Thursday 2 April 2020

Heavy Duty









The present lockdown is presenting considerable challenges for everyone. Stoicism, riding and creativity are my coping mechanisms. Broadband and similar connectivity are also creaking under the strain, presumably as there’s unprecedented demand. In my case, I'm also at the very end of this line. 

Experiences with standard (and otherwise very serviceable) track chains, such as this SRAM PC1 have led me to conclude that beefy ½ link track types are the best fits for me and my fixed gear builds. Models such as the PC1 and this Passport Elements Anti Rust Chain https://www.sevendaycyclist.com/passport-elements-single-speed-chai  are pretty good choices for bikes with single speed freewheels but fixed transmissions are subjected to greater stresses. 

Traditionally half-link chains were aimed at riders of conversions (i.e. geared framesets that have been converted to fixed gear use), where getting chain tension/length just right can be particularly tricky. There’s a lot of conflicting debate regarding their benefits and indeed, otherwise.   

I’ve switched to this KMC Kool HL710. White isn’t the most obvious colour choice but neutral enough and going for the proverbial song.  Before its arrival, I discovered my fixed gear winter/trainer’s rear Schwalbe Marathon GT decidedly flaccid.  

A flat, though thankfully fixable. However, the GT’s casing was starting to wear a little flat in places, so I took the opportunity and swapped it for this Vee Tire Co Zilent. https://www.sevendaycyclist.com/vee-tire-co-zilent-tyre

This one is a 35mm section, though seems fractionally narrower than the Schwalbe, which isn’t necessarily a bad thing either-gives a little more breathing space within the chainstays. The Zilent are a similar breed of tyre. One aimed at e-bikes and commuters.  

In common with the Schwalbe a two-layer puncture repelling armour. Works to the same capillary principle, pushing sharps out, before they can nick the tube. Operating pressures are a little lower, ranging from 35-65psi, whereas the Schwalbe Marathon GT go to 85 psi, the 42mm Zilent has a range between 45 and 80 psi).  

The Zilent2 https://www.sevendaycyclist.com/vee-tire-co-zilent-mark-2-tyres was devised upon discovering people were using the original Zilent for long-haul touring-something they wasn’t intended for and resulted in sidewall failures.  Up front I substituted the sprightly and compliant Soma Fabrications Shikoro https://www.sevendaycyclist.com/s  for the Continental Contact plus.    

I’ve gone for the 37mm- gives a little extra clearance upfront (not that it’s ever been an issue with the 42mm). The 37mm Contact Plus run between 65 and 85psi, whereas the Shikoro range between 35 and 90psi. 

Sure, the Contact Plus are a very different tyre, compared with the Shikoro. Closer to the Vee Tie Co Zilent, in fact, which should make for a very reliable, reciprocal mix. 


Despite the country being on “Lockdown” I’d be surprised if the police have the resources to enforce, beyond densely populated towns and cities. I’ve noticed a pronounced spike in the amount of fly-tipping. Discarded (broken) beer bottles also seem more prevalent and would also explain my switch. 

Shipping the Contact aboard the front Halo Evura https://www.sevendaycyclist.com/halo-evura-shutter-precision-sl9-dy hoop proved unexpectedly challenging though. It claimed two basic resin levers and almost sent a very nice Pedros’ over a 6foot fence. In the end, this VAR won the battle. Suffice to say, I’ve stashed that in the Carradry, in case I should flat by the roadside.  

Not been an issue with these, or their 42mm counterparts to date, although it’s worth noting that, no matter how rugged your rubber, tubes can fail at the valve heads. So always advisable to pack a spare or two, decent tyre levers and of course, a pump. I carry two mini pumps, and three tubes just in case.  

Overkill in some respects. However, one tube may get another stricken rider home and they consume nominal space in the SQR tour and Carradry bags. Oh, staying with tyres and inflation, Steve’s been quite impressed with this Zefal Profil Max FP60 Z-Turn Pump https://www.sevendaycyclist.com/zefal-profil-max-fp60-z-turn-pump 
This lovely CNC machined ring arrived from Raval. Made from CNC machined stainless steel, the climb down from 42 to 38 teeth gives a range between 34 and 89 inches. True, I sacrifice a little top end but gain a bit more mid-range, which is arguably more practical/efficient, given the bike’s design brief.  

