Back To The Old School

I’ve managed to acquire sufficient chains and control cables for personal consumption and am delighted with Ursula’s Kinekt2.1 upgrade. This final switch has realised my 80’s vision of a drop-bar all-terrain bike. An engaging, lightweight go anywhere, four season’s machine.  

One I sketched, while completely disconnected from the school curriculum and for the most part, my classmates. Sketched without a clue as to how it might be realised, I might add. Daydreams alternated between building a bespoke frameset of my own, to buying something high-end.  

While I would never snub a genuine opportunity to build a frame (as distinct from attending a frame building course) I have decided paying a frame builder, such as Lee Cooper Home - LEE COOPER CYCLE FRAMES (webs.com) to execute my vision, or buying off the peg framesets are more cost-effective, time-efficient options for me.   

Now, I’d be the first to point out that the cynic knows the price of everything and the value of nothing. Building a frameset on a residential frame building course would be incredibly satisfying. However, my money is better invested in a suitable welder and tackling less specialist metalworking projects. Some for my own enjoyment and home economics, other for more immediate, fiscal gain.  

  

Ursula’s frameset is 24 years old, in my possession for 22 of them (bought new old stock). I’ve switched the Zefal Adventure R5 Waterproof Saddlebag ZEFAL ADVENTURE R5 WATERPROOF SADDLE BAG | cycling-not-racing (sevendaycyclist.com) for this Carradice SQR Tour, which is twenty years old. Its waterproof cotton-duck fabric has cultivated a faded patina, but for me, this just adds to its character and testament to its build quality.   

Portly compared with bike packing luggage and can be a handful, laden to the gills but lighter and nimbler than an expedition rack and pannier configuration. Besides, I’ve the trailer for those occasions when I want to haul heavy/awkward loads.  

Unexpectedly, shifting had become unreliable. Cable was the most obvious culprit, since the chain had only recently been replaced, cassette was good. Ditto rear mech and hanger... Inner and outer cable replaced but no matter how much mechanically sensitive tweaking of the rear mech, the brifter remained out of step and a little sloppy.  

Dejected, I packed up for the day and after some reflection, decided on some Tektro RL340 drop levers and a Microshift ten-speed bar-end shifter. This combo might lack the outright refinement, dare I say convenience of Sti/Brifters. However, I ran a similar configuration (Shimano Ultegra) on the original build and there are several distinct advantages, especially on a machine of this kind.  

Aside from reduced vulnerability, in the event of a spill (worst case scenario, they are also cheaper to replace). Shimano Ultegra and the Microshift bar end shifters can be switched to friction, should need arise. Setting up the Microshift was more time-consuming, than the Ultegra.  

However, it all came together nicely, once I decided to take the gear cable in a more ‘cross traditional direction.  Part of the challenge and satisfaction of working on bikes (and machines generally) is working things through and getting them right. 

This also spelled the end for the discontinued (and in my view, fabulous), Control Tech bar tape and prompted a switch to the Soma Condor2 Shallow Drop Bars SOMA CONDOR 2 SHALLOW DROP BARS | (sevendaycyclist.com), since I was in the mood for switching things around. For the time being, I’ve dressed them in the orange Acros Silicone Wrap Handlebar TapeLONG-TERM TEST: ACROS SILICONE BAR WRAP | cycling-not-racing (sevendaycyclist.com), which is a more flattering contrast than I’d anticipated.  

The Peaty’s Bicycle Assembly GreasePEATY'S BICYCLE ASSEMBLY GREASE | cycling-not-racing (sevendaycyclist.com) although will revisit in the depths of winter to see how well it performs, long term and in more challenging conditions.  This enforced leave, coupled with the good weather meant I’ve been getting the miles in on the Teenage Dream and enjoying every moment.  

However, the BBB guards had finally succumbed to fatigue at the mounting points, resulting in some periodic but irritating binding. I’ve stripped them, which has obviously solved the problem while resulting in a cleaner aesthetic.    

 

 

Gripped

The weather is showing some signs of a spring-like renaissance, which is nice, since I now have the Teenage Dream running like, well, the machine I remember so fondly. Discovered the front hub had a little play, so eradicated that and then investigated some boxes that had been left in a corner of the garage since moving.  

