Write Ups & Write Offs

Austin Vince Interview now live on Seven Day Cyclist http://www.sevendaycyclist.com/austin-vince-world-view , replacement forks and headset behaving impeccably, I’ve been able to sit back and enjoy some serious fun on the Ilpompino. However, despite recent battery replenishments, its’ otherwise seriously cheerful, Revolution Velocity 20 function bar mounted computer has been delivering some frustratingly erratic readings.

Close proximity to pylons, electricity substations and other sources of current were once notorious for sending wireless units haywire. Some pros still prefer wired systems for absolute accuracy. Standalone heart rate monitors and more recently, GPS based tech have also been linked to this kind of disruption.

These were non issues with both Geonaute escape series action cameras and their remote triggers. Thoughts turned to the Tom Tom Bandit but leaving it at home for a few rides ruled this out.

Given the Velocity was a tester and Edinburgh Bicycle Cooperative are now offering them for £10; after eighteen months’ faithful service; a quick rummage in my gizmo box unearthed this fuchsia/pink Knog Nerd. Fresh batteries, lick of Vaseline on the battery contacts and a quick bit of recalibration later-job done.  

Elsewhere, new, heavy duty tubeless rim tape coupled with a fresh delivery of tubes cured the Holdsworth’s butyl munching tendencies. Timely then since a set of 26mm Bontrager R3 TLR (Tubless Ready) tyres had been sent my way...

There is little doubt in my mind that tubeless will become the dominant system, although rather akin to tubulars, I don’t expect tubes to become obsolete. Tubeless tyres have been around for a good decade or so and have several advantages.

Puncture resistance, especially at lower pressures explains why they caught on with mountain bike and ‘cross audiences. Additional traction through the gloop makes all the difference.

The R3 also employ a “lightweight sub tread” material for additional puncture resistance, which is welcomed, whether you’ve gone for wholesale conversion or want a slower, tubes first transition. There’s a definite knack to getting them aboard-some rims are easier than others but having nearly succumbed to a full blown, lever hurling meltdown; I’d recommend watching the Bontrager you tube tutorial first. https://www.youtube.com/watch?v=PR6e065lFn0

Operating pressures are decidedly modest by traditional wire on/tubular standards, although run at 105psi; they’re responsive with leach-like cornering prowess through saturated S bends, yet deliver a very compliant ride over washboard surfaces. Punctures have been a moot point to date and I’m fast forming the opinion these are excellent choices for for winter/trainers and other situations where you want to stick with one set of tyres year round.

While out in the Ka, I found myself following the TFB (Tadworth Fat boys) team. http://www.tadworthfatboys.co.uk/tadworth-fat-boys-social-cycle-group/

Having overtaken them a couple of miles earlier, I drew into a clearing and took a chance on my CSC’s lithium ion battery. Luckily, 40% charge remained and the 50-200 5.6 lens was already fitted; so I ran off a few shots from a comfortable distance.

Returning home, I decided to give the Univega a good clean, degrease the drivetrain and re-lube. Click, grumble, whirr...Rear wheel bearings fine, cassette snug, freehub mechanism...On the way out.

This is another loyal, wallet friendly servant that doesn’t owe me anything. Detractors suggest it can’t cope with poor weather, let alone trail duties. Granted, it’s a very simple cup n’ cone model, one up from Alivio with similarly basic weather seals; nonetheless with basic care, mine has racked up 20,000 miles through snow and high water.

Machine built hoop with higher quality Deore hub can be had for £60 from reputable suppliers, so I have a very clear write-off figure in mind. Short on time; I got in touch with Alan at Riverside Cycle Centre, who agreed to do a strip n’ service on Tuesday, since I was in his neck of the woods. That’s about it for this week, off to familiarise myself with this remote trigger for Sony SLR/CSC systems...

