Waxing Lyrical

 The Pure Dry Lube is showing the characteristics of a traditional, petrochemical formula- the sort made from refined paraffin wax and solvent. It’s turned molten and some has migrated to the chain’s side plates, though not the cassette, which surprises me.  

Still plenty on the rollers, 225 miles in and I was expecting to purge a gungy looking beard that had accumulated along the side plates, jockey wheels etc. I was pleasantly surprised to discover it has scabbed off, during subsequent rides.   

Wax formulas, without a PTFE, or similar additives mean chains tend to succumb to light, filmy corrosion, following wet rides. Another reason why I don’t go this route with cleat hardware and others prone to getting blasted with dodgy water.  True to type, the Pure has done just that. Not an issue with the more sophisticated dry blends.  

While they will generally run cleanly, waxes  require a more disciplined approach to drivetrain cleanliness, first time round, hence the argument these have more benefit to racers-time triallists and mountain bikers (during the summer months), rather than commuters.  

One I concur with in some respects. Arguably, working bikes should be ready n’ reliable, with minimal faff. Wet lubes are an obvious choice and will certainly go the distance, but as I’ve said many times before, the side plates will need wiping regularly. Otherwise, accumulated grit/grime turning into a grinding paste, chomping through your bike’s drivetrain.  

If you’re pressed for time, one of the pour n’ go sort, such as Finish Line 1-Step Cleaner and Lubricant https://www.sevendaycyclist.com/finish-lineMight be an easier proposition, even if these require more frequent reapplication.  Once the existing Pure dry lube is spent (coinciding with the chain, I suspect) I may well revert to the low-friction Zefal Pro-Dry Lube.https://www.sevendaycyclist.com/zefal-pro-dry-lube This incidentally appears fully compatible with the Pro Gold Prop Link Chain Lube https://www.sevendaycyclist.com/pro-gold-pro-link-chain-lube if my fixed gear winter trainer’s chain is anything to go by, several weeks down the line.   

Talking of wax, I’ve treated the Univega to another high-quality waxing. Muc-Off Miricle Shine polish, this time around. It’s made using Fluro Polymer Technology and Carnauba wax. The latter is also found in high-quality furniture polish, cosmetics, and even speed boat hulls. Silicone oils are apparently employed to enhance ease of application and, it’s very quick and easy to apply.  

One coat is sufficient but if like me, you like to double up at key areas (bottom bracket shells, down tube, chainstays etc), experience suggests it prefers 24hours between coats. Rounding up this polishing theme is a guide to caring for traditional leather saddles https://www.sevendaycyclist.com/caring-for-leather-saddles . My derriere has very much bonded with the Cycles Berthoud Soulor Saddle https://www.sevendaycyclist.com/cycles-berthoud-soulor-leather-sadd 

Several weeks further down the line, the Kenda Kwick Roller continue to impress with their blend of low rolling resistance, reassuring grip and of course, puncture resistance. A greasy, wet winter may reveal some limitations (specifically the puncture repelling belt, which covers the centre strip, rather than edge to edge).  

That aside; they’re doing everything I ask of them and the slightly narrower (32mm) section is probably optimal, for my fixed gear winter/trainer’s clearances too. Elsewhere, those looking for a responsive and engaging folding bike may want to take a closer look at this Tern BYB S11 Folding Bike https://www.sevendaycyclist.com/tern-byb-s11-folding-bicycle   

Spaced Out & Salvaged

Inspired by warmer drier weather, and of course, that Holdsworth Cyclone awaiting refinishing, I’ve plucked my Holdsworth from hibernation and decided to revise the cockpit, again. My love of flared drops seems to know no bounds. This might offend traditionalists, but my bikes are built, and evolve to suit me.

