It’s been a roller coaster
week. A full cable refit to Graham’s recently refinished mid 90’s Timberline
concluded my test of those Super B TB-WC30 Pro Cable Cutters https://www.sevendaycyclist.com/super-b-tb-wc30-pro-cable-cutters. I was also rather excited by a freshly blasted
racing tandem that prepped and plugged, ready for a zinc rich epoxy base
coat.
Turns out it’s an early 1950’s
Rory O’Brien. Part of the refurb involved removing braze-ons, including the
bottle bosses, which struck me as a curious move-even if the machine was being
used for short-distance TTs.
While the forks follow the
traditional lugged and brazed construction, the frame is beautifully fillet
brazed. Some would say this was an obvious choice for a pared to the essentials
race rocket for two, saving precious grams and making it harder to disguise
poor workmanship.
Urban myth, on both counts;
though not commonly practiced during this frame’s era, TIG welding still
translates into a lighter build, saving approximately 340g on a typical tandem
frameset.
Fillet brazing is a process
where brass is built up in layers, forming a very strong, uniform bond. A frame constructed this way stands a better
chance of survival following a collision with a tree, or parked car.
Talking of cars, anything
other than fusion welding will signal MOT failure but a decent coachbuilder could
successfully join two old school Jaguars together without any fear of failure.
Motorcycle frames were also fabricated using this method.
Being more labour intensive,
there’s a cost implication but less competent/experienced builders can still
get away with sloppy work. Done properly, large, smooth even fillets are all
you’ll see. Be wary of overbite (where the tube has been filed at the fillet).
This creates a stress point, which can result in premature and potentially
fatal frame failure.
John Moss has been focusing
upon getting the Mango’s Di2 and Alfine hub combo harmonious but a
conversation about machine shops and this Chinese made titanium seat post
ignited his curiosity. Staying wit the Di2, he’s been having problems getting
the shifters to communicate as he’d hoped with the 11spd Alfine hub. John’s
career as a highly skilled technician means he loves to diagnose, fault find
and continuously improve equipment.
I explained I had a 27.2 Ti
post doing something nothing close to nothing and was toying with the idea of
having it machined down to 26.0. This could then replace the Univega’s
otherwise likeable BBB skyscraper. After some calculations and precision
measurements, he calculated with a carbide tip, he could shave 136mm from the
bottom, thus it would slide securely into the tubby tourer’s seat tube. Modern
social history, human geography and industrial decline are subjects that have
always fascinated me. Most cities have their no-go districts, or at least those
with ill-repute.
Hillfields in Coventry has an
unenviable reputation for being the city’s red-light district. Levels of
deprivation are high, just as some inner London Boroughs including Hackney
(despite the latter’s superficial gentrification, some might say,
socio-economic cleansing).
However, it’s renown for being
the region’s red-light area, drugs and associated criminal activity being
consequently rife. I had always presumed this had been a relatively recent phenomenon,
a’la Dagenham intensifying when the car factories and similar business left.
Anecdotally John and several
other reliable sources refute my hypothesis. I’ve heard tales from the 1950s of
organised criminal activity, including protection rackets, money laundering and
of course, drugs. During the 1950s a smartly dressed young man walked into a
Café’ and was greeted with smiles and warm acknowledgement.
A few minutes later, a woman
running said eatery heard a scream and discovered the young man’s throat had been
slit-in road daylight. She called for an ambulance and applied pressure to the
wound using a clean tea-towel until paramedics arrived. The man survived.
Conversation with Graham at
Maldon Shot blasting & Powder Coating suggested painting the exposed
section satin black wouldn’t be an issue either. It was decided that because of
the metal’s characteristics, attempting to blast the surface (giving the paint
fighting chance of staying put) was a non-starter, so he’d use an acid etch
primer instead...Stay tuned…