The Emperor's New Forks

Plenty of excitement-of the right and wrong sort this past fortnight; continued progress with the children’s stories, a couple of hours spent interviewing Austin Vince (www.austinvince.com) leading up to his adventure travel film festival on 12-14^th August. http://www.adventuretravelfilmfestival.com/

Then along came tyres that would not mount, mechs that swung too far and of course; a “Forking hell! My blades/steerer are divorcing!!!” drama.

Thankfully; this was all sorted with a call to upgrade bikes www.upgradebikes.co.uk. Two minutes later, Rory sorted me a set of Kinesis DC37 at a very compassionate price. Two days later, they arrived at my door suitably boxed to fox the notorious parcel destroyers, along with a brand-spanking new hacksaw.

I knew I had a packet fresh, replacement blade “somewhere” but rather than wasting time, simply ordered another saw, specifically for guillotining steerer tubes. Some will argue this is unnecessary expense; most of us replace forks every-so-often.

Maybe so, but £6 pales into insignificance compared to a badly cut tube, or operator injury. Keeping two sets of wire snips is also good practice; one for everyday jobs-cutting zip ties, plastic housing, wire fencing to length etc and another specifically for inner wires-they’ll repay their investment countless times over.

Back to the forks; these are a keenly priced and relatively lightweight composite set with an alloy steerer, disc mount and 45 degree rake. Check out a full review in Seven Day Cyclist. http://www.sevendaycyclist.com/kinesis-dc37-disc-fork

Kinesis frames and forks are well made and this one seems particularly good for a budget fork; countering the perpetuating myth that composites go floppy with age, or should be arbitrarily replaced at specific intervals. Personally, I’m inclined to inspect regularly and, in the event of a serious tumble, consult a specialist and make an informed decision.

Bottom line, I’ll pension off anything dubious. The cost implications of new teeth, time off work, or the prospect of having shards of composite plucked from my derriere by an overworked and underpaid A&E nurse far exceeds that of a replacement post/handlebar/fork.

I was tempted to plump for their Crosslight. These are a slightly quirky, industrial looking 6061 set, which I’ve used to good effect on a cross inspired mtb mongrel. There's  only 70g separating them from the Dc37. 

However, while I’d describe the Crosslight as direct, rather than harsh; carbon blades translate into a more compliant ride. Ideal opportunity for headset replacement-another FSA, from the comfort of one’s kitchen, naturally. 

Talking of comfort, I am largely a MAMIL (Middle aged man in Lycra) for point to point blasts; though I’ve always had a soft spot for “messenger” longs, which are extremely practical for spirited riding, yet more suave, dare we say, socially appropriate sans bike.

Price is usually a good indicator; although I have three particular favourites are at each end of the spectrum (£25-£75). Given this backdrop, I was decidedly disappointed by another top drawer set commanding the lion’s share of £100. 

No denying their appeal sans saddle but the cut saw them ascending my thighs faster than an 80’s Columbian climber. Could just be a poor liner/short combo, so I’ll persevere for another 100miles or so before passing comment proper.

Elsewhere, I’d been eager to get my sweaty little mitts on tom-tom’s bandit action cam for some time, attracted by its spec and promise of user-friendly editing.

Suggestion that action cams, regardless of quality are serious film-making tools is misinformed. Limited focal length and sound recording quality are the most obvious limiters but they are a useful way of recording the highs n’ lows of a ride, broadcasting short, first-look promotional pieces on social media channels.

Convergence; crudely the adoption of SLR cameras for film-making and we can now edit footage without having access to professional editing suites. However, as Austin Vince pointed out during our interview; the grammar of television-the way in which stories are told remains unchanged and must be mastered first.

I’ve seen several “Uncle Bobs” produce abysmal wedding footage using completely stock, entry Level DSLRS in movie mode. Undeterred, I’m going to learn this language at my own pace, while having some uncomplicated fun with the Bandit…

Hub Deep

It’s not what but who you know…Word of mouth has seen Seven Day Cyclist invited to attend the upcoming Adventure travel film festival www.adventuretravelfilmfestival.com/uk-festival , which is a great opportunity to get inspired.

