Chain Reactions

Stoicism, the correct kit and sensible preparation are what gets us through the depths of winter. Yet another example of how cycling, is a metaphor for wider life and freelancing, in particular.

By mid January, New Year hype and best intentions seem to flat line. January tends to be a very quiet month, economically, so needs careful management. Secure as much work as possible, during November/early December. Always have a couple of private projects planned. The latter will boost morale, should a lull strike.  

Aside from racking up the miles and testing products, I set myself the target of finishing some short fiction. Deadline, end of January. A different project to reignite creative sparks and crucially, distinguish 2020, from 2019 etc. 

I'm nearly done with the first draft. Once that's finished, I will leave it marinating for a few days, whereupon the baggier bits and minor holes will be obvious.

Elsewhere, the Sugru didn't completely cure the Bandit bracket's minor rattle. Some intermittent, low-level chatter remained, when tackling washboard tarmac.  Rides usually boost mood and inspiration. At 23mph round a sweeping bend....Zip Ties!

I always carry a couple with me, but wanting to keep those for emergencies, such urges were arrested until I returned home. Funny how these little victories can bring so much joy.  

Staying with tooling a moment, there's a lot to be said for custom, machine specific tool kits. That said; some generic tooling is always sensible. I always carry a comprehensive multi-tool, patch kit and spare chain links. 

I even carry a few 9 and 10  speed chain links along with a few for the fixed. This way, I can help someone else, if they're in a jam. A small dropper bottle of pour n' go lube, on longer rides, just in case. 

The drier, cooler spell has presented an opportunity to assess the Juice Lubes Ceramic Juice. This version seems to attract less grime than its predecessor, while still offering decent lubrication. I decided to check my fixed gear winter/trainer's chain. 

Plenty of Viking Juice still present. While scrutinising the chain, I discovered the Halo Fix-G Track Hub https://www.sevendaycyclist.com/halo-fixed  bearings were slightly loose. Nothing serious but nipped snug, there and then, with a 15mm wrench. One thing led to another...I stripped the Genetic Tibia Track Crankset's https://www.sevendaycyclist.com/genetic-tibia-track-cranks-ring bolts, which freed with reassuring ease. The Mighty UN55 bottom bracket remains in rude health, although I always keep one handy, in case the grumbles strike.

Oh hell, since I'm here....Bike washed, chain stripped and fed four helpings of Juice Lubes Chain wax. Not the most obvious choice, but I was curious to see how it copes in colder weather.  

Unlike summer (where wax melts into the chain and where relevant, cassette), theoretically, wax will simply flake off, taking the contaminant while leaving a thin lubricant layer, behind. 

From here, simply top-up. No cleaning, no drama. At least that was the plan. Then along came Storm Brendan. 50mph crosswinds and plenty of standing water. https://www.facebook.com/sevenday.cyclist/videos/vb.100008574185706/2220873604875091/?type=2&theater&notif_t=video_processed&notif_id=1579097264815732

Lube literally licked clean in 58 miles. I've gone for White Lightning Wet Ride Extreme Conditions Heavy Lube for now. I'll probably revert to the Weldtite TF2 Performance All Weather Lubricant https://www.sevendaycyclist.com/weldtite-tf2-performance-all-weathe or possibly Rock n' Roll Extreme LV https://www.sevendaycyclist.com/rock-n-roll-extreme-lv-chain-lube?

fbclid=IwAR0PMV6Wpug4USjedaGu2FuqnR6ShaOEEQm_AvBNs1eYGdJq2XGMKqgkIIE when the chain's looking thirsty. 

Part of me is temped to brew my own wax-based chain lubes, using a mix of candle wax, turpentine and Xylene. Watch this space. For the moment, think I'll run through my stock of "off the shelf" blends. 

I've switched the D-Riser 16 bars https://www.sevendaycyclist.com/genetic-d-riser-bars  for their D-Riser 4 siblings. The latter have been developed for road biased riders, who found the 16 degree flare excessive. However, it still offers 17mm to the overall width, so theoretically our 440mm are in fact 457mm. 

