Showing posts with label On-one Ilpompino Mk2. Show all posts
Showing posts with label On-one Ilpompino Mk2. Show all posts

Saturday 25 June 2016

Hub Deep













It’s not what but who you know…Word of mouth has seen Seven Day Cyclist invited to attend the upcoming Adventure travel film festival www.adventuretravelfilmfestival.com/uk-festival , which is a great opportunity to get inspired.

Traditionally this attracted 4 wheel drive and motorcycle explorers but we’re told cycling audiences are also beginning to gravitate; hence our attendance. On subject of touring/exploration, Steve Dyster has found plenty of decaying soviet era relics; especially in Germany’s easterly towns and villages.

At this point, I felt an acute sense of excitement and before he moved back to the west, begged him for some photographic evidence of this delightful derelict industrial porn...Hopefully I’ll be able to share this very soon-he’s due back in the next few days.

Several hundred miles in and the Ilpompino’s FSA headset bearings remain well behaved, although its replacement arrived and will be substituted at a convenient moment should the dreaded slop rear its ugly head again.

Talking of which, I returned from a weekend’s social photography in Bedford and decided summer’s decidedly soggy official start should coincide with the introduction of WD40 dry chain lube.

For the past few weeks’ I’ve fed the fixers Green Oil’s chain wax, which is a super clean brew with friction in snake’s testicle territory. While the formulas are very different, one derived from plant based ethanol and similarly natural (though extremely flammable!) components; the other employing old school PTFE.

Both are very runny; so deploy in well-ventilated areas- away from chain smoking neighbours or other sources of ignition and keep some old rag/kitchen towel hovering beneath to capture the inevitable overspill.

Green oil likes a double up and while directions suggest it’ll cure in around six minutes, twenty seems optimum, even on very warm, arid days. Technically; as is the case with many PTFE fortified blends, WD40’s follows the drizzle on, dismiss excess and scoot-off narrative.

In practice, leaving it twenty minutes or so, improves staying prowess, especially in slightly changeable conditions. This, coupled with the fact that its 100ml bottle slips nicely into most jersey pockets/saddlebags means it’s convenient for roadside top-ups too

First impressions along waterlogged lanes suggest they’re on the right lines when it comes to staying prowess. I’ve avoided roads which have become virtually impassable rivers; claiming late model SUVs, vans and smaller vehicles. 

Nonetheless, some sections were deep enough to engulf said fixer’s stainless steel chain and lap at its sealed hubs. We’re only seventy miles in so far, which in many respects is nothing, although I’ve often found myself topping up those lightweight ISO/PTFE formulas around this point into a similarly wet spell. The next three hundred miles could prove very interesting, or highly predictable... 

Elsewhere; I’ve been busy in the midlands; succumbing to a very nasty bout of food poisoning; demanding a couple of stops at Northampton and Toddington motorway services. In any case, the M1 was pedestrian due to a series of equally visceral collisions, one involving a Truck and several cars.

My series of Children’s stories, characters and themes continue to develop. Once we’ve agreed the second draft of our prequel’s narrative, Michael J Murphy will commence the initial sketches for approval, before bringing them to life digitally.

The Free parable T2 trailer continues to impress me. Its long sleek profile is reminiscent of a spine and when combined with its waterproof dry sack, will manage a competitive 30kilos plus of kit without feeling overburdened.

Being 6061 aluminium, it’s a little lighter than the Yak patterns, though the same rules apply-plan your gear changes carefully, before reaching junctions or climbs and, in my case, over- estimate your turning circle. That said; it tracks more accurately behind and coupled with a slender profile, makes negotiating tighter gaps-traffic, alleyways or indeed, forest trails.

The “spinal” design and plastic mudguard also means annoying chatter is a moot point when gliding over inclement/washboard tarmac. OEM wheels tend to be another afterthought. While hardly exotic, the T2’s 12 inch rolls surprisingly efficiently and while there’s an argument in favour of being able to strip and service/rebuild a basic cup and cone hub in the back of beyond.

