Hubs & Helping Hands

 

Madison sent me this Shimano Nexus DH UR 700 3D Dynohub, which at 544g (including skewer) is 68g lighter than the venerable Alfine but 145g heavier than the Shutter Precision SD8 SHUTTER PRECISION SD8 HUB DYNAMO | cycling-not-racing (sevendaycyclist.com) and noticeably weightier than the SL9. Experience suggests, used year-round I will return between 20,000 and 25,000miles (about 40233.6 km) from the Shutter Precision hubs before their bearings get the grumbles and they need returning to the factory.  

They certainly won’t owe anything by this point and chances are, running a rim brake, rim sidewalls may also be due their pensions. However, disc brakes extend the life of rim sidewalls considerably and the need to tear down a wheel to service the hub is more frustrating.  

Fond of the SP units, I’m wondering if the contact, rather than labyrinth seals used in Shimano units are the culprits. I left it and a 700c Ryde Sputnik rim with Mick Madgett. The Sputnik is a tough touring rim, which may be overkill for my needs in many regards, I prefer a little overbuild, especially on bikes in daily, winter or gravel service.   

This Shimano Nexus follows the contemporary 6v3watt spec. An aluminium coil structure saves weight. Cup and cone bearing races are treated with Borozon for mirror finished bearing races. A notable improvement over the loveable Alfine and Shutter Precision are the labyrinth seals and internal grease seals.  

These better lock out the elements and the grease in. The nicely machined aluminium hub shell continues this narrative and has a double anodised finish that, if the UN71 is any gauge, should keep its looks and the shell free of corrosion for many years. Provided of course, you periodically give it a good clean, especially during winter where road salt can even chomp through anodising. I’ve whipped a WTB Nano aboard and will get some miles in aboard Denise and will probably switch to my fixed gear winter trainer, as the days become darker and wetter.    

I’m still being sent some nice summer kit. Most notably, this Madison Roam Men’s Short Sleeve Jersey. My experience of the Roam range is generally very positive. It’s what I’d call a crossover range, making easy transition between road, touring and gravel cum trail duties. Their cargo bib shortsMadison Roam Men's Cargo Bib Shorts | cycling-not-racing (sevendaycyclist.com), gloves Madison Roam Gloves | cycling-not-racing (sevendaycyclist.com) and 2.5layer jacketMadison Roam 2.5 Layer Waterproof Jacket | cycling-not-racing (sevendaycyclist.com)  . 

The jersey follows this narrative. Available in moss green, or lake blue, there are three large open top rear pockets, a zippered end terrace for cash, keys and other small valuables coupled with a mesh “dump” pocket, which I’m told is for bunging rogue bits n’ bobs mid ride. Made from 85%polyester 15% polyamide it also features a mesh channel between the shoulder blades to encourage rapid moisture transfer. A decent size zipper tag continues the easy climate control narrative, silicone zippers ensure it doesn’t gather and ride up-especially hunkered down on the drops with bigger loads en tow.  

Oxford has also sent me their Mint Assembly Grease. It’s actually a multi-purpose formula for slow speed applications, headset, hub and other bearings being obvious candidates. However, it's also safe to apply on threads and stanchions. I wasn’t surprised to learn it's carbon safe, although obviously, employ gripper pastes, never grease carbon components.  

There is also a lithium component for durability. I’m not the biggest fan of old-fashioned lithium greases, since they’re not kind to modern composites and rubberised components- seals and suspension being prime examples. Now, the Minty Assembly Grease isn’t a lithium prep but does have a lithium part for durability. With autumn and winter around the corner, it will be interesting to see how well it fares against washout.  

Staying with the washing theme, Denise was filthy after a week or so spent traversing wet, mucky lanes. This impacted grime coincided with the arrival of this Green Oil Massive Brush. It is HUGE and features a wooden handle and biodegradable bristle plot.  Time for a sudsy bucket deep clean...  

Unlike their Standard Bike Brush (which is best for wheels, spokes, cranks and pedals) the bristles are designed for tackling the entire bike. Formative impressions suggest the bristles are soft enough for painted, plated and lacquered surfaces. I’m certainly warming to it, but as usual intensive workshop use will reveal more. I was pleasantly surprised to find Denise’s KMC chain still hovering below the .5 mark. I may well get another month before it collects its pension.     

