Boom! And The Hub Bearings Were Gone!

December’s slippery start coincided with the complete and extremely audible implosion of the Univega’s rear M475 hub. Slightly tickly shifting was the only warning that something might be wrong. Thankfully the cheap but relatively cheerful unit held together long enough to nurse it the final five miles home.

Some mouse action and a few emails later secured a complete, machine built wheel turning on a more refined NOS, pre disc Deore hub. Something of a workmanlike groupset, I was also very fond of its STXRC predecessor.

This also boasted decent performance and was inexpensive enough to replace should you come a cropper. 

Anyhow, concluding this eulogy to the dearly departed M475, here’s a strip and overhaul piece in Seven Day Cyclist http://www.sevendaycyclist.com/rub-a-dud-hub. 

Better sealed and arguably built than the M475, general consensus suggests to high quality greases and regular servicing is crucial to their performance and longevity.

I have a love/hate relationship with many things, though limited daylight can be a drain; I remain strangely endeared to winter. Not least since it provides the ideal opportunity to see how greases, lubes, polishes and bike washes cope with the blizzard of slush, slurry, salt and slime.

I’ve tended to err towards daily drivers and winter/trainers rather than specific winter bikes per se. However, a simple, well-dressed, season specific machine can be seriously good fun to ride.

In fact, it’s incredibly liberating because you’re focused on enjoying the ride, rather than being pre-occupied with thoughts of expensive composites and brightwork being under siege.

Regular washing (rinse salty bikes with cold water first, since hot will simply accelerate the caustic component destroying process), cleaning and re lubing save wear, expense and hassle later on.

Another editor has left me to play with a selection of lovely degreasers, some high octane, super flammable but ultra convenient aerosol types, others (including Pedro’s Bye Grease Degreaser) are biodegradable pump spray formulas. Pedro’s, like many other brands are decidedly tight lipped about its composition.

In these circumstances, I err on the side of caution and don disposable inspection gloves, keep recipient bikes/components away from plant/animal life and the contents from entering waterways. Pedro’s recommend it as a general gunk removing potion, not just for transmissions.

Like Fenwicks’ FS1, it’s not a visually lively brew but supposedly breaks down contaminant on contact and dried, ingrained stuff within a minute. Despite the fanfare, I felt a little cheated since it requires some concerted stiff brush agitation before making inroads, even on more basic mineral oil/ISO wet lubes or 5w/30 semi synthetic motor oils.

Nonetheless, it’s otherwise pleasant to use, kind to surfaces and skin alike. Siphoning off 20% and diluted with water, it makes a mild bike wash, dismissing organic and lighter petrochemical gloop with similar panache as other eco-friendly blends.

Finish line wet is something of an institution among wet lubes and in many respects, still cuts it 22 years on. Made from “a blend of high viscosity synthetic oils, water repelling polymers and advanced anti-wear additives”; it works out very cheap and so long as you’re prepared to give side plates, jockey wheels and derailleur cages a weekly cat lick, it doesn’t turn into horrendously gloopy component gobbling mess.

Bikes on tarmac only diets can get away with a trace amount on every link, enough lubrication and corrosion inhibition yet minimises the amount of contaminant collected and ultimately, cleaning frequency. During a mild to moderate winter, expect to replenish with trace amounts on a fortnightly basis. Wet lubes of this ilk also double as nifty grease substitutes on fasteners, cantilever posts etc.    

I’m not sure whether it’s the shortage of daylight, pre Christmas mania, or a combination of both but people’s road craft seems to nosedive the deeper we get into December. 

Just this past week, I’ve had several uncomfortably close encounters, despite being lit up like a Christmas tree on acid. A disturbing number of drivers seem distracted and unable to execute competent overtaking manoeuvres, often passing with inches to spare, then braking hard to avert collision with an oncoming vehicle.

