Showing posts with label Infini Tron. Show all posts
Showing posts with label Infini Tron. Show all posts

Sunday, 30 October 2022

Beacons of Hope?





The leaves are rustling, daylight is fading, and the UK is facing the prospect of blackouts during the darkest, coldest days of winter... Well, my blood will certainly boil, and don’t anyone dare throw a romanticised “It’ll be just like the 70s” line my way. Madison www.madison.co.uk sent us these rear lights to test. We’ve the Infini Metis, the Infini Tron, and The Kryptonite Incite XBR Rear Brake Light.  


What’s interesting about these then...Well, they’re all at the same price point (£34.99) and the Metis and Kryptonite feature “braking” functions. Interestingly, and more accurately, Kryptonite describes theirs as an “acceleration sensor”. Unlike some others, they cite the sensor will trigger the designated LED when it detects speed dropping by 3.58 mph (5.76 Kmh). Otherwise, it’s a 7-mode model with memory and run times, cited as between 10 and 36 hours.  

The Metis has 5- two steady, three flashing-including a daytime running flash. In terms of output, we’re talking between 10 and 80 lumens. I’m particularly intrigued by the Flashing 2, which is 40 lumens and reckoned to manage 28 hours from a full charge. We shall see... 

 

I like daytime running modes, especially on overcast autumn and winter mornings. The Infini Tron pumps out a maximum of 40 lumens but also has a 50-lumen day flash.  

The latter sounds a little tame by some standards- 100 and 150lumens are increasingly common.  


Indeed, they’re brilliant for soup-like conditions but there’s some debate as to whether these are otherwise anti-social. It does, however, enjoy a large surface area and employs a 42 chip and 10 SMD LED, so will be interesting to see how these lights compare in real-world conditions.  


I’m an advocate of always carrying a contingency light on long rides-even with disciplined charging, lights can suddenly power down, or fail. Risks are minimised by proper charging and other, basic care but just as the best-maintained bikes can succumb to a mechanical, the unexpected can strike.  


An integrated lithium-ion or lithium Polymer cell can only withstand so many charge cycles before losing some endurance. To illustrate my point, the Kranx Strix 100 came to my rescue when an excellent Magicshine unexpectedly powered down, meaning I was still obvious to other road users from a good distance and for the remaining 10 extremely dark miles.  


During this point, I also noted the Souma Leather handlebar tape Souma Leather Handlebar Tape | cycling-not-racing (sevendaycyclist.com) had stretched a little, causing it to turn a little baggy just below the brake lever. To be expected after a few thousand miles and easily sorted in five minutes. Unwrap at the tops, just below the hoods. Tension tightly and uniformly while weaving back up. Some fresh electrical tape sealed the deal. The Souma is certainly weathering and wearing well-not that I’d expect any different from a hide of that quality and price point, but reassuring, nonetheless.   

 

One thing, of course, leads to several others. Next thing I knew, I’d stripped the chain and cassette, given the bike a good wash, since I was there. The Green Oil Dry Chain Wax Green Oil Dry Chain Wax | cycling-not-racing (sevendaycyclist.com) for the theoretically more stoical Momum MIC Wax Lube Momum MIC Wax Lube | cycling-not-racing (sevendaycyclist.com) , then of course, I decided the saddle height was a little too lofty, then a fraction too low. The former causes undue and unnecessary strain on the knees, while also hampering efficiency. (Too high, or too low is inefficient and can lead to knee and other joint mischief).  


Then of course, the seat collar sheared-I should stress I had been using the torque wrench, set to the prescribed 5nms. Thankfully, I had a replacement in the small parts drawer, so switched and took this opportunity to blast some spray grease inside the seat tube and apply a light coating to the Kinekt 2.1 Aluminium Suspension Seatpost KINEKT 2.1 SUSPENSION SEAT POST | cycling-not-racing (sevendaycyclist.com) Shim and height checked, I snugged everything down to 5nm and ticked another series of little jobs off my doing list.


I have ordered a couple of 28.6mm BBB, just to keep in stock should another failure strike here, on the fixed gear winter/trainer (Although I have a nice Salsa lip lock somewhere in the spares bin, so will root for that, should need arise.)