Studio & Beyond

I’ve been back in the studio doing fine art nude photoshoots with some fantastic models. Further collaborations are being arranged for January. My Minolta film SLR and this partially stripped Ural motorcycle is all I can publish right now.

 

 

 

I take consent and professionalism deadly seriously and will not release anything, unless the model(s) involved are willing for me to do so. Thanks to Brian, who runs the cottage studio http://www.thecottagestudio.co.uk/  for the use of space and lighting equipment. 

 

Proved an ideal opportunity to see what my A6000 would do in a studio setting. Behaved impeccably from start to finish. Traditionally, I’ve run SLRs in the studio and kept CSC systems for street and location shots but the (minor) gamble paid off. Just as well, given my Alpha SLR got the sulks and refused to play nicely with the remote trigger.

I’ve appreciated the cold, harsher weathers, which is ideal for testing lubes, cables, tyres and of course, clothing. Nasty Lube http://nastylube.com/about/  over in Canada, have sent Seven Day Cyclist www.Sevendaycyclist.com their winter lube.

Simple to apply-sparingly, mind. Too much and you’ll get the spatter effect along your chainstay and rear wheel. That aside, there’s no hanging about waiting for it to cure. Simply, drizzle a little into the links of a freshly cleaned chain, wipe away any excess and scoot-off.

Great for commuting and winter generally, since a wintry spell can strip lubricant bare in a matter of rides. So far, it seems cleaner, dare I say less syrupy than some justly popular favourites. Minus figures in the UK are often over exaggerated but it’s dipped to minus 2 and felt decidedly raw, when wind chill’s introduced. 

We’re looking to get some narrow section spiked tyres in but for the time being, the Schwalbe Marathon GT https://www.sevendaycyclist.com/schwalbe-marathon-gt-tyres   and the Univega’s GT365 https://www.sevendaycyclist.com/schwalbe-marathon-gt365-tyre  are hugging slimy roads reassuringly well.       

Spiked, sometimes referred to as “snow” tyres all work to the same basic science. The tread ploughs the white, powdery stuff away, leaving the tungsten carbide spikes to bite into the ice beneath, providing traction.

Progressive acceleration and braking remains imperative but a steady tempo means 17mph is a realistic, dare I say, respectable average speed. Cables are another relatively inexpensive upgrade.

Obviously, testing tends to influence replacement frequency but I’d be inclined to replace standard brake and gear cables twice yearly, seasonally if you’re racing. Rather like stiff greases, sealed systems are a good investment for bikes in hard service.

These typically comprise of a factory lubricated, premium grade stainless steel inner wire, a Teflon coated liner and a heavy duty Kevlar outer. The latter can chomp through paintwork with alarming haste, especially if a layer of grit is allowed to form between them.

Most kits these days use rubberised cuffs to prevent abrasion but carefully cut sections of “helicopter” tape pretty much eliminates this problem. Layered electrical tape will also do, although check more frequently to ensure the outers aren’t making inroads.

While not a sealed system in this sense, I’ve been very impressed with these Jagwire pro road https://www.sevendaycyclist.com/jagwire-pro-road-brake-kit. Simple to fit, compressionless housings, EZ (easy) tunnelling and high quality, PTFE impregnated stainless steel inners deliver impressive modulation, feel and ultimately, stopping prowess!  Right, time I was heading north for another adventure.

 

Boom! And The Hub Bearings Were Gone!

December’s slippery start coincided with the complete and extremely audible implosion of the Univega’s rear M475 hub. Slightly tickly shifting was the only warning that something might be wrong. Thankfully the cheap but relatively cheerful unit held together long enough to nurse it the final five miles home.

Some mouse action and a few emails later secured a complete, machine built wheel turning on a more refined NOS, pre disc Deore hub. Something of a workmanlike groupset, I was also very fond of its STXRC predecessor.

This also boasted decent performance and was inexpensive enough to replace should you come a cropper. 

Anyhow, concluding this eulogy to the dearly departed M475, here’s a strip and overhaul piece in Seven Day Cyclist http://www.sevendaycyclist.com/rub-a-dud-hub. 

Better sealed and arguably built than the M475, general consensus suggests to high quality greases and regular servicing is crucial to their performance and longevity.

I have a love/hate relationship with many things, though limited daylight can be a drain; I remain strangely endeared to winter. Not least since it provides the ideal opportunity to see how greases, lubes, polishes and bike washes cope with the blizzard of slush, slurry, salt and slime.

I’ve tended to err towards daily drivers and winter/trainers rather than specific winter bikes per se. However, a simple, well-dressed, season specific machine can be seriously good fun to ride.

In fact, it’s incredibly liberating because you’re focused on enjoying the ride, rather than being pre-occupied with thoughts of expensive composites and brightwork being under siege.

Regular washing (rinse salty bikes with cold water first, since hot will simply accelerate the caustic component destroying process), cleaning and re lubing save wear, expense and hassle later on.

Another editor has left me to play with a selection of lovely degreasers, some high octane, super flammable but ultra convenient aerosol types, others (including Pedro’s Bye Grease Degreaser) are biodegradable pump spray formulas. Pedro’s, like many other brands are decidedly tight lipped about its composition.

In these circumstances, I err on the side of caution and don disposable inspection gloves, keep recipient bikes/components away from plant/animal life and the contents from entering waterways. Pedro’s recommend it as a general gunk removing potion, not just for transmissions.

Like Fenwicks’ FS1, it’s not a visually lively brew but supposedly breaks down contaminant on contact and dried, ingrained stuff within a minute. Despite the fanfare, I felt a little cheated since it requires some concerted stiff brush agitation before making inroads, even on more basic mineral oil/ISO wet lubes or 5w/30 semi synthetic motor oils.

Nonetheless, it’s otherwise pleasant to use, kind to surfaces and skin alike. Siphoning off 20% and diluted with water, it makes a mild bike wash, dismissing organic and lighter petrochemical gloop with similar panache as other eco-friendly blends.

Finish line wet is something of an institution among wet lubes and in many respects, still cuts it 22 years on. Made from “a blend of high viscosity synthetic oils, water repelling polymers and advanced anti-wear additives”; it works out very cheap and so long as you’re prepared to give side plates, jockey wheels and derailleur cages a weekly cat lick, it doesn’t turn into horrendously gloopy component gobbling mess.

Bikes on tarmac only diets can get away with a trace amount on every link, enough lubrication and corrosion inhibition yet minimises the amount of contaminant collected and ultimately, cleaning frequency. During a mild to moderate winter, expect to replenish with trace amounts on a fortnightly basis. Wet lubes of this ilk also double as nifty grease substitutes on fasteners, cantilever posts etc.    

I’m not sure whether it’s the shortage of daylight, pre Christmas mania, or a combination of both but people’s road craft seems to nosedive the deeper we get into December. 

Just this past week, I’ve had several uncomfortably close encounters, despite being lit up like a Christmas tree on acid. A disturbing number of drivers seem distracted and unable to execute competent overtaking manoeuvres, often passing with inches to spare, then braking hard to avert collision with an oncoming vehicle.

Some have clearly been preoccupied with online shopping apps, others applying makeup but I’ve even noted one van driver playing a banjo while at the wheel!  On that note, I’ll leave you with a few more shots of Tanya Atherton from last week’s studio session.