Flashbacks & Fancies

While mooching around Coventry’s Fargo Village, I was drawn to “The Bike Box”. Initially, by a Surly pacer and this Salsa. Being Sunday, I wasn’t entirely surprised to discover the shop closed. However, peering in through the window, I noticed this Holdsworthy Claud Butler.

An early 80s, 531^ST frameset built around period sensitive, yet broadly contemporary components. Colour aside, the frameset was almost identical, to a 1982 Super Dalesman, that seduced me, and my paper round savings, 29 years 1 month ago.

It cost me £250 at the time. £125 of which, I borrowed from my mother. A tourer that handled beautifully, laden or otherwise and one I remember, with great fondness.

Thankfully, Sharon came to collect me at this point. Being an empath, she humoured me, then whisked us away to a very pleasant Turkish café’. Elsewhere, the Holdsworth and I have been enjoying the clement conditions.

Perky and pared to the essentials, there’s been plenty of smiles per mile too. I was tempted (when Lee Cooper graciously performed the bottom bracket shell replacement and other, remedial work) to have a set of bottle bosses added. However, while its far from period, I want to keep the frame original-structurally, at least.

Hence, I’ve gone the strap on route. (You at the back, stop sniggering!!!) The slightly dumpy, though extremely practical SKS unit, has been joined by Topeak’s infinitely prettier Versa mount.

I’ve whipped this carbon composite Enigma bat-wing design. On an aesthetic note, I should probably swap the Elite Ciussi, for the Boardman cage clinging to my Univega’s downtube.

The Versa mount can be mounted in a variety of ways, to entertain small/compact geometry frames and even folders-head tubes, seat posts, or even fork legs are a few obvious alternatives. 1.2 kilos, is the maximum payload. One trick ponies in some respects. You certainly wouldn’t deploy them as a P-clip substitute for 4point carriers.

Continuing the swapping theme… I’ve swapped my fixed gear winter trainer’s Syncros matchbox cage for this bright green Vel race cage. A much closer match, pattern-wise, to the Deva.

At 34g, its made from a composite resin, which in turn is painted and lacquered for a glossy, durable sheen.  I’ve also exchanged said machine’s Brooks swift pattern perch, for this BBB Echelon.

The Echelon has a unique, dare I say characteristically Dutch flavour.  It supposedly straddles mtb and road genres, suggesting it’ll be a viable option for rough stuff and gravel too.

This is the 141, which is slightly misleading, since its actually145mm wide, 265mm long. 2mm broader than the toupe’, which may prove a more suitable option for my ‘cross biased fixed.    

Another cutaway design, it features a carbon reinforced shell, EVA foam padding and a durable, faux leather cover. Hollow Cro-moly rails with adjustment scales strike a good strength to weight ratio and make setup straightforward. Especially, if you’re swapping it between bikes.  

Having done 400 miles on the Vee Tire Co Zilent and crucially, reached some tangible conclusions, I’ve switched to The Soma Shikoro upfront. https://www.sevendaycyclist.com/s  A supple, compliant ride to match and indeed, compare with their 33mm Supple Vitesse cousins.

Talking of Soma, here’s my review of the Condor bars https://www.sevendaycyclist.com/soma and the Lizard Skins DSP https://www.sevendaycyclist.com/lizard-skins-dsp

Elsewhere, Sinner have been in touch with me, regarding the refinishing of Mango bodies. According to Melvin, these are in fact made from Gelcoat. A composite but not actually carbon fibre as first thought. We are advised that a decent car body finisher should be more than capable of repainting to a high standard.

I’m inclined to say that many will regard the Mango as specialist equipment and politely decline, as tends to happen with motorcycle components. A project finisher, or someone working with motorcycle GRP (fairings etc) is likely to be a better bet. John is also looking to upgrade the gearing to a triple, for greater range.

He’s opting for 28/40/70. However, we have discovered the Sunstar battery assist’s spider, will only accommodate two rings. Therefore, I have contacted Sunstar, asking if they produce a compatible pattern, capable of accommodating a triple.