That’s not to say I don’t appreciate some people’s desires to keep a classic bike’s authenticity-right down to fasteners. The Soma Highway1 https://www.sevendaycyclist.com/soma-highway-1-handlebars are a fine set of shallow drops, but that oh-so familiar urge for tweaking was calling. Condor’s hybrid design, combining riser and drops https://www.sevendaycyclist.com/soma  wasn’t the most obvious choice, I’ll admit.

After some reflection, I opted for the MK1, and then decided I also fancied a change of brake lever. A quick rummage in the spares’ drawer, unearthed this solitary, orphaned Tektro R200. Seemingly superseded by the RL340, these are nicely finished Campagnolo patterns, right down to the push button Q/R.

Giving change from £25 (pr) they play nicely with dual pivots, centre pulls and cantilevers. Their RL520 cousins were designed for V brakes and compatible with, cable operated disc callipers, such as these Tektro Spyre. Light springs, decent modulation and feel.

Some folks might be a bit snooty, but both represent fantastic value for money. Oh, and if you’re really that fussed about branding,, the Tektro logo could be stripped, using a cutting compound, such as Crankalicious Mayo Jaune Intensive Frame Cleaner https://www.sevendaycyclist.com/crankalicious-mayo-jaune-intensive-  

At 145g, the solitary lever is 85g heavier than the Acor carbon TT lever, it replaces. However, I felt it a more suitable revision-knew it’d come in handy someday! I described the Soma Condor2 Shallow Drop Bars https://www.sevendaycyclist.com/soma-condor-2-shallow-drop-bars  as   “The bar the original Soma Condor Handlebar should’ve been”.

Generally, I stand by this statement, but the original’s lower slung tops, are a better fit with the Holdsworth. Being able to salvage the silicone handlebar tape, was another definite bonus.  In some respects, The Genetic D-Riser 16 Bars https://www.sevendaycyclist.com/genetic-d-riser-bars  might’ve been better still. However, they’re staying on my fixed gear winter/trainer, thank you.

Holdsworth makeover complete, I tweaked the Woodman Saturn Aheadset bearings, gave it a good sudsy bucket wash, then treated it to this Velo21 Blueberry Glaze wax. Despite some initial scepticism, performance and longevity are quite impressive. Aside from apparent quality, and longevity of sheen, its genuinely compatible with matt, satin and gloss finishes. Yes, including this Torus Titanium Stem https://www.sevendaycyclist.com/torus-titanium-stem

Talking of wax, I had intended to dress the chain in Zefal Pro Dry Chain Lube but picked up Zefal Extra Dry Chain Wax, by mistake. An error that only became apparent when the white emulsion began seeping into the links. Mildly annoying, but there we are. No sense starting again, so I delivered three coats and popped the bike away. Quitting while ahead is a definite virtue.  Talking of chains, I checked the Univega’s FSA using my KMC digital unit. To date, wear is nominal, but I acquired a KMC X973 grey replacement, for when the FSA needs pensioning off.  

Fixed chains don’t require the same degree of introspection, but you’d be foolish not to inspect and where appropriate, adjust tension. This was only necessary a couple of times, during the KMC Z1 X’s  lifetime. https://www.sevendaycyclist.com/kmc-inox-chain  By comparison, this is the third time in 1100miles, for the Passport Elements Single Speed Anti Rust Chain https://www.sevendaycyclist.com/passport-elements-single-speed-chai .

Nonetheless, the Passport is a very reliable, relatively smooth and highly corrosion resistant option. The galvanised texture genuinely seems to retain lube better, than traditional polished/electroplated models.

While it copes well with the stresses of a fixed transmission, I’d opt for a heavy-duty track version, if like me, you only run a single, front brake. Perfect for a single speed, or hub geared bike, especially those that see year- round, four seasons; service.     

Gravel Rash

No, I’m not referring to a fast and painful encounter with terra firma (although back in the late 90s, I sported acres of asphalt and slag burns). I am of course referring to the genre of off roading aboard rigid bikes with cyclo cross DNA, bigger clearances and more bottle bosses.