Some have clearly been preoccupied with online shopping apps, others applying makeup but I’ve even noted one van driver playing a banjo while at the wheel!  On that note, I’ll leave you with a few more shots of Tanya Atherton from last week’s studio session.

Methyl Chloride to Modelling

I had been keen to undertake some fine art nude photography in a safe environment for several years. Opportunity presented in the form of Tanya Atherton http://purpleport.com/portfolio/tanyaatherton/  and Paul’s studio in Reading http://www.pauls-studio.co.uk/main.htm 

Aside from a disconcerting sign for “South Wales” while trundling along the M4, the venue is very close to the motorway exit and neither taxed elderly Tom Tom, or my pitiful sense of direction. Only one wrong turning (and that was heading home).

Dressed in beloved deep brown cow hide jacket; denims and moccasins ( the latter easily discarded to avoid dirty footprints on white backdrops); I arrived, camera bag bulging with lenses, spare batteries, memory cards, spare flashgun. Then of course, my hand-held “light-sabre” style LED light.

This should’ve catered for every eventuality.... 

In practice, my old faithful Sony Alpha 55 body decided not to communicate with the remote flash trigger.No amount of gentle tweaking or cajoling could persuade it to capitulate, so I borrowed Paul's Nikon D500 for this shoot. Obviously, working in this context it is imperative to consider other practicalities, such as model comfort. Ensure your venue has decent, functional heating, a break area and be very clear about what you are looking to achieve from the session beforehand. Technical skills are no substitute for good interpersonal communication. 

Tania is very intuitive and delightful to work with. Paul’s sage like wisdom and calm, friendly support ensured consistently good results and the three-hour shoot concluded favourably.I would like to pursue this genre further and hopefully, these shots will attract other models looking to explore or expand their port-folio.

Back to bikes... www.sevendaycyclist.com has an overview of commuting/everyday tyres http://www.sevendaycyclist.com/rubber-fetish-talking-tyres and chat with Tegan Philips about Axel, her mile munching Surly disc trucker.http://www.sevendaycyclist.com/tegan-phillip-s-surly-disc-trucker. The Univega’s almost constant exposure to wet, greasy roads saw its bottom bracket and rear triangle engulfed in caked on, slimy grunge.

Much as might be expected from a decent polymer wax, the Pro Green MX bike shine 101 has provided an excellent barrier, so paint, anodising and bright work remained resplendent.  Twenty minutes, some fresh Rock n’ Roll absolute dry chain lube later, we were ready to go again. I’d forgotten how tenacious the absolute dry is-stayed put for at least thee months.

Admittedly much of this was through a relatively arid early autumn but several wet weeks and a good 600miles in, a protective filmy layer still adorned the links. This compensates for the curing time, which is between two and four hours, depending on air temperature.

I tend to leave lubes with this kind of gestation, curing overnight. My personal preference errs toward light to middleweight preps, which attract less grot and therefore, require less cleaning before replenishment.

That’s not to say I’ve an aversion to wet lubes, especially on a winter fixed mountain bike where you want the oil to stay put come hell and/or high water. Many are very quick to apply, make excellent transition to other little jobs and will even double as grease substitutes on fasteners.  

Talking of cleaning, an editor has very kindly presented me with some anti lubes and Pedros’ bike brushes to make my winter fettling that little bit faster. This time of year, it’s worth giving things a quick once-over to stop component seizures before they start.

Something I was reminded of on Wednesday when my MK1 KA’s drivers’ side door lock apparently seized solid. I initially attributed this to a central locking fault, which seems quite common, not only to the KA but Focus too.

Thankfully, stripping away the interior facia and blasting its components with middle weight PTFE spray restored normal, slick function. Since prevention is always better than cure, passenger side and boot mechanisms and assorted heavy duty bike locks also received liberal, precautionary squirts.            