Oval rings are to some an unusual, arguably controversial concept that comes in and out of vogue. Shimano Bio-Pace was the one most remember but several brands, including Stronglight (Bio strong) and Suntour (Oval tech), joined the bandwagon. However, oval rings have been making a quiet but steady return since 2014. I’m looking forward to racking up the miles on ours.  

No, not nostalgia talking (although it was popular during those halcyon days where I discretely read the cycling press and ogled high-end bikes, from my desk, while world-weary teachers feigned interest in us and in some cases, the curriculum being taught).    

Wednesday 25 March 2020

Self Containment












 The present state of siege is presenting opportunities and threats in equal measure. Social distancing has been an ideal opportunity to get out and test kit, fettle the fleet’s specification and forward plan. I’ve been startled by the Pro Gold chain lube’s friction busting prowess.  
Even allowing for the new chain, the transmission and shifting feels that bit snappier. A notch better than the otherwise likeable Zefal Pro Dry lube https://www.sevendaycyclist.com/zefal-pro-dry-lube and marginally cleaner, thus far. Then again, its nearly twice the Zefal’s ticket price, so I’d hope so. 

Little surprise to learn the bond between my posterior and the Cycles Berthoud Soulor Saddle continues to grow. I’m still feeding the hide every few rides to accelerate perfection and there’s a definite patina forming, so all good.  

A puncture (traced to a faulty valve stem) coupled with sunnier, drier conditions prompted a switch to my fixed. The Sugru Mouldable Glue Original Formula https://www.sevendaycyclist.com/sugru-mouldable-glue-original-formu appears to have solved the Tom Tom Bandit’s wibbly bracket and I’m enjoying the Soma Condor 2 again https://www.sevendaycyclist.com/soma-condor-2-shallow-drop-bars   

Now the weather’s more spring-like, I’ve reinstated the Apeman A80 Action camera https://www.sevendaycyclist.com/apeman to the Univega’s bars. The switching of my fixed gear winter/trainer’s Titanium Torus post, back to the very likeable Genetic Syngenic Seatpost https://www.sevendaycyclist.com/genetic-syngenic-seatpost may raise a few eyebrows.  I’ve also reverted to the Spa Cycles Aire titanium saddle- it was already in situ, so why not? It’d long assumed my shape-bliss! 

However, look closely and you’ll note the Torus has a relatively pronounced layback. The Genetic is nigh on inline. The most obvious benefit of an inline model is it brings the rider in line with the bottom bracket and theoretically improves power transfer.  

It also brings me closer to the bars. The Torus’ layback also made fitting/removal of the Carradice Carradry SQR bag https://www.sevendaycyclist.com/carradice-carradry awkward, which the switch has also solved. This also presented an opportunity to put the Juice Lubes Bearing Grease through its paces. After all, if it's designed to keep bearings smooth and happy, so should last a good while on contact points.  

Ah, but then it’s also lithium-based, which can conspire with the elements, creating the chemical reaction more commonly known as a galvanic seizure. Suffice to say I will be keeping a very close eye on things. Lithium-based preps will also scoff seals and other rubberised components.   
  
When it comes to greases, we tend to test on a mid-long-term basis. This allows us to make a proper evaluation of its staying prowess, reactions to changing environments and riding contexts etc. 
Talking of contact points, here’s our clipless pedal overview https://www.sevendaycyclist.com/stepping-in-a-guide-to-going-cliple  

While social distancing is paramount, some human contact is unavoidable. Last Friday, while my helpful local garage was sorting the KA’s puncture, Maldon Shot Blasting & Powder Coating rescued the slightly scabby spare wheel holder.   

Though generally solid, upon blasting, we discovered the salt monster had been nibbling, resulting in some pitting and a small hole. Little surprise, given it was the original, thus 13 years old.  

However, we decided it wasn’t a structural weakness, so no call for plug welding. Besides, I’d come to them unannounced with a “could you blast and fit in” request.   
The thick zinc-rich epoxy primer and polyester colour coat would lock the elements, and further corrosion out. 

A big thank you to Graham, Chris and the team at Maldon Shot Blasting & Powder Coating for their kindness, can-do approach and exemplary standards. https://www.sevendaycyclist.com/aluminium-frame-refurbishment