Grinning Through The Gloom

These Schwalbe Marathon GT tyres arrived for testing from Schwalbe UK. Ours were the narrower 35mm section- nigh on1.4 inches in old money but there’s an even beefier 38mm, which seem a fitting choice, for the latest generation of disc equipped tourer, or tarmac tamed cross/gravel bikes.

These are much faster than the legendary and justly revered Marathon. Something that is immediately obvious from the first few pedal strokes-they’re also significantly easier to mount-no tyre levers required. Stiffer sidewalls, 7mm and 68g apiece separate them from the generally likeable, uber plush Maxxis Roamer.

Their E-bike compliance is also likely to explain the additional girth, although the Schwalbe inspire greater confidence along the wet, silty lanes. The sort that seem perpetually carpeted in gooey dung, complete with thorny, talon-like hedge clippings.

They use the “Dual Guard” system. Rather than our old friends Kevlar/Aramid, Schwalbe employs a two-layer nylon casing and a further 2.5mm strip of India rubber that works like a trampoline, forcing sharps out, thus minimise the risk of a flat. Schwalbe rate it 6/7 and say it strikes the optimal balance between speed and puncture prevention, which sounds perfect for bikes in daily service.

Talking of which, sidewalls feature a reflective strip and dynamo track, adding to their appeal. 

Retro-reflective strip and the Chevron style water channelling grooves are very reminiscent of Vittoria Voyager hyper http://www.sevendaycyclist.com/vittoria-voyager-hyper-tyre .

Interestingly, their profiles are slightly narrower than the faster rolling, Italian brands’ 35mm section, meaning a more comfortable fit in my winter/training fixer’s rear triangle.  

Formative impressions are very favourable. 65 miles along greasy/icy back roads suggest a quick, yet ultra dependable tyre. It’ll be at least 400 before I arrive at anything near tangible conclusions.  

Meanwhile those slushy lanes see regular post-ride rinse-overs to prevent salty, caustic stuff taking hold and moreover, nibbling away at pretty paintwork and components. I’ve got this down to around 10 minutes, including a quick, precautionary squirt of PTFE based lubes on exposed cables, pivot points and similarly sensitive mechanisms. 

I’ve also reverted to the Rock n’ Roll gold lube for more staying prowess but without the stickiness associated with traditional wet lubes.          

Decent lights are imperative during the winter months and not just the retina melting type, of which I am so very fond. Often it is the blinkies, retro-reflective and tertiary lighting that first registers on a driver’s radar. Aside from the Visijax gilet (www.visijax.com ), which continues to impress me with its presence, I’ve discovered the origins of John Moss’s preference for yellow, signal yellow to be precise.

Both his Tandem trike and Mango fairing sport this shade. Having recently changed the Velomobile’s gearing for a 2x9, thus improving efficiency overall, he’s decidedly dissatisfied with attempts to repair the scuffed nose using single pack acrylic aerosols. His godson works at the sharp end of car body repair, thus is fully equipped to apply 2K. We’ve tracked down a suitable Ford shade, so watch this space...

Elsewhere, we’re a bit further along with Graham’s GT rebuild-I’ve just introduced some cheap but cheerful, Jagwire brake cables. While Graham locates the wheels and I await derailleur cables, I’ve sanded some superficial glazing from the Alivio pads and I’m leaving those stainless steel inner wires to stretch to capacity. Then I’ll re-tension, prune and superglue the ends to stop fraying before it starts.

Premium grade cable sets, such as those Jagwire Elite presently stopping the Univega and are immune to such vices-simply tension, tighten the anchor bolts and trim to size. Budget models, though generally faithful servants benefit from a different approach.

Having set cable tension, pump brake levers ten times in succession to induce some slack. Loosen those anchor bolts, pull the inner wire through again and snug tight. I lean toward leaving them overnight and re-tensioning the next morning. They will have stretched to capacity by this point, so once tweaked, shouldn’t induce any short-soiling moments when tackling a 1in4 descent. Same basic principle applies to derailleurs. 