 

This sense of escape is the same as that first imagined as a callow youth, reading mountain bike magazines during geography classes. Back then, I had no money. These days, projects need to pay for themselves and any new one, MUST coincide with schematic and continuous clear outs.

Enter this frameset. It’s a 19inch 631 Dawes from the early 1990s, complete with 1- inch threaded fork. It belonged to Paul Vincent and run by him as a cyclo cross bike, hence, the cantilever mounts were moved to accommodate 700c wheels.

It had been refinished in a rather fetching, although slightly battle-scarred grey. The project brief is to build a fat tyre, pared to the essentials 700c gravel flyer for virtually nothing.

Reclaiming space and cash is imperative. Otherwise, thee comes a point where friends’ garages and loft spaces have also been colonised…Next thing you know, they need these spaces back and, you’re presented with an almighty storage crisis. Things turn decidedly awkward for all concerned.

This sense of panic also means, you cannot separate what is valuable (whether that’s measured in sentimental, or monetary terms).   

I’m a creature of sentiment but there comes a point where three, maybe four saddles, is fine, ditto six sets of (different) condition specific tyres. Ten saddles, 15 sets of tyres and it’s time to rationalise.

Context established, little surprise that I dropped by Maldon Shot Blasting & Powder Coating http://www.ctc-powder-coating.co.uk/  for a chat. Graham seemed quite excited by the project. He gently steered me away from a classic red and toward a candy teal.

Candy finishes though beautiful, are tricky to apply and, even applied by the most experienced sprayers, there can be some very slight variances in the overall effect. I was told by Paul, that the frame had been powder-coated. Hence, I was expecting it to need a dunk in the methyl-chloride tank. This softens the paint, before it can pass to the iron oxide cabinet.

Closer inspection and a knowing sniff; revealed it was our old friend, wet-spray 2K. Hence, having masked the threaded areas, Graham whipped it into the iron oxide blaster. It took twenty minutes to remove every. last trace. However, good, sympathetic preparation and a correctly keyed surface is essential. No dings, dents, or similar imperfections, which was pretty much my expectation.  More next week…

 

Like big tyres? Well, I reckon Vee Tire Co Zilent https://www.sevendaycyclist.com/r  give Schwalbe’s long running and justly revered, Marathon Plus https://www.sevendaycyclist.com/schwalbe-marathon-plus-tyres  a good run for our hard earned. For me at least, working bikes need to be practical but also fun to ride.

Arguably, if a bike isn’t fun, then its not actually that practical. I’ve had a quick switcheroo of my Ilpompino’s front tyre, exchanging the Continental Contact plus https://www.sevendaycyclist.com/continental-contact for the lighter, faster rolling 42mm Maxxis Roamer https://www.sevendaycyclist.com/maxxis-roamer-tyres

I’m a sociable loner and an introvert by nature. Characteristics, which are frowned upon in a society, that favours extroversion. However, many, introverts, myself included, are very capable of holding our own in a professional context. I can interview people and network with suppliers all day long.

Cycle and motorcycle touring teach a myriad of skills. Self-sufficiency and resourcefulness being the most obvious. Forging constructive relationships quickly is another. Crashes can be painful.

The best maintained machines can fail unexpectedly. The skills to repair that broken rack are academic, if you can’t persuade a local mechanic, or blacksmith to lend you their welder. Then of course (As my late father was fond of pointing out) you might want to eat!

No, I didn’t learn to read people’s minds, or perform some Vulcan-esque mind moulding technique. (More’s the pity!). Nonetheless, I can identify whether someone’s intentions are good, or otherwise.

Working with models demands the ability to quickly put people at, and moreover, maintain that ease. My shoots are renown for being very chatty. Unlike extrovert personalities, outside of these contexts, I require a lot of time to myself, contemplating ideas and mentally recharging.

