Revisions, Replacements & Baggage

 

Changes for change's sake and indirectly “adding to the pile” is a temptation I fight hard. Anecdotally, I’m not the only one vulnerable to this urge…I’d acquired a Tiagra long-reach dual pivot brake calliper for the Holdsworth. It looked to offer superior rigidity and therefore, stopping prowess compared to a Tektro R38. It also meant I could complete the revamp in one run, should the XLC unit prove too short. I was also relieved to discover the steerers were identical lengths, so my measuring was reliable. This means there’s no call to prune the new steerer.   

 

One inch Star Fangled Nut unearthed, I pondered a small round file, rather than a drill and 8mm bit to widen the rear crown drilling so it will accept a recessed brake bolt.  

 

I reasoned it was quicker to go slow. You can always shave a little more off, you can’t put metal back. Impatience is perilous at this stage. I added a drop of Muc-Off Wet Lube MUC-OFF WET LUBE | cycling-not-racing (sevendaycyclist.com) to the bit and commenced at a moderate speed. A few minutes later and periodic checking, the recessed bolt slid in beautifully. Relieved, I fitted the Tiagra, which confirmed I needed a longer reach than the XLC. On a roll, I installed a new SFN and ended the session there, while I was ahead, psychologically and otherwise. Theoretically, it's just a matter of switching the crown race and removing a spacer or two. 

 

While on this search and rescue mission, I unearthed Topeak Alien ii multitool. 

  

One of the best pocket workshop models I’ve used and with functions, such as ring spanners missing from most contemporary multi tools. These also lock, for convenience and efficiency. The Passport CDW PASSPORT CDW MULTITOOL | cycling-not-racing (sevendaycyclist.com) is a very charming homage. It’s joined the fixed gear winter/trainer’s Carradice Super C Rack Bag.  The long-serving Carradice is made from “Cotton duck” and, since it attaches via four Velcro straps, so arguably a universal, possibly future-proof fit. I’m a huge fan of Carradice luggage-the SQR range of bags, which are particularly good for day riding, if you didn’t want, or like racks and the host bike had a metal post.  

 

I have the Super C SQR Tour and the Carradry SQR bag. Both will manage a whopping 10 kilos, but the Carradry is the way forward, if you’re looking to venture off road since it's incredibly easy to wipe clean. Being suspended away from the bike, they’re a safer bet for those electricals I was referring to earlier.    

 

However, when heavily laden, the high centre of gravity becomes apparent-especially when climbing out of the saddle on a windy day.  I’d ported the Cycology bar bagCycology See Me Pink Handlebar Bag | cycling-not-racing (sevendaycyclist.com) over to the fixed gear winter/trainer’s Genetic Riser 4 GENETIC DRISER 4 HANDLEBARS | cycling-not-racing (sevendaycyclist.com) for a bit.

 

Rack top bags are very convenient but even those that have a lined base should not host cameras, or other sensitive electrical equipment, since vibrations are transmitted from the rack-regardless of material. I’ve noticed some percussion when riding across washboard tarmac with the Carradice en tow.   

 

Hot on the heels of Ursula’s chain were the brake pads. I’d thought the slight squeal might be attributable to glaze, but the pads were worn close to 1mm. Not surprising, given sustained exposure to flooding and generally adverse wintry conditions. During the treasure hunt, I’d discovered two sets of Disco Brakes, so took this as my cue Disco Disc Brake Pads and Wavey Rotors | cycling-not-racing (sevendaycyclist.com), so took a post-ride opportunity to switch.  

 

Pads, regardless of whether rim, or disc brake can wear very quickly and beyond a certain point, will eat into rotors and rims- much like a worn chain will chomp through rings, derailleurs, and cassettes.  I’m also impressed by the Carbon Cycles SPD pattern cleats, which engage and release very snappily with Shimano and homage designs and are proving refreshingly durable.       

  

Talking of one-does-all, Steve has replaced his recently deceased Dawes Galaxy with Surly’s Long Haul Trucker. It’s always been one of those “from the crate” Beasts of Burden that always fired my imagination. 26-inch wheels might be a little dated nowadays but there’s still plenty of choice tyre and rim-wise and the frame has sufficient clearance for 26x2.1 sans guards. A generous wheelbase and double-butted 4130 main triangle bodes well for stability when hauling the kitchen sink.  Yes, I’d certainly give one a home, if space allowed, although, I’d probably indulge in a Grappler too. You know, to keep it company... Ah, hedge clipping season's in full swing... 