Right, well that’s it for this entry. Off for a chat with someone about a gravel bike... 

Fast Blasts, Broken Chains & Electric Blue GTs

The new Scram chain was awaiting me when I returned from the midlands. Trimmed to size and fitted in a matter of minutes, I spurned the tool free pin for a more reliable union. Derailleur and rear brake cables re-tensioned, everything was behaving impeccably.

Rear/blinkey lights on charge in preparation for an evening blast, the Exposure revo Mk1 front dynamo lamp was decidedly dormant-not a flicker. I initially feared I’d inadvertently snagged the connector wire. Replacements are around the £12 mark. Hardly going to break the bank but

Dirty hub contacts came as a relief and were easily fixed, with a quick wipe and fresh lick of Vaseline. I’ve not had chance to play with its successors, or indeed, their complete hub-dynamo system, which looks mightily impressive.

I’ve always liked integrated lighting for commuting and touring but was traditionally disappointed by the modest to moderate output-fine for being seen but in my experience, underpowered for navigating dark and lonely lanes.

Paired with a decent helmet light, there’s a reasonable amount of trail/green lane potential too, although it’s worth noting that I only run a front light from the Ultegra hub.    

Last hurdle presented in the guise of a faulty rear valve. It was a latex infused self-healing model, which in my experience are reliable enough and will seal small holes but tend to gum up, or go-off after a couple of years.  

Tube swapped for a standard Schwalbe and wheel reinstated, I took a few shots before popping it away and returned to the study to tackle some deadlines and discuss some quotes. Talking of tyres; Vittoria got in touch and are sending some mid-section 700c winter/commuter-touring models for testing at Seven Day Cyclist.  

I’d received some electroluminescent garments from Visijax, so the cold but clear evening was all the excuse I needed to take the Univega for a cheeky twenty mile test run. Lanes to myself and I was the proverbial child at Christmas. Revelling in the tubby tourer’s majestic, magic carpet ride and crisp shifts, my serenity was shattered by the sudden loss of power followed by that familiar, heart-sinking tinkle of chain tickling tarmac...

Pulling over to the soft grassy verge, I rummaged through my wedge pack until I found multi-tool and spare links. Thankfully, despite tumbling temperatures and numbing digits, I was able to execute substitution within a matter of minutes. The Revolution Vision usb helmet light http://www.sevendaycyclist.com/revolution-usb-helmet-light  in constant, 50 lumen mode, provided just enough light to operate by.

These experiences are all part of riding and a reminder why wedge pack inventories are so important. More often than not, there’s little call for anything beyond the spare tube, spare links, multi tool, snack, change and spare batteries for a light/emergency blinkey but it's worth checking their condition periodically. Eighty miles in, I’m delighted with the regeneration of my mile munching friend and confident.

Numb of bum and brain, I took a break from the keyboard, so headed to Maldon Shot blasting & Powder Coating to bolt Graham’s refinished mid 90s’ GT back together.  His Timberline now sports an electric blue livery, created using a chrome effect powder base and blue lacquer atop. He also decided to strip the Alivio crankset, giving rings and the scabby looking quill stem a satin black makeover.

Tiny traces of powder can still infiltrate bungs and masking, so it's worth giving the bottom bracket shell and derailleur hanger a quick chase through before re-assembly. 

I treated Graham’s GT to a liberal helping of wax-based aerosol preserve. This has a slightly heavier solvent content, meaning the nozzle didn’t clog so readily and all the tubes were evenly coated within a few minutes.

Nonetheless, I deliver a more generous helping down the seat tube, which can then course around the frame in warmer temperatures. Blocking off the breathe holes was fashionable practice with some riders but these are designed to allow moisture to escape, hence I chase these through afterward.

Lashings of Muc-Off bio-grease http://www.sevendaycyclist.com/muc-off-bio-grease-long-term-test  were introduced to the headset bearings, bottom bracket shell, cantilever bosses threaded components and contact points.

