Showing posts with label Showers Pass. Show all posts
Showing posts with label Showers Pass. Show all posts

Tuesday 14 November 2023

Baggage, Racks & Resurrections






 

Yes, I’ve plenty of the former apparently. Comes with age and experience but that’s not what I’m on about here, so don’t turn away just yet... Storms and general biblical rains have seen me switch Ursula back to the Carradice Carradry SQR Bag CARRADICE CARRADRY SQR BAG | cycling-not-racing (sevendaycyclist.com) while the arrival of this Topeak Uni Super Tourist DX Disc rack saw the Carradice Super C Rack Bag resurrected from several years’ hibernation. I nearly sold it during the pandemic and so glad I didn’t.   


For the uninitiated, the Topeak Uni Super Tourist DX rack is made from hollow tubular 6061 T6 aluminium alloy, finished in a very fetching black powder coat. Ursula sported a Super Tourist DX for a few years-I was very endeared to it and some of the brands’ integrated MTX luggage. Integrated systems are a double-edged sword and on balance, I err towards luggage with a more universal, transferable fit. 


Talking of which, Uni stands for universal fitting, not just for bikes with disc mounts. According to Topeak, it’s built to entertain mtbs with 24–29-inch wheels and 700c builds. Oodles of clearance for big tyres- a boon if you’re switching between bikes of different genre.  


The beefy 10mm tubing also makes a reliable host to rear lights (assuming you’re not using two panniers) when the aero post insert is employed. This version now adorns the fixed gear winter/trainer’s braze-ons, for several reasons. Not least since I’ve been wanting to keep the Exotic carbon seat post, ruling out the SQR luggage I’m so fond of. 


There’s not much difference weight wise, the Carradry weighs 1390g, whereas the Topeak and Super C 1590g. At 915g for the Topeak is heavier than some tubular steel favourites and some aluminium alloy designs boasting similar, 26 kilo payloads. However, lateral stiffness is excellent. I’d much sooner a few extra grams and a laden bike that tracked and handled in good proportion, than one that felt like a runaway blancmange.

  

6061 racks should not be overloaded, or bikes lain down on their luggage. The former might sound obvious, but the latter also places increased stress on them. Wrapping electrical, or duct tape around the sections where luggage touches is another sensible precaution. I’ve only had two breakages in 38 years, and I’m pleased to report I was able to lash them up and ride home on both occasions. A well-known US brand replaced theirs under warranty-no quibble, no fuss.       

Though not a unique frameset by any means, my fixed gear winter has some quirks- most notably the mono stay rear triangle. I wondered if the Topeak’s disc-specific design would impede access to the track nuts-say when adjusting chain tension, or wheel removal.  


Not when using an open-ended 15mm but the cheap and usually cheerful box type are non-starters. I also needed to drop the rear, curvaceous Mud Hugger Gravel Hugger Mudguards MUD HUGGER GRAVEL HUGGER MUDGURADS | cycling-not-racing (sevendaycyclist.com) by a few millimetres, allowing me to bolt the rack and arms in situ. 

 

Topeak have gone for 5mm, rather than 4mm Allen heads but stayed with 8mm bolts- remember a standalone ring spanner, or a multi-tool, such as their Alien in case you need to nip things snug by the roadside. As would be expected, the nuts fasteners employ a thin, rubbery insert, minimising the likelihood of them vibrating loose and being ejected into a verge.  


Anyhow, I’m loving the increased carrying capacity- means I can bring changes of gloves, spare glasses, lightweight shell jackets/gilets and shoe covers for changeable conditions. I also like to postcards and similar stuff mid-ride.  


A time management thing-they’re already en route and off my list, before the business day has begunI’ve also resurrected this Showers Pass Men’s Elements Jacket. SHOWERS PASS MEN'S ELEMENTS JACKET | cycling-not-racing (sevendaycyclist.com) which is aimed at mountain bike audiences, but in my view, well suited to general riding.  


A little heavier than the Oxford Venture (399g compared with 249g) the Elements is a 2.5-layer hard shell laminate model boasts waterproof and breathability ratings of 15,000 apiece and has plenty of internal pockets. Mine is the Titanium version, which is a neutral grey by day but comes alive under street and vehicle headlights. There’s also a “Night Ride” which I’d describe as a similarly fetching green/grey.   


Talking of which editors have been kind and I’ve just received some Altura All Roads Waterproof Gloves. Essentially these are closer to a waterproof sock, than a traditional cycling glove, which along with their subtle colours extends horizons to other, more generic outdoor activities.   


There's a tactile outer made from a Polyester/Polyamide mix (49 and 44% respectively) coupled with 4% Elastodiene 2% Elastane and 1% metal fibre. Internally 75% acrylic, 18% Polyester, 3% Polyamide, 2% Elastodiene, and yes, 1% metal fibre. Palms have the all-important silicone grippers and tech-friendly digits, while retro-reflective finger and thumb tips stop things being too stealthy. Waterproofing is an impressive 22,000mm, breathability 4,500 g/m2/24hrs.   