      

Forks Return...Winter’s Wrath Continues

 Lee Cooper returned the Holdsworth’s forks. I’m delighted with the steerer extension and ahead conversion. The eagle-eyed will note it’s a slightly different shade of blue, but I like the subtle contrast, so it’s staying. I’ve retrieved the XLC longer reach dual pivot calliper and then I’m ready to switch everything over, at my leisure- the Holdsworth is a sunny day’s plaything and presently enjoying seasonal hibernation. For now, they can sit in my office.  

The plan is just to whip the Woodman’s lower cup from the Acor carbon unit and transplant it to the steel fork. At that point, I’ll thoroughly inspect the cheap but cheerful Acor and decide whether to keep or euthanise. I’ve sold older, branded forks with 6061 steerers and carbon blades in the past. However, on balance, I’ve concluded it’s not worth the hassle, or risk this time.  

While on these missions, I also acquired another 1-inch Aheadset (an FSA) since these, or at least, decent-quality staples are getting trickier to find-at least at the right price.  The blue anodised finish is another shade of blue but again, aesthetically compatible with the existing livery.  

Famous last words, that’s the Holdworth’s revisions complete. I might port the Miche calliper over to the Teenage Dream as an upgrade to the budget but very serviceable Miche Performance unit but that can all wait- we’re slap bang in the middle of a stormy winter. 

 

The ice relented but was replaced by storm Isha. Milder temperatures induced a switch back to the Halo Spin Doctor and Shimano Alfine Dynohub Shimano Alfine UR700 Hub Dynamo | cycling-not-racing (sevendaycyclist.com) wheels shod with the Maxxis Ikon tyres Maxxis Ikon Tyres | cycling-not-racing (sevendaycyclist.com). I also decided then was time to retire Ursula’s KMC chain. I managed 750 miles before it nudged .7 on the chain checker. Typically, I’ll get 1100-1300 miles so this should give an idea of how wet and generally grotty the past few months have been.  

I have a love/hate relationship with magic links. On the one hand, they are very convenient (especially when you’ve the magic link pliers to hand. Note to self, must locate mine). Much of this arises from a lack of feeling in my index finger, which makes aligning the two parts fiddly-especially when it's bitterly cold. I manage, it's just a slower process.  

While hunting the KMC magic link pliers, I rediscovered this Hyper Cracker cassette lockring tool. It basically turns the bike frame into a giant chain whip and allows roadside cassette removal, say when needing to replace a drive-side spoke mid-tour. Really nicely made and a pleasant resurrection. Wondered where that had got to.   

 

Given things had thawed, I headed out on the fixed for some faster-paced fun. Thick mud carpeted the roads, and I was pleasantly surprised by their grip through some seriously slippery, gloopy stretches. Not quite in cyclocross, or Paris Roubaix territory but not a great deal of tarmac.  Despite the low temperatures, these Castelli Entrata Thermal Bib Knickers are surprisingly comfortable Castelli Entrata Thermal Bib Knickers | cycling-not-racing (sevendaycyclist.com) 

  

As for the tugs, well, perhaps predictably, I’ve gone for another set of MKS NJS. Credit where it's due, the auction site specials were in fact of a decent quality. Problem being they were 10mm, which means they’d foul the chain. The non-drive side was a nice fit. In some respects, I’m annoyed- should’ve just gone for the MKS first time around but that’s the thing with auction sites, they’re a gamble. You can get an absolute bargain or buy cheap and buy twice. 

 

I’m sticking with the Weldtite Ceramic WELDTITE CERAMIC LUBE | cycling-not-racing (sevendaycyclist.com) for now-at least until something seasonally appropriate arrives for testing. As defaults go, there’s a lot in its favour. It’s relatively clean for a middleweight and doesn’t wash off come the first puddle. The advantage over a more traditional, gloopy wet lube is that while it won’t hold back hell n’ high water, it won’t become such an effective grinding paste when grit, salt, mud and other contaminant litters the landscape.