In practice the sealed “fit n’ forget” units turn very smoothly and shouldn’t require any intervention in the longer term.  There are a few minor limitations with the design, mind. Those, myself included; who are less orderly in their loading, may find models with broader platforms more convenient for everyday bung in and go missions. Complete review coming soon in Seven Day Cyclist www.sevendaycyclist.com

Saturday 18 June 2016

Lubes, Trailers & Fixed Ideas




These samples from WD40 (parent company of the GT85 brand) and Free Parable T2 trailer have arrived on the Seven Day Cyclist test bench. First up we received those iconic red tins of PTFE infused water displacer that I’ve used since 1989. Excellent for sticky mechanisms, reluctant cables and as a frame flush/ masking agent for electroplate. Their degreaser; wet, dry and all conditions lubes arrived a few days later.

In many respects, the T2 is very different from the Yak pattern, although the coupling and swing arm system will be very familiar. High standards of manufacture run throughout. From the neat, uniform welds and bolt-on mono blade. Trailer wheels tend to be something of an afterthought. 

Though anything but exotic, the T2’s is a notch better than many OEM examples I’ve come across, turning on sealed fit n’ forget cartridge bearings.   
Having enjoyed a relatively restful few months, I’ve roused my cyclo ‘cross inspired fixer from its slumber. Back in 2005, it was acquired as a crate-fresh, stock MKII Ilpompino. 

These days, only the rear hoop and headset remain of the original build.
Traditionally, it has followed the fixed gear winter trainer narrative; full-length guards, rack, 28-32mm 60tpi tyres etc. However, last years’ conversion to a new, disc specific front end, two-tone powder coat makeover and a flurry of test kit has seen its incremental evolution. I’d call it a ‘cross/adventure hybrid; detractors would shout Frankenbike...

True; an 81 inch gear is too tall for anything sans asphalt and the rear triangle will only just entertain 32mm rubber. Gone are the Bontrager rack and full length chrome plastics in favour of these lovely 35mm Clement X’plor and Crud Racer clip-ons. Time ATAC4 have replaced the XLC dual sided Ritchey pattern SPDs and some minor, yet disturbing creaks were traced to its drive side, square taper crank bolt.

With an operating pressure between 55 and 90psi; firm centre ridge and soft diamond knobblies, the Clement are essentially mixed terrain tyres designed for unmade/roads and light trail fun.

The words dual-purpose are laden with negative connotations thanks to the awful OEM types that swept in with the 80’s mountain bike boom. These are worlds apart. Ours are the 120tpi versions; they’re also available in a stockier 60tpi casing, which would be my default for winter or weekend touring.

As you’d expect; rolling resistance is greater than a 120tpi 35mm slick, such as Vittoria Voyager hyper or Schwalbe Kojak. Similarly, they don’t slice through soft gloop like a thoroughbred ‘cross knobbly. Nonetheless, they’re responsive and keeping them rolling at 20odd mph is pretty effortless.

Cross-specific rubber when pushed hard on asphalt will squirm. I’ve been scorching along 1 in 7s at 30mph plus and to date; they’ve never missed a beat-rain or shine.
Formative impressions are of an extremely competent choice for riders looking to exploit their cross or gravel bike’s dual personality without needing to swap tyres.   

The same goes for the Crud guards. Aimed primarily at XC mountain bike audiences; these fit in the proverbial minute and have presented a simpler solution up front-especially since I’m using a headlock system in place of the SFN.

The Ilpompino’s mono-stay rear triangle seemed an ideal mounting point, maximising clearance while minimising air resistance-at least that’s my rationale’. On the subject of preload; a game of musical spacers addressed some minor slop in said machine’s OEM, cheap as chips; yet equally cheery FSA orbit.

Despite turning on bargain basement caged balls and slogging through some pretty harsh winters, its’ exceeded my expectations. Good quality grease, regular servicing, full-length guards certainly help.

However, I suspect we’re nearing the end of its useful life and I’ve a cartridge unit waiting in the wings... Elsewhere, good progress is being made with my children’s story collaboration. We’re agreeing new plotlines and Michael J Murphy is working on the visuals.