Reminiscent of the Q365 Anfibio Winter Rain Cycling Gloves I reviewed last year, and there’s little separating them price-wise. Formative impressions are favourable, but it’ll be interesting to see how they really compare several hundred miles down the line. Steve's been really impressed by these Chiba Bioxcell Winter Warm Line Gloves Chiba Bioxcell Winter Warm-Line Gloves | cycling-not-racing (sevendaycyclist.com)


Talking of which, here’s my review of the Schwalbe Smart Sam Performance Line Folding Tyre Schwalbe Smart Sam Tyres | cycling-not-racing (sevendaycyclist.com)


I’d planned to resurrect the Weldite Extreme Wet Lube but couldn’t find it, so have opted for the SKS Lube Your Chain TESTED: SKS LUBE YOUR CHAIN (sevendaycyclist.com) instead- super durable in some very challenging conditions.  

 


Friday 13 November 2020

Concept Realised
















Back in March 1987, reading the now long-defunct “Bicycle” magazine, I happened upon the Muddy Fox Trail Blazer-in essence a mountain bike with drop bars, bar end shifters 1.75 knobbly tyres.. Aside from wanting that particular machine, it awoke a deep desire to build a concept machine. One that was lightweight, rugged, go anywhere (Ok, with some trade-off). Fast forward 12 years, countless miles, a degree and other trappings later..I happened upon the Univega frameset hanging in a friend’s shop window. It started off as a flamboyant red enamel bitsa- bits of this, bits of that-a Frankenbike, some might say.

Wheelset handed down from a racing mtb, Stronglight triple crankset from a tourer, drops from said tourer, 25.4 Kalloy stem, Kalloy seatpost, Shimano 600 rear mech, STX front, Shimano bar end shifters, first generation Shimano SPD pedals, Minoura four point 4130 Steel rack.

Its evolved quite considerably and racked up considerable mileages along the way. Ursula has been a trailer tug, winter trainer, daily driver, tourer and confident come sunny days or bitter snowy blizzards.

Save for the frameset, the only thing remaining of the original build is the front cable hanger. However, it has evolved to meet my needs and is incredibly close to the original brief. High power dynamo lighting, full guards, plenty of room for spiked tyres when things get icy 1x10 drivetrain (albeit more a’la carte than some would like). Throughout this evolution, suitable drops were the biggest challenge.

I experimented with a few road blends, changed the stem and then perfection in the form of these Soma Condor https://www.sevendaycyclist.com/soma  just the right shape, width and enable me to stay on the drops with no loss of control on, or off road. On-One Midge (in the 31.8 diameter) might’ve been a good budget option-I’d run them very happily for a good decade, or so on my fixed gear winter/trainer. However, I’d since sold the Midge on and gone for the Genetic D-Riser 16 https://www.sevendaycyclist.com/genetic-d-riser-bars and Soma Condor 2 https://www.sevendaycyclist.com/soma-condor-2-shallow-drop-bars  on the latter.

A while back, I had toyed with the idea of running Cane Creek Thudbuster ST https://www.sevendaycyclist.com/cane-creek-thudbuster-suspensuin-se , since the 3rd Generation short-travel unit was still available in 25.4 and with a suitably high quality shim, compatible with the Alpina 506’s 26.6 seat tube. At the time, I shied away from this (a) On the basis of cost-this was indulgence, rather than an inherent need.

(b) It was incompatible with the Carradice SQR luggage system https://www.sevendaycyclist.com/carradice-carradry  I was running at the time. Reasonable quality, perfectly serviceable aluminium alloy models to be found in this diameter and my experimentation was titanium was partially successful.

However, I had acquired some very inexpensive Chinese titanium, which was too thin in diameter for machining down to 26.6. Funny what happens when you’re not looking for it…Along came Cirrus Cycles with their Kinekt suspension post. They still offer a 25.4, thus compatible with a suitable shim.

Spring strength varies according to rider weight-ours is the medium, in accordance with my own 70 kilo frame. Some specifications. There is a carbon model but that wouldn’t be suitable for this application (or available in the desired diameter) hence the 6061 aluminium anodised version.

The Kinekt employs a spring/urethane elastomer system, offering travel between 0 and 35mm. Initial setup seems pretty intuitive and I’ve set mine on the firmer side-enough to take some edge off, without robbing too much power. Whether it will win my heart, like the Cane Creek Thudbuster ST remains to be seen…

They’ve kindly sent me a 90mm stem (7 degree rise), which I have earmarked for my fixed gear winter/trainer. Elsewhere, I’m being won over by this Showers Pass Men’s Elements Jacket, which not only keeps the weather out but there have been no issues with the inner fabric “sweating” as some 2.5 layer laminate models can. It also has a chameleon personality meaning it performs well on the bike without looking overly technical, worn with more casual clothing.

Lots of pockets-two at the hip, three internally continues this theme, although I am still very fond of the “Nelson” types. 15,000 breathability and waterproof ratings are well suited to longer, faster paced rides. 225miles in and the Zefal Ceramic Ultra Wet has clung on very tenaciously, despite November’s slimy conditions. Much as I expected, side plates sport a slightly grimy patina but it’s not overly grotty. Looking a bit filmy but still doing its thing.

Last but not least, here’s our review of the Pro-Viz LED 360 Vega Rear Bike Light. Well worth a look if you wanted a simple but effective two-mode design. https://www.sevendaycyclist.com/pro-viz