mallet before judicious cup removal with a hammer and drift. However, being plastic eliminated potential damage to frame threads.

Forking Hell!

"Credit crunch" is by far the most overused expression of the moment but with the sudden evaporation of my temp job (Pivotal for cash flow) sinking its incisors into my Lycra and money stretching as far as size eight knicker elastic, we certainly live in interesting times. Adapt and survive is a prudent philosophy and more of us will return to barter-skills as opposed to money being traded-I’ll undertake your photographic requirements if you refinish my frame/ car panel/wall or whatever the arrangement may be. This doesn’t help with liquidity but ensures a sense of collective resourcefulness and the notion of things getting done. Justin (Burls) has come to the rescue once more. The Holdsworth build has entered a tricky phase and one undoubtedly abhorrent to the purists. We’ve discovered the fork steerer is cut much lower than initially thought, too shallow even to accommodate the Levin, leaving three options. (a) Resort to a Shimano headset (b) Replace the steerer (c) Throw away the rule book and plump in favour of a carbon front end and Ahead configuration. I chose the latter. Before everyone throws their arms skyward in despair, I am retaining the originals but deviating from the script given an inexpensive carbon pair have come to my attention. This isn’t a credit card build; neither will I permit bodging, rather, lateral thinking will result in a complementary blend of modern and classic. Undeniably beautiful and ornate, the existing fork isn’t original so doesn't equate to an “authentic” frameset in the purest sense. A modern fork with more generous rake will improve handling-especially over longer courses, reduce weight, provide greater cock-pit rigidity and entertain a short reach dual pivot brake calliper. There’s always the option of returning to the period unit should a suitable headset come into my possession and/or the carbon model lose its flavour.

On a lighter note, Justin installed the bottom bracket with his trademark precision, noting an impossibly small imperfection along the top-tube! He’s kindly invited me to pop back with the new front end at a mutually convenient time.

Elsewhere, liquidating some unwanted stock released some capital allowing completion to budget without dipping into very shallow reserves. There’s a ninety day wait for the wheelset but this allows me plenty of time to think and plan. Other than a test of my patience, it serves to illustrate shoestring builds needn’t be synonymous with cutting corners or bad workmanship. The reflex action of sliding a credit card across your friendly bike dealer’s counter undoubtedly provides a warm glow for all concerned but from my perspective, low budget, highly imaginative projects cultivate resourcefulness and other peripheral skills.

Another cliche’ is the throw away society. The number of people paying lip service to this whilst generating waste in shocking quantities never ceases to astound me. In a world full of quick fixes, skilled repair is regarded unfashionable and inconvenient, recycling as eccentric or stooped in pseudo hippy overtones. However, it’s amazing what serviceable and moreover, sharp looking things can be fabricated from scrap. Old frames, especially low-mid range plain gauge Cro-moly mtbs are plentiful, languishing in skips, abandoned on street corners or in back yards and make great foundations for versatile second or “working” bikes. Even damaged examples can be cut up and re-born, as neat cargo trailers-all that’s needed is a weekend and some basic skill with a MIG welder.

Heavier, plain gauge frames are ideal for this, having greater tolerance to MIG than thin wall tubesets (e.g. Tange Prestige, Reynolds 531 etc). MIG, unlike other forms of welding is a semi-skilled process developed during the Second World War to address a shortage of skilled labour and a need for fast production techniques within munitions factories. Given it’s versatility and ease of use, it quickly found favour with the automotive industry and good hobby units cost a very modest £140 (Gas bottles are about £15 and factor in £15 for a serviceable dark shield). Crudely, with about ten minutes instruction an absolute beginner can produce some serviceable, if agricultural looking welds- if you can draw a straight line using a board marker you can quickly master the basics of MIG. Before long you’ll be whipping together bike storage, trailers and all manner of useful stuff from scrap and finished in powder coat, they’ll look new.