Most recently, I’ve worked with Tom Collins, seen here modelling our Seven Day Cyclist T shirt and the lovely, ultra-professional Amy JR Jones. Amy and I hard originally planned a duo-shoot, with an aspiring male model but he backed out, without notice.   

Braking for Cake, Chapattis & Cold Weather Kit

Having celebrated my birthday, complete with homemade cake and Chapattis the customary week later, a fresh box of winter kit arrived, including these lobster mitts from a well-known discount supermarket chain. Supposedly wind and waterproof, sheer purchase power means that prices are falling while performance and spec continue to rise.

Vaguely reminiscent of mittens that some of us were packed off to primary school with, warmth is their main attraction. Dexterity is better than I’d initially predicted too. Thumb and two fingers are nimble enough for gripping bars, changing gear, grabbing bottles and even drinking coffee.

Communication with touch screen tech is something we take for granted; thankfully the fore-finger makes accurate contact. Traditionally, this design has necessitated removal, say when fixing a flat, or rummaging in pockets for keys. The last thing you want when it’s minus five and you’re ten miles from home.

I’ve been able to remove wheels, wield a tyre lever or multi-tool with surprising finesse, although thankfully, the former scenario hasn’t been to frequent. (leaving my blue/grey fixer on the work stand and at a sensible height seems to have deterred feline attack too). Another chain has sent their top-flight sub £20 set, which look very promising.

As with other garments, especially those made from polyester/polyamide blends; there is a trade-off between weatherproofing and breathability. Personally something highly weather resistant and fast wicking over something “totally impervious” that turns uncomfortably clammy over relatively short periods-even when air temperatures struggle into single figures. 

Ensure cuffs are long enough to form an overlapping seal with training jackets and jerseys. An impervious glove is not much use if there’s a gap for wind, rain or snow to get channelled inside. For this reason, gender specific versions are best. A surprising number of female riders I’ve spoken with in casual conversation suggest they get along just fine with men’s kit.

Gender specific designs are arguably best; so long as these are genuinely anatomically designed, rather than smaller versions of the standard pattern. By men’s standards, my wrists are relatively thin and fingers proportionally longer. These days, I can usually compromise a decent fit with most brands’ large size.

Linings shouldn’t be overlooked either. Check these are tethered at the fingers. This doesn’t tend to prove problematic until wash day. Those that aren’t tend to flop out in a big, soggy clump. Persuading them back into individual fingers can prove frustrating.

Continuing the cold theme, local authorities have been out gritting some of the minor roads recently, pelting Univega and I with those tiny, corrosive particles. To date, the weather has been sufficiently dry enough for green oil’s dry chain lube, which is clean and light; though I will probably strip this in favour of its wet counterpart; or something in between as the roads get carpeted in a slimy cocktail.

Perfect conditions for assessing Pro Green MX’s Cycle Aftershine101’s performance; to date, it hasn’t attracted that familiar grimy patina, which I associate with silicone infused polishes/protectant. 

I’m curious to see how the protective barrier stands up to salt and similar corrosive spatter consistent with regular winter riding over the following weeks. Obviously, these are no substitutes for owner involvement. Ideally bikes should be rinsed off with cold water following each salty, slushy ride-it only takes a few minutes.

Storing bikes in cold garages or outbuildings also helps slow the caustic chemical reaction. I tend to wash my cross and other dirt derived builds straight afterward in any case, but if you’re about to head out for a cold, icy ride, leaving your machine(s) outside for fifteen minutes allows them to acclimatise and means sleet, snow, slush and similar contaminants find it harder to stick...

Shoes and clothing also take a beating, so remember to rinse them off and air dry at room temperature, away from radiators and other sources of heat. So long as the comfort is right, budget tights and winter weight jerseys are among my staples for everyday rides/training around the two hour mark.  Right, time I was getting some more miles in and forming opinions. Look out for a winter clothing overview in Seven Day Cyclist www.sevendaycyclist.com