Traditionally this attracted 4 wheel drive and motorcycle explorers but we’re told cycling audiences are also beginning to gravitate; hence our attendance. On subject of touring/exploration, Steve Dyster has found plenty of decaying soviet era relics; especially in Germany’s easterly towns and villages.

At this point, I felt an acute sense of excitement and before he moved back to the west, begged him for some photographic evidence of this delightful derelict industrial porn...Hopefully I’ll be able to share this very soon-he’s due back in the next few days.

Several hundred miles in and the Ilpompino’s FSA headset bearings remain well behaved, although its replacement arrived and will be substituted at a convenient moment should the dreaded slop rear its ugly head again.

Talking of which, I returned from a weekend’s social photography in Bedford and decided summer’s decidedly soggy official start should coincide with the introduction of WD40 dry chain lube.

For the past few weeks’ I’ve fed the fixers Green Oil’s chain wax, which is a super clean brew with friction in snake’s testicle territory. While the formulas are very different, one derived from plant based ethanol and similarly natural (though extremely flammable!) components; the other employing old school PTFE.

Both are very runny; so deploy in well-ventilated areas- away from chain smoking neighbours or other sources of ignition and keep some old rag/kitchen towel hovering beneath to capture the inevitable overspill.

Green oil likes a double up and while directions suggest it’ll cure in around six minutes, twenty seems optimum, even on very warm, arid days. Technically; as is the case with many PTFE fortified blends, WD40’s follows the drizzle on, dismiss excess and scoot-off narrative.

In practice, leaving it twenty minutes or so, improves staying prowess, especially in slightly changeable conditions. This, coupled with the fact that its 100ml bottle slips nicely into most jersey pockets/saddlebags means it’s convenient for roadside top-ups too

First impressions along waterlogged lanes suggest they’re on the right lines when it comes to staying prowess. I’ve avoided roads which have become virtually impassable rivers; claiming late model SUVs, vans and smaller vehicles. 

Nonetheless, some sections were deep enough to engulf said fixer’s stainless steel chain and lap at its sealed hubs. We’re only seventy miles in so far, which in many respects is nothing, although I’ve often found myself topping up those lightweight ISO/PTFE formulas around this point into a similarly wet spell. The next three hundred miles could prove very interesting, or highly predictable... 

Elsewhere; I’ve been busy in the midlands; succumbing to a very nasty bout of food poisoning; demanding a couple of stops at Northampton and Toddington motorway services. In any case, the M1 was pedestrian due to a series of equally visceral collisions, one involving a Truck and several cars.

My series of Children’s stories, characters and themes continue to develop. Once we’ve agreed the second draft of our prequel’s narrative, Michael J Murphy will commence the initial sketches for approval, before bringing them to life digitally.

The Free parable T2 trailer continues to impress me. Its long sleek profile is reminiscent of a spine and when combined with its waterproof dry sack, will manage a competitive 30kilos plus of kit without feeling overburdened.

Being 6061 aluminium, it’s a little lighter than the Yak patterns, though the same rules apply-plan your gear changes carefully, before reaching junctions or climbs and, in my case, over- estimate your turning circle. That said; it tracks more accurately behind and coupled with a slender profile, makes negotiating tighter gaps-traffic, alleyways or indeed, forest trails.

The “spinal” design and plastic mudguard also means annoying chatter is a moot point when gliding over inclement/washboard tarmac. OEM wheels tend to be another afterthought. While hardly exotic, the T2’s 12 inch rolls surprisingly efficiently and while there’s an argument in favour of being able to strip and service/rebuild a basic cup and cone hub in the back of beyond.

In practice the sealed “fit n’ forget” units turn very smoothly and shouldn’t require any intervention in the longer term.  There are a few minor limitations with the design, mind. Those, myself included; who are less orderly in their loading, may find models with broader platforms more convenient for everyday bung in and go missions. Complete review coming soon in Seven Day Cyclist www.sevendaycyclist.com