Something to bear in mind, if you commute/ride in congested traffic. The Driser16 remain my favourite riser-type drop bars for a road/cyclo cross bike. 70mm reach would be fine for my Univega. However, 125mm drop way too deep. I won't be switching its Soma Condor https://www.sevendaycyclist.com/soma

 I also needed to snug the Univega's guards https://www.sevendaycyclist.com/sks-blumels-shiny-mudguards and Gusset Uni-head by a quarter turn.  I've also discovered the rear guard's serrated section, is designed to be easily removed, should the guard foul, or impair a front mech. A moot point with my Univega, and other 1x drive trains, but good to know.  

Back to the Bodge Box

Well, after all that fuss n’ fanfare, the K-Edge & Geonaute polycarbonate shell combo proved decidedly disappointing. Specifically, persistent low-level road vibrations induced perpetual and distinctly infuriating slippage. Clearly struck by a Eureka moment, I returned from an early evening’s backwater blast and began rifling through a series of clear Perspex boxes.

By this point, frustration was such that I was thinking of helmet mounting when ten minutes later-Bingo! The Wingman’s resin bar bracket materialised, proving fully compatible with case and oversized bulge diameters, though I had to forgo the standard bolt in favour of a super stocky UV resistant zip-tie.

Successive dry runs along the lane confirmed rock solid, blur-free tenure, inducing a tremendous sense of achievement (not to mention uncharacteristically large grin).

Knog’s Qudos action video light materialised at the tail end of last week, which is similarly pleasing. Coming from a design company, I wasn’t surprised (though suitably impressed) by the sleek metal box and foam packaging which keeps everything safe and secure in storage/transit. Foraging inside revealed a beautifully executed light, slightly reminiscent of their Blinder Road2 lamp fed a steroid diet.

Ours was anodised black, though silver is no less alluring and will arguably age more gracefully. Now, somewhat sensibly, the mounting bracket is a Go-Pro pattern, so I’d anticipated some compatibility challenges with the G-Eye.

First and foremost insufficient spacing meant the two were literally butting heads, especially with the cameras’ polycarbonate housing in situ. After much head scratching/trial n’ error, I overcame this obstacle by resurrecting the Wingman and K-Edge brackets before reintroducing said gizmos as separates.

Knog also include a cold shoe tripod mount designed compatible with DSLR convergence work (another area of image making that has slowly but surely pricked my consciousness) in mind. Indeed, the Qudos is another example of the Australian marque’s consistently improving build quality.

Aluminium is an obvious choice for headlamp housings-rugged and lightweight it also displaces heat more efficiently than cheaper resins, so those three Cree diodes and circuitry stand a sporting chance of enjoying old age. Its’ also water resistant to 40 metres-130ft or so, giving potential for scuba and other submergible action. 

Now, 400lumens sounds impressive and in bike lighting terms is good enough for sprightly canters in semi-rural contexts.However, despite the Sports Action tag; I have suspicions this will require support from an uber lumen handlebar amp for capturing moonlit blasts, let alone trail antics. 

Those looking for more subtle illumination will be pleased to note its 70 lumen setting is claimed to sip the fully loaded 1,000 m AH lithium polymer cell for four hours, whereas the former is reckoned good for 40odd minutes.

That said; batteries are available separately and I’m thinking there’s some scope for emergency bike lighting, should your mains system flake out in sticksville.  Well, I’ll leave it here for now and will report back once a bigger micro SD card arrives…

The staying prowess of Btwin Teflon lube continues to astound me. We cruised through the 1100mile barrier on a single application and though about due replenishment, my fixer’s stainless steel chain still sported a protective film and minimal contaminant. 

Let’s see what the season of falling leaves, rich colours and damper roads reveals. Talking of which; I must crawl beneath the KA and give its underside and sills a routine basting of home brewed corrosion inhibitor before too long.