Ringing the Changes

  

Having swapped the Mirage for the carbon with Middleburn and Campagnolo Record, I have saved 83g, which was less than I’d expected but saving grams wasn’t the primary, or indeed, original mission.  

Having bolted the rings together and snugging them down “blind” the first sticking point was discovering the Xenon did not employ self-extracting crank bolts, necessitating a quick root around for the crank puller. Not a hardship, but it was not where I’d expected to find it.  

I toyed with treating myself to a Park CCP-22 complete with integrated handle, since Holdsworth, Fixed Gear Winter/Trainer also use square taper cranks (although the Holdswoth’s Stronglight employ self-extracting bolts). However, by and large crank removal is rare and usually coincides with bottom bracket replacement (between 6,000 and 10,000 miles, depending on what fit n’ forget-sealed model I’d gone for).

  

Extractor found; the Xenon literally popped off their tapers-hardly surprising but welcome. A quick tug of the ACOR cartridge bottom bracket also ruled out any slop or grumbling. I might go for something lighter when these strike. Something with a carbon fibre spacer, alloy cups would save a few grams... Back to the crankset.   

Slid on the tapers, I found myself needing to raise the front Victory mech up a few millimetres and for some reason, it got the sulks. Nice new cranks, lovely new rings, what’s going on here???? I mused... 

Hmm, a new cable might sort things- costs pennies and I had a few in. Yup...the new cable sorted matters and the cage was swinging the Sachs chain snappily to and fro. I pruned the cable, leaving a little to subvert potential stretch overnight. Checking the Sachs chain while I was there confirmed it was in good health (although I had a KMC in stock, since these things usually expire at the least convenient moment).  

Continuing the weight saving, knee-friendly theme, I slipped some Peaty’s Bicycle Assembly Grease on the threads and whizzed Time ATAC in- the resin, rather than aluminium bodied versions. A quick once-over of the crank bolts and chain rings the following morning, shifting checked, I topped up the CST Cito CST Cito Folding Tyre | cycling-not-racing (sevendaycyclist.com) with the SKS Air-X-Plorer Digi Floor Pump 10.0 SKS Air-X-Plorer Digi Floor Pump | cycling-not-racing (sevendaycyclist.com) and popped it away ready for a shakedown ride the following morning.    

Wetter weather and the urge to explore green lanes and bridleways has meant Ursula and I have been out to play a fair bit, too. I’m warming to the Maxxis Ikon in these contexts. As I’d expect from a small block model, they’re less ponderous than a more aggressive trail tyre on metalled roads and come into their own along dry singletrack-plenty of smiles per mile. 

 

Despite being the baseline version, the ride is compliant and I’m yet to flat. Kenda Small Block 8 were quicker off the mark and a bit livelier but also more prone to flats. Elsewhere, I’ve gone for Muc Off Dry lube, which is keeping the chain clean and returning reasonable miles per application. It’s also been the ideal opportunity to see how the Madison Roam perform off road proper.  

Time also allowed me to replace the fixed’s Stronglight in favour of the FSA Orbit MX. The latter’s stack height is a little taller-only by 5mm and easily solved by dropping a spacer. When it comes to headsets, stoicism is my default grease-wise. I want the stuff to say put, keep the bearings slick and corrosion-free. Now, the MX is also blessed with seals, which is nice. It’s another reason to avoid lithium or PTFE-based greases since these could cause perishing.  

Some lighter middleweight preps, including Muc-Off Bio Grease and Green Oil Eco grease hold their own surprisingly well, too TWELVE MONTH TEST: GREEN OIL ECO GREASE (sevendaycyclist.com) Flying in the face of this, I found myself pondering Peaty’s Speed Grease PEATY'S SPEED GREASE | cycling-not-racing (sevendaycyclist.com), for the last word in buttery smooth, friction busting lubrication. Ultimately, I’ve decided treating the bottom race with Juice Lubes Bearing Juice and the upper race with Peaty’s Speed Grease was the best compromise.  

Heavy Duty

The present lockdown is presenting considerable challenges for everyone. Stoicism, riding and creativity are my coping mechanisms. Broadband and similar connectivity are also creaking under the strain, presumably as there’s unprecedented demand. In my case, I'm also at the very end of this line. 

