Roads Paved With Dung

Shod with the Schwalbe Marathon GT, Cross flavoured fixer and I have been belting along the back roads. The GT feel a lot faster than their 808g suggest and continue to inspire confidence by the bucket load-in every sense. Talking of tyres, Seven Day Cyclist has an eight month test of another beefy section tyre, Maxxis Roamer http://www.sevendaycyclist.com/maxxis-roamer-tyres  

Fun is obviously high on any rider’s agenda but for me at least, reliability is level-pegging on a daily driver or winter/trainer. I want to concentrate on the ride, or let my mind wander in reflective/creative directions. While punctures and mid-ride mechanicals per se, are all part of riding, being sat by the roadside tackling a flat; or broken chain are events I prefer to keep infrequent.

Last Thursday, the thermometer had barely crept above minus 2, so I headed out late afternoon. Run at 85psi, their contact with the surface, coupled with the ability to regulate speed by holding off against the cranks, made 1in 4 descents and similar efforts that bit more comfortable.

Ascending one climb, dancing on the pedals and shoulders shuffling to similar tempo, my heart momentarily sank at a fut-fut sound, synonymous with a flaccid tyre. Glancing over my right shoulder, I was relieved (and somewhat amused) to discover this was a wheezy, asthmatic contemporary Fiat 500. Said super mini eventually regained composure and passed, observing a welcome 1.5 metre gap a few hundred metres later.  

Three miles from hot coffee, I swept around a bend to discover a young man tending to his motorcycle. I called out, checking he was OK; he affirmed this and explained his motorcycle’s final drive chain has snapped. This was literally 50 metres from where I was performing link surgery the previous Tuesday evening.

I offered to call someone but he politely declined, much as I did at his age and continue to. In parallel with the sheer fun and freedom, Cycling and motorcycling tends to engender a fierce sense of self-reliance.

We wished each other safe journey and I spun my way home, fingers and toe boxes nipped with chill. Next morning, I took the same route and saw his machine parked on the verge. I’m hoping he got home safely, acquired a new chain and is back to enjoying his machine again.      

These Super B professional cable cutter and inner cable puller arrived this week. We’d hoped to get them in ready for the Univega’s rebirth but no matter, these things can’t be helped and it’s timely enough given the stage I’m at with Graham’s GT. 

In common with other workshop kit, such as work stands, cable pullers aren’t essential but make maintenance and repair jobs that bit easier and quicker. Cable pullers; sometimes referred to as fourth hand tools tension the inner wire, leaving yours free to nip everything tight. Care is needed to avoid over-tensioning when feeding the inner wire into the slot but that’s as difficult as things get.

A decent set of snips, by contrast are the staple of any basic toolkit and will repay their investment countless times over. To some degree, there’s no limit to what you can spend. £30 odd is my benchmark and these Jagwire Pro my all-time favourites to date, anyway. http://www.sevendaycyclist.com/jagwire-pro-cutters  At £29.69 the imaginatively monikered Super B TB-WC30 are quite a bit cheaper, which fuelled my intrigue. Will be interesting to see how they fare in the longer term too.       

Elsewhere, John Moss has been plagued by a slipping Alfine set up. He attributes this to the manual system, so is talking in terms of upgrading the mango to Di2-price dependant. Mercifully the tandem’s Nu Vinci hub seems to be behaving itself impeccably since its rebuild.  

The same goes for the Univega, aside from another chain breakage-easily sorted with a few spare links and this Pedros multi-ttol. The 1x9 set up has enough range for long hills and fast descents. 

Full length guards offering ample protection from winter’s slimy slurry and of course, rural backwaters.The highways agency appears to be encouraging farmers to resurface with generous helpings of dung- even its Time ATAC aluminium pedals were showing signs of being engulfed. 

I also resurrected the Geonaute G-Eye2 to capture some footage. Lazily described by some as a poor man’s Go-Pro, it’s less intuitive than the Tom Tom but still offers decent image quality for a budget model.  