Remaining Conspicuous

 

Been an extremely busy few weeks, testing kit, preparing for winter; talking to Tegan Phillips and being invited to the odd, impromptu photo shoot…Having reached some definite conclusions about Pro-Green MX triple pack  

http://www.sevendaycyclist.com/pro-green-mx-triple-pack    I’ve turned my attentions

to this Pro Viz reflect 360 helmet. Despite widespread acceptance, helmets still divide opinion. Though, I almost never ride without one, I fiercely oppose compulsion and that contributory negligence card, so often played in cases where someone has sustained serious injury.   

Like most other bike apparel, purchase power means standards and to some extent, expectations are higher than ever before. Some respected sports chains are offering extremely well finished models for £20. Admittedly, these are made in the Far East, where production costs are lower and savings can be passed to the end consumer.

The reflect 360 is made in Germany, meets the usual CE 1078 and though branded as a road design but the peak and insect net, suggest love child consequence of a passionate tryst between road and trail lid.  

Like many others at this price point, it comes complete with an “intelligent” adjustment system which allows precise alignment and theoretically, improved protection to the skull’s occipital region. 

This works to the same principle as a car roll cage, preventing twisting injuries that can result from bouncing along tarmac. I was a little disappointed to discover the EPS liner exposed around the rim, leaving it vulnerable to knocks and dings but we’ve not crossed into deal-breaker County.

Now to their patented K star technology. This apparently took two years to develop.

Millions of tiny mirrored glass beads are impregnated within the outer shell; then sealed under a lacquer top coat. Theoretically this also serves an amplifier while safeguarding against peeling, or otherwise getting stripped under normal use.

Pro Viz says the depth of illumination is superior to any other helmet on the market. It’s certainly brighter than any I’ve tested to date. Aftermarket helmet retro-reflective neoprene, halo type bands are a cost effective option but even these don’t come close to the K star system. 

Talking of illumination, I’ve reverted to carrying a spare AA blinkey, especially on longer rides. I know run times are generally pretty accurate these days but I’ve had a few unexpected power downs lately. 

I was chancing my arm a bit with the Cat Eye Rapid X (it had been pulsing away for about three weeks without refuelling) but a Lezyne KTV and Moon Comet X both powered down unexpectedly, fifteen murky miles from home.

Thankfully, I’d had the sense to clip Moon Shield X auto onto my jersey pocket. Not that Cat Eye’s rapid micro rear could be considered impotent-it’s a lot brighter than 15 lumens suggest and will hold its own around town. However, by my reckoning, more bite is required for regular rural riding.

Personal favourites include Topeak Redlite mega and the almost iconic ½ watt Smart complete with elastic band type rubber seal. Cheap as chips, this one’s been a faithful standby for several years now. Replacing depleted dry cells promptly and giving contacts a quick lick of Vaseline seems the secret to its long and productive life.

Technically, we’re still in late autumn here in the UK, gusty winds are stripping trees and hedgerows of their, rich auburn leaves, which blow across the wet roads before forming a slippery carpet. We all have our favourite tyres but arguably there is no definitive model, perfect for every condition.

Generally speaking, I’m a horses-for-courses man and I often slip on spiked rubber when the iceman, or indeed maiden cometh. However, daily drivers call for an all rounder.

We’ve been putting a series of rugged commu-touring models through their paces at Seven Day Cyclist and though one of the coarse 28tpi casings succumbed to a nasty cut (sealed with a healthy dollop of high quality superglue), these 1.6 section Vittoria Street Runner are proving surprisingly sprightly, yet dependable four seasons’ budget option.

Having retired the Vittoria Randonneur trail (which amassed phenomenal mileage before finally succumbing to a series of savage and ultimately, irreparable cuts) the street runner have been coping handsomely with tarmac duties. Even along those mulchy lanes at 25mph plus, they’ve never shown hint of turning bandit and I’ve only punctured once-during the first, relatively moderate month’s testing.      

With Christmas just over a month away, most people have no problems buying presents but not everyone’s so good at presentation. Dolly blue creative can help-whether it’s the festive season, birthday, anniversary or similar special occasion. Her site’s under construction but drop me an email if you’re based in the UK and like what you see here.