Experiences with standard (and otherwise very serviceable) track chains, such as this SRAM PC1 have led me to conclude that beefy ½ link track types are the best fits for me and my fixed gear builds. Models such as the PC1 and this Passport Elements Anti Rust Chain https://www.sevendaycyclist.com/passport-elements-single-speed-chai  are pretty good choices for bikes with single speed freewheels but fixed transmissions are subjected to greater stresses. 

Traditionally half-link chains were aimed at riders of conversions (i.e. geared framesets that have been converted to fixed gear use), where getting chain tension/length just right can be particularly tricky. There’s a lot of conflicting debate regarding their benefits and indeed, otherwise.   

I’ve switched to this KMC Kool HL710. White isn’t the most obvious colour choice but neutral enough and going for the proverbial song.  Before its arrival, I discovered my fixed gear winter/trainer’s rear Schwalbe Marathon GT decidedly flaccid.  

A flat, though thankfully fixable. However, the GT’s casing was starting to wear a little flat in places, so I took the opportunity and swapped it for this Vee Tire Co Zilent. https://www.sevendaycyclist.com/vee-tire-co-zilent-tyre . 

This one is a 35mm section, though seems fractionally narrower than the Schwalbe, which isn’t necessarily a bad thing either-gives a little more breathing space within the chainstays. The Zilent are a similar breed of tyre. One aimed at e-bikes and commuters.  

In common with the Schwalbe a two-layer puncture repelling armour. Works to the same capillary principle, pushing sharps out, before they can nick the tube. Operating pressures are a little lower, ranging from 35-65psi, whereas the Schwalbe Marathon GT go to 85 psi, the 42mm Zilent has a range between 45 and 80 psi).  

The Zilent2 https://www.sevendaycyclist.com/vee-tire-co-zilent-mark-2-tyres was devised upon discovering people were using the original Zilent for long-haul touring-something they wasn’t intended for and resulted in sidewall failures.  Up front I substituted the sprightly and compliant Soma Fabrications Shikoro https://www.sevendaycyclist.com/s  for the Continental Contact plus.    

I’ve gone for the 37mm- gives a little extra clearance upfront (not that it’s ever been an issue with the 42mm). The 37mm Contact Plus run between 65 and 85psi, whereas the Shikoro range between 35 and 90psi. 

Sure, the Contact Plus are a very different tyre, compared with the Shikoro. Closer to the Vee Tie Co Zilent, in fact, which should make for a very reliable, reciprocal mix. 

Despite the country being on “Lockdown” I’d be surprised if the police have the resources to enforce, beyond densely populated towns and cities. I’ve noticed a pronounced spike in the amount of fly-tipping. Discarded (broken) beer bottles also seem more prevalent and would also explain my switch. 

Shipping the Contact aboard the front Halo Evura https://www.sevendaycyclist.com/halo-evura-shutter-precision-sl9-dy hoop proved unexpectedly challenging though. It claimed two basic resin levers and almost sent a very nice Pedros’ over a 6foot fence. In the end, this VAR won the battle. Suffice to say, I’ve stashed that in the Carradry, in case I should flat by the roadside.  

Not been an issue with these, or their 42mm counterparts to date, although it’s worth noting that, no matter how rugged your rubber, tubes can fail at the valve heads. So always advisable to pack a spare or two, decent tyre levers and of course, a pump. I carry two mini pumps, and three tubes just in case.  

Overkill in some respects. However, one tube may get another stricken rider home and they consume nominal space in the SQR tour and Carradry bags. Oh, staying with tyres and inflation, Steve’s been quite impressed with this Zefal Profil Max FP60 Z-Turn Pump https://www.sevendaycyclist.com/zefal-profil-max-fp60-z-turn-pump 

This lovely CNC machined ring arrived from Raval. Made from CNC machined stainless steel, the climb down from 42 to 38 teeth gives a range between 34 and 89 inches. True, I sacrifice a little top end but gain a bit more mid-range, which is arguably more practical/efficient, given the bike’s design brief.  

Oval rings are to some an unusual, arguably controversial concept that comes in and out of vogue. Shimano Bio-Pace was the one most remember but several brands, including Stronglight (Bio strong) and Suntour (Oval tech), joined the bandwagon. However, oval rings have been making a quiet but steady return since 2014. I’m looking forward to racking up the miles on ours.  

No, not nostalgia talking (although it was popular during those halcyon days where I discretely read the cycling press and ogled high-end bikes, from my desk, while world-weary teachers feigned interest in us and in some cases, the curriculum being taught).