Right, I’ll leave you with the Visijax Gilet review http://www.sevendaycyclist.com/visijax-led-gilet  

Grinning Through The Gloom

These Schwalbe Marathon GT tyres arrived for testing from Schwalbe UK. Ours were the narrower 35mm section- nigh on1.4 inches in old money but there’s an even beefier 38mm, which seem a fitting choice, for the latest generation of disc equipped tourer, or tarmac tamed cross/gravel bikes.

These are much faster than the legendary and justly revered Marathon. Something that is immediately obvious from the first few pedal strokes-they’re also significantly easier to mount-no tyre levers required. Stiffer sidewalls, 7mm and 68g apiece separate them from the generally likeable, uber plush Maxxis Roamer.

Their E-bike compliance is also likely to explain the additional girth, although the Schwalbe inspire greater confidence along the wet, silty lanes. The sort that seem perpetually carpeted in gooey dung, complete with thorny, talon-like hedge clippings.

They use the “Dual Guard” system. Rather than our old friends Kevlar/Aramid, Schwalbe employs a two-layer nylon casing and a further 2.5mm strip of India rubber that works like a trampoline, forcing sharps out, thus minimise the risk of a flat. Schwalbe rate it 6/7 and say it strikes the optimal balance between speed and puncture prevention, which sounds perfect for bikes in daily service.

Talking of which, sidewalls feature a reflective strip and dynamo track, adding to their appeal. 

Retro-reflective strip and the Chevron style water channelling grooves are very reminiscent of Vittoria Voyager hyper http://www.sevendaycyclist.com/vittoria-voyager-hyper-tyre .

Interestingly, their profiles are slightly narrower than the faster rolling, Italian brands’ 35mm section, meaning a more comfortable fit in my winter/training fixer’s rear triangle.  

Formative impressions are very favourable. 65 miles along greasy/icy back roads suggest a quick, yet ultra dependable tyre. It’ll be at least 400 before I arrive at anything near tangible conclusions.  

Meanwhile those slushy lanes see regular post-ride rinse-overs to prevent salty, caustic stuff taking hold and moreover, nibbling away at pretty paintwork and components. I’ve got this down to around 10 minutes, including a quick, precautionary squirt of PTFE based lubes on exposed cables, pivot points and similarly sensitive mechanisms. 

I’ve also reverted to the Rock n’ Roll gold lube for more staying prowess but without the stickiness associated with traditional wet lubes.          

Decent lights are imperative during the winter months and not just the retina melting type, of which I am so very fond. Often it is the blinkies, retro-reflective and tertiary lighting that first registers on a driver’s radar. Aside from the Visijax gilet (www.visijax.com ), which continues to impress me with its presence, I’ve discovered the origins of John Moss’s preference for yellow, signal yellow to be precise.

Both his Tandem trike and Mango fairing sport this shade. Having recently changed the Velomobile’s gearing for a 2x9, thus improving efficiency overall, he’s decidedly dissatisfied with attempts to repair the scuffed nose using single pack acrylic aerosols. His godson works at the sharp end of car body repair, thus is fully equipped to apply 2K. We’ve tracked down a suitable Ford shade, so watch this space...

Elsewhere, we’re a bit further along with Graham’s GT rebuild-I’ve just introduced some cheap but cheerful, Jagwire brake cables. While Graham locates the wheels and I await derailleur cables, I’ve sanded some superficial glazing from the Alivio pads and I’m leaving those stainless steel inner wires to stretch to capacity. Then I’ll re-tension, prune and superglue the ends to stop fraying before it starts.

Premium grade cable sets, such as those Jagwire Elite presently stopping the Univega and are immune to such vices-simply tension, tighten the anchor bolts and trim to size. Budget models, though generally faithful servants benefit from a different approach.

Having set cable tension, pump brake levers ten times in succession to induce some slack. Loosen those anchor bolts, pull the inner wire through again and snug tight. I lean toward leaving them overnight and re-tensioning the next morning. They will have stretched to capacity by this point, so once tweaked, shouldn’t induce any short-soiling moments when tackling a 1in4 descent. Same basic principle applies to derailleurs. 

Right, well that’s it for this entry. Off for a chat with someone about a gravel bike...