Accommodating the Holdsworth has necessitated the donation of my late father’s hub geared and braked Pashley to David Hunt, our local agent for Recycle. Recycle are a charity shipping unwanted bikes to Africa. Here in the west, it is easy to overlook the inseparable link between transport and development. It can be very difficult for a children in more remote villages to access education. Providing them with a suitable bike doesn’t eradicate inequality but provides one fewer obstacle and empowerment at a wider level. In Namibia, old roadsters stripped of mudguards and ancillaries ensure AIDS workers and ambulances can reach remote villages.

Bikes like Dad’s Pashley, lower end Mtbs etc are sold to finance containers and other shipping costs. David, a former motor mechanic stumbled across Recycle quite accidentally, couldn’t resist greater involvement and so became an agent. These days his garage is bulging and it has become an informal community resource, entertaining a procession of villagers during my relatively short visit. His generosity and warmth of spirit extended to a very nice looking headlamp that will plug straight in to my hub dynamos. He even supplies stands, panniers and other spares for the local post-office fleet which would otherwise take months to arrive.

Knee jerk cynicism encourages overly simplistic reasoning of the sort suggesting corruption within the sub-continent will see much "disappear" or otherwise fail to reach their intended recipients. We cannot ignore these darker realities but there is nothing to suggest this has been problematic for the charity. Schemes such as Recycle aren't going to miraculously change the world overnight, no more than the election of president Obama (Albeit both symbolic and significant cultural shifts in their own right) However, changes result from small but continuous evolutions. I can’t pretend it was easy passing Dad’s bike to David but it would've met with his approval and in some small way, my Father's generosity of spirit lives on.

Raiders of The Lost Seat Bolt

A series of events have conspired against faster progress of the Holdsworth build- most notably the relative difficulty in obtaining one inch threaded headsets. There’s a misconception, an urban myth banded about on club runs that one inch components are in plentiful supply. On the contrary, try looking for a good quality threaded fork or headset and you’ll discover they’re as rare as rocking horse droppings. I had settled for a chrome or aluminium Tange Levin but along with the other black components, serendipity has secured two! A black Levin and an alloy Acor unit running on an interesting ball/needle bearing hybrid. Two decades outsourcing to Taiwan coinciding with the dominance of mtb design, is forcing the traditional binder bolt to the point of extinction. Mercifully, Lloyd at Ison distribution (http://www.ison-distribution.com/) has come to my rescue, supplying a couple of 19mm Campagnolo copies.

The recent inclement weather sweeping the UK has presented me with some welcome additional research/surfing time and I was hunting for a suitable square taper bottom bracket (68X110). The simplest solution was to plump for Shimano’s venerable UN52/3/4 fit and forget staple- I’ve had several of them churn merrily up to 10,000 miles without flinching and £24 was well within budget. However, I have a leaning toward the esoteric and spotted an Acor unit- seemingly identical in composition but ten pounds cheaper- a saving which will be channelled into handlebar wrap and some decent brake cable. There’s no doubt from a mechanical perspective, ISIS systems are stiffer and a better bet for powerful riders weighing closer to 90 kilos but my 181 cm 70 kilo frame finds taper units perfectly adequate.

The sudden flurry of snow which has literally gripped the nation (Readers from Utah will now fall from their snow-blowers in hysterics) hasn’t unleashed a great deal of pioneering spirit-aside from my trip around the motorway in “blizzard” conditions. Make no mistake, despite only being a few inches, the UK infrastructure isn’t geared up to tackle this, meaning widespread chaos- the only place I didn’t see a uniform covering of snow was atop the Magnox reactor some four miles across the water. I’d toyed with shoding the Univega with Nokian studded snow rubber but haven’t put theory into practice as yet and I’ve bought in a five litre drum of Waxoyl rather than brewing my own to internally safeguard the Holdsworth and Ka chassis-silly really given the ingredients are readily (not to mention cheaply) available….
What you’ll need:

2.5 Quarts Turpentine
12 Oz Bees/Candle wax
1 Quart Light Machine oil
A liberal application of common sense

Boil, Boil, Toil & Trouble

Before any of the congregation write threatening litigation, Here comes the disclaimer. First and foremost this is a potentially explosive mixture- keep away from naked flame and sources of ignition. If you have even the smallest doubt in your mind, go the commercially available route- when I last looked, brewing your own corrosion inhibitor wasn’t covered by most household insurance policies. Ensure plenty of ventilation before you start. Store the mix, clearly labelled and safely out of the reach of children and pets.