Much to my delight, I found a mixed bundle of better-quality tubes –700x18-25 and mid-section 23-40. All packet, so I’ve added those to the appropriate clear storage box and one apiece to the wedge packs. I’ve also decided to switch the Teenage Dream’s PDW (Portland Design Works) Big Silver Road Pump for this Lezyne Road drive Alloy Mini Pump.  

A few millimeters shy of 300, both are best described as midi, rather than mini pumps and in my experience, the PDW has an edge on the resuscitation speed and pressure fronts. However, I’ve found the bracket tenure a little less than ideal, so incremental creep has seen it shuffling down and “wood-peckering” the front mech. Distracting and unwelcome.

  

Interestingly, the Lezyne proved a better guest in the Portland’s bracket, so stays for now. I’ll be carrying CO2 cartridges along though, since I don’t fancy trying to deliver 110psi plus into the bikes’ 700x25c following a flat, although hopefully these will be infrequent, warded off by the pump, tubes, and similar rescue apparel. One thing led to another, and I began foraging for lights.  

Not that it’ll be seeing the depths of winter, but a compact 450/500lumen unit with backing singer and a decent rear blinky are wise precautions from a seen-with perspective, especially enjoying summer evenings. Time flies and light fades when you’re having fun... 

For the time being, I’ll alternate between this Moon Meteor and Bontrager Ion 350 RT front lights, although the Ravemen LR500S front light RAVEMEN LR500S FRONT LIGHT | cycling-not-racing (sevendaycyclist.com) has a bit more clout, thanks to clever lens technology. Chances are I’ll be running them in their frugal flashing modes but a bit more oomph is always useful.  

I found an old but very worthy AA cell model for hanging on the wedge pack and an Oxford Ultra torch Mini+ USB Rear Light 15lm. The latter is a five-mode (one steady, four flashing) rear light that is a good bit brighter than the numbers alone might suggest.  

It's small enough not to interrupt the clean aesthetic. Was never totally convinced the Fuschia pink Knog wireless computer sensor was the best fit aesthetically, but never so offensive as to induce change. Mid rummage, I unearthed a black counterpart, so fed it a new LR44 button cell and swapped them over. 

Minor cosmetic stuff but worth doing, since I was there. It communicates very well with the elderly but very solid decathlon head unit. Not that I would advocate the “Frankenpute” route but I’ve had a few that have performed very reliably. 

Several weeks down the line, Ursula’s shifting had suddenly gone a little “off”. I knew the chain, cassette, ring and derailleur were fine but suspected the cassette’s lock-ring needed snugging down slightly. Job done; I stripped the Weldtite Ceramic, with a liberal helping of Muc-Off High Pressure Quick Drying Degreaser Chain & Cassette MUC-OFF HIGH PRESSURE DEGREASER | cycling-not-racing (sevendaycyclist.com) Zefal Extra Dry Chain Wax ZEFAL EXTRA DRY CHAIN WAX | cycling-not-racing (sevendaycyclist.com)  was the substitute of choice. I also honed the front Genetic CX Cantilever TEST & REVIEW: GENETIC CX CANTILEVER BRAKES (sevendaycyclist.com)   for some additional bite, since opportunity presented.  

A week later and I’d forgotten that wet roads can have a zapping effect upon more traditional wax lubes. Nothing that wasn’t cured, once the flaking residual wax had been reclaimed, and worked into the chain.  

Zefal have also very kindly sent me some luggage- The Z Adventure C2 and Z Adventure C3. These took longer than expected since one carrier refused to bring them into the UK. Much of Brexit’s impact is being hidden by the pandemic but is presently “knee-capping" the UK economy.    

At 2.2 litres, the Adventure C2 is arguably a better fit on a bigger frameset, where it can cosy up against the headtube. However, Zefal also suggests it can be mounted in other ways. I think it complements the Univega quite well, doesn’t obscure the down tube bottle cage/bosses.  

The C2 is water-resistant, rather than proof, so will be interesting to see how it fares on wetter rides, not to mention my garden hose torture testing...  Testing aside, I’ll go with a dry sack to seal the elements out, full stop.