Though not the thickest blend (or my all-time favourite), I’ve been amazed by its staying prowess. There was plenty of the “strawberry jam” smothering my Univega’s annular headset bearings, even after eighteen months hard service.

New cables and straddle wires are next. In the interests of saving time, we’ve kept the originals as rough templates. Once replacements arrive, I’ll wire everything up and begin fine tuning, exorcising play from the Timberline’s threaded headset. Wheels will also be given a quick once-over. Rim and tyre walls scrutinised, skewers and hub bearings re-greased where appropriate.  

Cream

Paint freshly cured and blemish free, my Univega's frameset grew accustomed to its new identity at centrally heated room temperature. I headed north on other missions and awaited the arrival of those chain-ring bolts for the 1x9 conversion. Several days hence, those bolts had arrived...

Long drives can leave me feeling wired, so I promised myself, I’d “Just do an hour”; treat the frame internally, get the headset, bars, stem, bottom bracket etc in…

Three hours later, I was a lot further along but reaching that dangerous tipping point-the one where thought processes become addled and mistakes made. At 1.30 am, I flopped into bed and resumed building after eight hours rest.

Everything breezed together with liberal helpings of fresh grease and minimal faff. On the subject of grease, I’ve been suitably impressed by the longevity of Green Oil eco grease that remained pretty conspicuous on fasteners and bottom bracket threads alike some months in. http://www.sevendaycyclist.com/green-oil-eco-grease  

Full-length mudguards certainly help but, I was also pleasantly surprised to discover a decent layer of Muc-Off grease still adorning the Stronglight Aheadset bearings. These had been pretty much untouched for two years.    

Rebuilding is an ideal opportunity to give components and accessories a really thorough scrub. Mudguards were purged of wintry sludge; corroded “stainless” fasteners were replaced, re-greased and snugged tight. Many miles in, its KMC X9-ept chain http://www.sevendaycyclist.com/kmc-x9-ept-chain was now well past the first flushes of youth and signalled another enforced break, while waited for its SRAM PC971 replacement to arrive.

Puncture season in full swing, I switched my attention to salvaging tubes. Having discovered my ‘cross inspired fixer’s front tyre pancake flat, I changed the tube, rounded up some other casualties and patched them for spares duty.

Two patches is my limit. Those sporting more; or larger lesions are decommissioned and reincarnated as top tube/chainstay protectors, headset or seat collar boots.

During the Univega’s makeover, Graham asked if I would drop by and strip his scabby old tart- a much loved, though world weary mid-90s GT Timberline.

It would’ve been ungrateful to decline, so, needing a break from the screen I popped in midweek. Two hours, one tin of penetrant spray and some nervous moments later, everything (including a seized UN30 cartridge bottom bracket!) relented.

Frameset bare and ready for the stripping tank, I turned my attentions to the Timberline’s grungy Alivio groupset. A liberal helping of Fenwicks’ FS1, some warm water and furious scrubbing later restored it to a socially acceptable and basically serviceable state.

While kinder to user and environment than my old friend, methyl chloride, the wispy vapour emanating from the other tank, always reminds me of the transporter scene in David Cronenberg’s visceral reworking of “The Fly”. Several minutes later and it had done a decent job of softening and partially stripping the existing finish.

Dredged from the chloride tank, things are basically dry. This one leaves a slightly slimy layer behind, which demands a few minutes longer in the blast cabinet.

After a few false starts, every last trace of residual paint and stickers were gone, leaving only a faintly dimpled, primer friendly surface behind. Graham’s going the blue route and has plenty of choice at his disposal.        

Elsewhere, there’s been a sudden swing to wintry weather. I’ve been thankful for my ‘cross inspired fixer’s quick, though dependable handling while chasing along lanes carpeted in thick slush.

Fixed offers that extra bit of feedback between tyres and surface. The ability to ease off gently against the transmission to slow, rather than pulling the front brake and being spat off is a definite plus!