Grate the candle/beeswax into the turpentine and stir laboriously with an old wooden spoon until fully dissolved- this can take some time. Performing this task in a warm room accelerates the process but be very careful. When fully dissolved, apply the machine oil to thin the consistency to the point where it can be sprayed. For best results buy a cheap pesticides spray kit from a garden centre and pour the contents inside (CLEARLY MARKING THE CONTAINER). Apply liberally inside the bottom bracket or seat-tube, placing a layering of newspaper beneath to collect any over-spill/leakage. Ensure even coverage by rotating the frameset or bike and allow to stand overnight in a warm corner of the house. Later applications will demand softening by standing the mix in hot water for twenty minutes. Remember to cleanse the pump spray nozzle with thinners/white spirit before storing.

A Visit to Justin Burls

It fits! It fits! Some of you would argue on account of and due-to but the new seatpost does indeed fit. In keeping with quite a few budget models, it seems quite tight but from another vantage point this means water and ingress are unlikely to find their way into the seat-tube. Not that the Zephyr is a winter mount but I treat all my bikes very much the same-a liberal application of Framesaver or similar sloshing around the tubes, a stout greasing of all contact points etc, etc.

Need an old fashioned Campagnolo or Miche saddle bolt to secure it in place (obviously) before I can turn my attention to a suitable headset- seen a nice FSA unit with a suitably low stack height(in black oddly enough) which will take care of the front end but I fear this might still prove on the tall side and the venerable Tange Levin, a faithful Campag Record copy might just save the day...

Tucked away in a quiet corner of Harwich is frame builder Justin Burls (http://www.burls.co.uk/).

A background in classic vehicle restoration and metal forming has equipped him with an unsurpassed attention to detail making the transition to frame building a surprisingly easy one. He still has his first frame- A TT mount built for his own pleasure back in 1997 sporting super smooth fillet brazing and deep, luxurious blue livery. Typical of many artisan craftspeople, Justin speaks with a very genuine modesty. Self taught, he believed the mythical black art would demand several attempts before he produced anything remotely ride able but from the outset, he clearly found it a very natural process.
Amused by the horror in my face at the sight of his battle weary, salt encrusted winter bike, Justin confesses his passion lies in building and engineering to the highest standards at the detriment of his bike’s maintenance. This, his second build, again crafted from Columbus tubing still retains an air of majesty beneath the grime. His experience as a coachbuilder saw him finish his early frames in cellulose paints topped off with clear coat two-Pac. However, cellulose attracts every airborne imperfection, demanding laborious application and rubbing between coats.
Leading me through his enormous workshop (which is close to, if not larger than his house) hangs another frame- a road fixed built to Manchester track specification but with drilling for a front brake. Used predominantly for time trailing, it sports deliciously machined ends and a custom made chain-ring. Elsewhere forks stand in neat line along the floor and a Brian Rourke track frame adorns the wall. Whilst busy taking orders from the UK, Ireland and as far afield as Finland and Canada, Justin is reticent to perform cut and shut frame end surgery.Less conscientious builders might be satisfied with simply extracting the old road dropouts and brazing new track units in but Justin’s attention to detail demands he makes an exacting job complete with fresh enamel and in many cases this exceeds the donor frame’s value. Similarly, whilst cheerfully fabricating bespoke forks to complement a frameset, he has a preference for carbon models.