Back soon, in the meantime, here’s a male Bhangra dance group from Derby...

Braking for Cake, Chapattis & Cold Weather Kit

Having celebrated my birthday, complete with homemade cake and Chapattis the customary week later, a fresh box of winter kit arrived, including these lobster mitts from a well-known discount supermarket chain. Supposedly wind and waterproof, sheer purchase power means that prices are falling while performance and spec continue to rise.

Vaguely reminiscent of mittens that some of us were packed off to primary school with, warmth is their main attraction. Dexterity is better than I’d initially predicted too. Thumb and two fingers are nimble enough for gripping bars, changing gear, grabbing bottles and even drinking coffee.

Communication with touch screen tech is something we take for granted; thankfully the fore-finger makes accurate contact. Traditionally, this design has necessitated removal, say when fixing a flat, or rummaging in pockets for keys. The last thing you want when it’s minus five and you’re ten miles from home.

I’ve been able to remove wheels, wield a tyre lever or multi-tool with surprising finesse, although thankfully, the former scenario hasn’t been to frequent. (leaving my blue/grey fixer on the work stand and at a sensible height seems to have deterred feline attack too). Another chain has sent their top-flight sub £20 set, which look very promising.

As with other garments, especially those made from polyester/polyamide blends; there is a trade-off between weatherproofing and breathability. Personally something highly weather resistant and fast wicking over something “totally impervious” that turns uncomfortably clammy over relatively short periods-even when air temperatures struggle into single figures. 

Ensure cuffs are long enough to form an overlapping seal with training jackets and jerseys. An impervious glove is not much use if there’s a gap for wind, rain or snow to get channelled inside. For this reason, gender specific versions are best. A surprising number of female riders I’ve spoken with in casual conversation suggest they get along just fine with men’s kit.

Gender specific designs are arguably best; so long as these are genuinely anatomically designed, rather than smaller versions of the standard pattern. By men’s standards, my wrists are relatively thin and fingers proportionally longer. These days, I can usually compromise a decent fit with most brands’ large size.

Linings shouldn’t be overlooked either. Check these are tethered at the fingers. This doesn’t tend to prove problematic until wash day. Those that aren’t tend to flop out in a big, soggy clump. Persuading them back into individual fingers can prove frustrating.

Continuing the cold theme, local authorities have been out gritting some of the minor roads recently, pelting Univega and I with those tiny, corrosive particles. To date, the weather has been sufficiently dry enough for green oil’s dry chain lube, which is clean and light; though I will probably strip this in favour of its wet counterpart; or something in between as the roads get carpeted in a slimy cocktail.

Perfect conditions for assessing Pro Green MX’s Cycle Aftershine101’s performance; to date, it hasn’t attracted that familiar grimy patina, which I associate with silicone infused polishes/protectant. 

I’m curious to see how the protective barrier stands up to salt and similar corrosive spatter consistent with regular winter riding over the following weeks. Obviously, these are no substitutes for owner involvement. Ideally bikes should be rinsed off with cold water following each salty, slushy ride-it only takes a few minutes.

Storing bikes in cold garages or outbuildings also helps slow the caustic chemical reaction. I tend to wash my cross and other dirt derived builds straight afterward in any case, but if you’re about to head out for a cold, icy ride, leaving your machine(s) outside for fifteen minutes allows them to acclimatise and means sleet, snow, slush and similar contaminants find it harder to stick...

Shoes and clothing also take a beating, so remember to rinse them off and air dry at room temperature, away from radiators and other sources of heat. So long as the comfort is right, budget tights and winter weight jerseys are among my staples for everyday rides/training around the two hour mark.  Right, time I was getting some more miles in and forming opinions. Look out for a winter clothing overview in Seven Day Cyclist www.sevendaycyclist.com

30 Years in Review...

It is literally 30 years to the day since an Austrian AuPair presented me with THAT book and my father relented to months of not so subtle hinting and THAT Holdsworthy built Claud Butler marked my thirteenth birthday.  Both Butler and Buxom woman have long since moved on...

