Showing posts with label UK car industry. Show all posts
Showing posts with label UK car industry. Show all posts

Saturday 12 June 2021

Shakedown Ride







 

Sunday morning at 6am, I snuck out to the garage, emerging stealthily with the Teenage Dream, just as I did during the summer of ‘91. Minutes later, I was enjoying the responsive zing of the thin-walled steel tubeset. The Knog/Decathlon Frankenputer was clocking a steady 19.6mph and braking, though progressive was refreshingly sharp.  


A big, fly-catching grin followed for the 20-mile loop. Only the BBB mudguards and PDW pump bracket required adjustment, although I noted the Lezyne pump’s tendency to slither downwards, perilously close to the chainring, so the PDW mount had to go-substituted for a Syncros unit holidaying in my Bodge box. This also features a rubber strap for belt n’ braces, vibration cheating security. I also needed to pull the Moon Meteor strap a little tighter around the Salsa Bell lap bars, to prevent its incremental rotation.   


Switch and minor tweaks complete, bike safely away. I turned my attention to Ursula’s drivetrain. Shifting had gone “off”- phantom shifts and hesitancy being the main symptoms. Chain was still in good shape but the derailleur’s inner wire was showing some external signs of fraying, so I replaced this, and the housing, which had developed a very slight kink. 

 

Stripping these, I discovered the inner was a few shifts from expiry and was essentially held together by a PTFE “fatball” or clot, which can develop over time, using the heavier duty maintenance sprays. 


The Rear mech was also sporting impacted waxy colic, which took several helpings of solvent and enthused scrubbing to shift. Note to self... treat the spring, pivots and cables to GT85 and leave the heavier duty PTFE sprays for recessed Allen heads, cleat and locking mechanisms. The chain has been fed a light helping of Weldtite Ceramic Lube WELDTITE CERAMIC LUBE | cycling-not-racing (sevendaycyclist.com), which is defined as an “all weather” formula and in my experience, a decent staple.        

Shifting back on song, I turned my attention to my fixed gear winter trainer. I’d left the Kinekt 2.1 Aluminium suspension seatpostKINEKT 2.1 SUSPENSION SEAT POST | cycling-not-racing (sevendaycyclist.com) in situ since November and thought it was time to remove and re-grease. One thing led to another, and I reverted to Cane Creek’s excellent Thudbuster ST, the G4 in this instance, which features 50mm of travel, easily switched elastomers (press-fit, tool-free). This also cured a slightly annoying creak- the Kinekt seems to require the periodic helping of composite/rubber-friendly grease.  


Not that the Kinekt could ever be described as a pogo stick, the G4’s bob is less obvious but equally effective. It’s also saved 92g, although this wasn’t on my agenda. I’m also pleased to note that ACF50 used in place of grease has done an excellent job of protecting against corrosion.  

Slackening the seat collar bolt, the Kinekt slid out with buttery finesse. Impressive, given the months exposure to wet roads, snow, ice, and frequent sudsy bucket washes. I’ve been defaulting to Green Oil Eco Grease TWELVE MONTH TEST: GREEN OIL ECO GREASE (sevendaycyclist.com), primarily since it’s compatible with all surfaces and loosely on par with the bog-standard PTFE types in the durability stakes.  

Little surprise that the Kinekt Waterproof Saddle Bag KINEKT WATERPROOF SADDLE BAG | cycling-not-racing (sevendaycyclist.com) is an equally good fit. I just needed to pull the straps a little tighter, which is no hardship.     


I’ve been watching the steady implosion of UK industries and it is very clear that stable and skilled jobs are continuing to decline. Honda is leaving Swindon in a matter of weeks and being replaced by a warehouse. Now, work in car plants, at least on the lines is at best semi-skilled. However, its comparatively well paid, warehouse jobs are not.  


Having watched various cornerstones of the British economy disappear (mining, shipbuilding and manufacturing being three that immediately spring to mind). 


Highly skilled people tended to fare much better and could port their skillset to other industries. In the late 90s, Lifelong learning became a buzzword and lifelong learning accounts were a means by which those who had been “left behind” could secure academic and vocational skills/qualifications. It didn’t quite pan out that way.  


However, the concept of lifelong skills development has always been ingrained within me. The pandemic has also turned this up a notch. There are lots of free resources around. 

 

Even if these don’t have an obvious economic benefit, the more skills we can cultivate, the greater our autonomy. Predictably, frame-building courses have often captured my imagination but more recently, a less prescriptive machinists/ paint spraying/similar course has superseded this.