Right, I’ll close here with my review of the Magicshine EVO1700 Underneath Mounted Bike Light Magicshine Evo 1700 Underneath Light | cycling-not-racing (sevendaycyclist.com) 

 

Gearing Up (& Fresh Grease) for a New Season

 

Ursula’s drivetrain purged with the NZero Bike DegreaserNZero Bike Degreaser | cycling-not-racing (sevendaycyclist.com), new chain and other parts set aside, I’m awaiting a 100g (about 3.53 oz) tub of Oxford Mint Assembly grease ahead of the rebuild. Oxford describe it as “a high-performance red grease with pressure additives to provide excellent lubrication and dirt repellent properties”. The base is solvent refined mineral oil with a lithium complex thickener.   

In this instance, Oxford recommends it for low-speed applications, such as bicycle bearings and pivot points, which need low friction, while being highly resistant to the elements.  Synthetic blends are best for modern bikes where carbon and other composites are typical. Traditional lithium pastes are very stoical on old school cup and cone hubs, unsealed headsets etc.  

However, they will do very nasty things to rubberised components, including seals and encourage galvanic corrosion (where ferrous and non-ferrous components, such as aluminium alloy seat posts in steel frames get chemically welded to their hosts). If you’re only going to have one blend on the shelf, I’d go synthetic. Purpose specific blends are the way forward if you’re looking for the last word in performance.  

Assembly greases for contact points, bearing grease for hubs, headsets and pivot points. Ultra-low friction blends, such as Peaty’s Speed Grease PEATY'S SPEED GREASE | cycling-not-racing (sevendaycyclist.com) are particularly good for competition riding, or summer bikes. Contexts where you really want to blast along and get every last benefit from that top drawer groupset.  

The speed Grease has also proven surprisingly stoical, clinging on through winter, although I’d still be inclined to strip and replenish every six months or so. Ok, so the darker months aren’t here just yet, but preparing for them makings riding more fun and breakdowns infrequent. Thus far, the Shutter Precision SL9 hub still sems in good health but I’m contemplating taking another direction before it does.  

Experience suggests it’s the sealed bearings that get the grumbles given 20,000miles or so and I’m edging towards that. The most obvious, dare I say cost effective solution is to have the SL9HALO EVURA & SHUTTER PRECISION SL9 DYNOHUB BUILD (sevendaycyclist.com) overhauled via Ison Distribution (their UK Importer) and have the silver anodised Shimano unit presently in hibernation, built into the existing Halo rim and have that as a dedicated front wheel for Denise...Waste not, want not, use what you got and er, rationalise the spares bin.    

Talking of which, I was eager to find a longer shim for Ursula’s Kinekt 2.1 seat postKINEKT 2.1 SUSPENSION SEAT POST | cycling-not-racing (sevendaycyclist.com), since a longer unit should offer greater support to the post and ultimately, prove kinder to the frame. A cursory rummage through my small parts bin confirmed I had a Cane Creek unit, so another thing off my mental list and though always a worthy investment, I didn’t want to spend money unnecessarily, since insignificant amounts can quickly add up.   

Days are slipping towards autumn, which as I’ve said many times, remains a favourite season but also a reminder of how precious time is.  

Once the preserve of aspiration and optimism (embarking on a university degree and moving to London’s East End, meeting a woman who would ultimately come with me through thick n’ thin, hell and high water-seemingly unlimited horizons) The last fifteen years, autumn has been a reminder of how much I need to achieve. Never put off tomorrow what can be done today.  

This in mind, I’ve switched to racking up the miles wearing the Madison Flux mitts. They’re a little on the snug side, so I’d recommend paying particular, not cursory attention to their sizing chart. That aside, they’re proving competent, comfortable options-on and indeed, off road.        

I’ve also been contemplating cables ahead of Ursula’s rebuild and decided that, given we’re creeping toward the darker, wetter months I’d go for a sealed system, at least for the brakes. Extra UK has sent me Jagwire’s Road Elite. In common with other “sealed” systems, it employs a continuous, factory lubricated liner.  

This runs from the lever to calliper offers much greater protection from grit, grime and other performance robbing contaminant. The inner wires are also polymer coated for. However, these 2.4mm liners may not be universally compatible with frames and/or components. We shall see...  I’ll leave you with my review of Ergon SR All Road Core Comp Saddle Ergon SR All Road Core Comp Saddle Men | cycling-not-racing (sevendaycyclist.com)