These days Semi/compact geometry frames mean oddly proportioned riders, such as yours truly needn’t go the custom route and in real terms, prices have also fallen quite considerably.

Having Lee Cooper cold set the Teenage Dream’s rear triangle and replacing its pretty patchwork parts for a more contemporary groupset has often crossed my mind. Something along the lines of Shimano’s Tiagra, maybe Microshift...I have a Sun Race equivalent tucked away somewhere. A new rear hub and wheel build would complete the transformation. Calling in a favour or two, the cost implication is a very tempting £150...  

These thoughts call particularly loud when I’m out of the saddle. Powering along the climbs and dancing on the pedals, there’s some definite whip felt around the bottom bracket shell. Outclassed is sporting terms, these thin walled tubes still deliver a lively ride that has my soul singing and a massive grin engulfing my face.  

Ride quality is also determined by builder skill. The Holdsworth was built to a standard, rather than a price, which is very telling when hammering along at 35mph plus. By contrast and though technically made from a “better” tubing, the Teenage Dream’s build quality was decidedly “British Leyland” in places.

This was common to a lot of small manufacturers who were trying to compete with both the established masters and higher end volume producers during this era. That said; I recall a big French marque being plagued by similar woes. They too were offering complete machines for little more than the groupset, so even with their purchasing power; corners had to be cut somewhere.

Runny brazing, poorly reamed seat tubes and faced head tubes were commonplace. I even recall several customers getting the wrong paint job! Runny brazing, reasonable reaming and treat-like eggshells enamel demons were exorcised from my frameset in 2009.  

With this and the ill fated British motoring conglomerate in mind, it should come as little surprise to learn I also remain fascinated with the Kirk magnesium frames from this period.

Though these were flawed in many ways, I’d like one hanging on my wall. Frank Kirk came from an automotive background and sought to apply the same mass production techniques to lightweight bicycle frames. Seems they were also finished in house-powder coating, of course.

Simon Haydn http://www.kirk-bicycles.co.uk/Kirk.htm is particularly passionate about them. 

Under the metaphorical tutelage of Richard Ballantine, I love most genres of machine and also have a soft spot for rigid cross country mountain bikes. I spent many years thundering along the forest trails and getting seriously filthy on steel-tubed, fat-tired Kona and later Univega based builds.

Lights from this era fell into three basic types and in my view, grossly inferior to that available to us now. It basically boiled down to dynamos, home brewed Lead Acid masters blasters, or truly cheap and extremely nasty “Halogen” units, which were of the glimmer variety. These days, even a very basic LED blinkey is light years ahead, in every sense.

Some, such as this See Sense unit can even collect data about that potholed lane you would’ve only known about, having trashed a rim with those glimmer types. Once the preserve of suburban commuters, there are plenty of compact torch types packing 600 lumens plus.

Sure, there are still some minor limitations, usually in terms of run times in the highest settings. Here’s a few we’ve recently tested at Seven Day Cyclist www.sevendaycyclist.com     http://www.sevendaycyclist.com/moon-lx760-front-light  http://www.sevendaycyclist.com/moon-meteor-storm-pro-front-light

http://www.sevendaycyclist.com/sigma-buster-600-front-light

Elsewhere, having heard of my recent puncture plague, the good people at the inner tube shop www.innertubeshop.com sent me a batch of five. I have since discovered my not so friendly farm feline has, for reasons known only to himself, been biting the tyre sidewalls! 

He’s not been able to reach the Univega, or Teenage Dream, hence no flatting there.  

If recent commentators are to be believed, we’re due for a serious cold snap, involving a healthy carpeting of snow. Perhaps I should be dusting down these 700x42 42mm Continental and my Univega's Schwalbe winter spiked rubber...