John is talking in terms of making a custom model from stainless steel; or modifying the existing setup. No surprise, given he’s a retired engineer but I’m thinking a stock model will be a more efficient use. of time and other resources. Talking of models, here’s some more from last week’s shot with Krystal J.

Front Ends & Fargo Revisited

After all the drama associated with procuring forks, callipers, wheels, rotors and hoops, I headed north to the midlands and to Coventry’s arty fargo district for some photographic inspiration. Plenty to see and further units are being built to accommodate its steady expansion. Back down south, I awoke early and decided it was time to prepare the Kinesis fork and gen up on Avid BB7’s.

The Kinesis steerer proved shorter than many I’ve come across given its racing credentials, so having double checked the measurements against the Ilpompino’s existing ITM Vista, I introduced my Cyclo cutting guide and pruned it to 23cm. Worst case scenario, I could always loose a spacer and adopt a slightly racier stance but there’s no excuse for sloppiness…

For this very reason and given my present workload, I wanted to complete this job in carefully executed stages, so tiredness didn’t lead to mistakes and/or frustration.  I was fairly confident the existing Tektro lever would pull sufficient cable, though a quick rummage through the spares draw unearthed its black, V brake cousin-which proved surplus to requirements.

On a roll, I introduced the crown race before putting the project to one-side, earmarking that evening for transplant surgery.

Everything came together without too much fuss and persuading the Avid’s to play nicely proved easier than I’d expected…After some initial cartwheeling, the state of euphoria bombed when the headset bearings proved baggier than MC Hammers’ trousers.

A new set of caged balls basted generously in white lightning crystal grease, musical spacers and a Gusset “headlock” clamping system dialled things in perfectly. For the time being I’m going to enjoy the new set up sans front mudguard, since the stays were a little short and fouling the calliper’s torque arm-causing pads to drag on the disc.

Axiom probably has a gizmo or two, which will solve this small but irritating puzzle. Failing that I’ll have to seek out something aesthetically compatible with a single stay…

Elsewhere, we’ve decided to offer Seven Day Cyclist as a free downloadable publication-starting with number 8. Back issues are also available simply by clicking on the appropriate tab: www.sevendaycyclist.co.uk

Nirvana?

November arrived and once again, I spirited myself off to the midlands. I’ve always been wary of gentrification since intentionally, or otherwise, it can equate to socio-economic cleansing, changing communities forever.

Coventry has experienced decline harder than most-evident in children’s faces. Once hub of the transport industry and home to many household names, you can almost hear the Special’s seminal “Ghost town” playing a soft accompaniment as you pass the former car plants, derelict pubs and empty shops. Far from being disparaging, I am very fond of the city and its rich, colourful history.

On this occasion, we found ourselves in Fargo village, a creative space hosting galleries, studios and independent retailers. Parallels with London’s Spitalfields’ and Brick Lane districts are perhaps inevitable but it’s not trying to emulate my once beloved East-End and I found plenty of photographic inspiration.

Winter is literally around the next bend, although temperatures have been decidedly mild until now. Traditionally harsh, it remains richly rewarding so long as rider and machine(s) are appropriately dressed. 

Clothing needs to keep us dry, yet temperate and while reliability presides, bikes must be suitably inspiring to entice us outside. Indeed some pundits are prophesising harsh weather front originating in Russia will hit the UK around New Year, causing temperatures to plummet to record lows. Looks like spiked tyres will make reappear on the Univega afterall!    

http://www.pocketmags.com/viewmagazine.aspx?titleid=2582&title=Seven+Day+Cyclist

On a brighter note, we’re delighted to announce the arrival of “Seven Day Cyclist”-a new consumer focused magazine with a slightly different perspective. The first issue is available on pocketmags for less than your typical Latte’ and features a thorough road test of this Foffa Urban, these Axiom racks and a fair bit of grass roots touring too.