Most recently he’s been importing high-end (grade 9) Titanium framesets from a supplier east of Moscow (His wife, Mila being Russian, is pivotal in this side of the business and negotiating with suppliers). These feature drillings for brakes, one set of bottle mounts, fender points and 23mm tyres. Titanium whilst expensive, is very given to winter duties thanks to the wonder metal's corrosion and fatigue resistance and I found myself salivating at the low weight and minimalist splendour of his personal machine, complete with Reynolds carbon fork. He used to offer a unicrown Ti option but this has ceased thanks to a lack of continuity from the supplier and the fact Titanium in his opinion shows its best qualities as a frame material . Elsewhere there’s a Dawes Galaxy tandem on which he introduced Mila to Cycling- it’s needing some light TLC and a wheel re-build so is out of commission for the moment. A chill coastal wind brought us back into the comfort of the house where more frames including a bespoke MTB frameset for Mila crept from behind sofas and televisions. There’s a real sense of old world charm, an interest in people and the desire in seeing a job executed to perfection which drives him and so many others above financial gain. We’ve promised to meet for a ride sometime soon and the only downside to meeting Justin is a sudden and irrational yearning for a Russian Ti road fixer!

Evolution- the solution?

The cycling equivalent of a life laundry continues. Further foraging has uncovered a set of unused Cinelli Spinacchi mini-tri-bars. Once popular amongst the professional ranks thanks to their provision of alternative hand positioning without falling foul of UCI ,they've largely fallen into obscurity. However, They're ideal for the Holdsworth build- offering useful aero advantage on ten mile TT courses (my chosen outlet for the constructive exorcism of inner demons) without detracting from the classic lines/period feel.

It would appear I am a man of contradiction, serendipity seeing me opting in favour of flared (46cm) WTB drops, colour co-ordinated stem and 400mm Outland seat post over the silver anodised/polished parts initially earmarked for the build. Seat post choice was more limited than I had hoped, although there were some very fetching silver Nitto models and even SR’s legendary TCO (Tall cool one)- a one time MTB aftermarket favourite I hadn’t seen for a good eighteen years and almost bought out of sentiment.

I’ve found the wheelset and a suitable, dual pivot brake calliper so as not to fall foul of the law. Meanwhile, back in the jungle, the Ka’s expiring clutch cannot be ignored any further and I’m still battling an errant publisher for considerable monies owing. The sudden and unprecedented cold snap has demanded the bespoke road mount enjoy some enforced rest. Sleet, snow, ice and lashings of road salt has restricted anything beyond virtual riding to the venerable Univega RTB. Should this much hyped "Big freeze" continue I'll be looking to fit Nokian studded snow rubber! Ideal conditions for a fixed in many respects- braking by holding off against the cranks gives a notably smoother, more predictable passage over slippery surfaces.

Stout and sure footed as the Ilpompino's 38mm WTB rubber may be, an mtb configuration remains my chosen steed for ice and snow. On the subject of big freezes, this is precisely what my bank has actioned on my account thanks to the antics of online thieves (describing these people as "hackers" gives them an unwarranted air of legitimacy/honour) further adding to my fiscal frustrations.

Joshua hasn’t been out on his tag-along for a couple of weeks given the blend of ice and wind chill, although he’s very pleased by the addition of a basic suspension post, taking the sting out of rougher lanes and trails. Coil sprung units, whilst hardly the last word in refinement are very simple, unaffected by weather to the same degree as elastomer models and provide adequate damping for lighter riders.

I am also considering some very simple modification to his tag along’s hitch which, endemic to the breed is a little sloppy, translating in a whippy ride under load. My plan is to upgrade the simple roller pin with some thin nylon washers, reducing some of the play without adversely affecting handling or voiding the warranty.

The Cleat again...Sounds like a sequel to a 50's horror flick. The recent chill has seen me opt in preference for my mtb race shoes with stainless Spd pattern cleats-primarily as the rancid odour from my trainer type was stripping wallpaper. Cursory inspection of cleat integrity suggested they were good for another few thousand miles. Updating the Univega's pedals in favour of more contemporary Spd designs raised a compatibility question mark and explains my relative nonchalance at their failure to clunk, clip every trip. Rapidly nearing the lane's end, feet fully engaged I was relaxed and enjoying the ride. This casual indifference was once again to prove my undoing upon my return home...

Releasing my right foot, my left flatly refused to disengage. Desperation set in after a couple of minutes and only after exiting my foot from the shoe and manipulating it in every conceivable direction effected disengagement. Today's culprit? Rider indifference and loose cleat screws...Lessons have be learned.... Now where have we heard that before?