Change Your Weather, Change Your Luck…

 

September has brought with it refreshing rains, which flooding aside, is very welcome for water levels, life and er, product testing. A long, dry spell is great for making the most of our best bikes. Extreme heatwaves aren’t particularly comfortable, even with SPF50 jerseys, shorts and sunscreen, our bodies take a toll.

I’ve been glad to reach for the ultralight, packable race jacket (not to be confused with the old school condom type, which kept the rain off but didn’t breathe. A rabid, sweaty mess isn’t the best look), cap and arm warmers-just in case. It’s also been my cue to tackle some preventative maintenance.

Aside from overhaling long-serving, faithful dyno hubs, I’ve taken the opportunity to re-grease quick release skewers, thru-axle converters, since they’re easily overlooked. Prevention is always better than penetrant spray and persuasion. I also needed to adjust the front brake, which had become a little impotent. Just a question of pulling the inner wire through, snugging the lever’s cable holder and calliper pinch bolts down.  

The Juice Lubes Slick Juice seemed an ideal candidate, not least since I’m exploring its qualities and limitations.  Same goes for bike washes and similar potions, although dry, dusty spells mean bikes tend to get coated in a stubborn filmy layer. Especially around the rear triangle, bottom bracket and downtube.

Tyres are another consideration as we transition to hedge clipping season and of course, wetter, colder conditions. Both are conducive to cuts, punctures and similar stuff I’d sooner not be tackling by the roadside with numb digits.  I switched Muffin’s 38mm Vittoria Adventure Tech for a 35mm Vee Tire Co Zilent MK2 TESTED: VEE TIRE CO ZILENT MARK 2 TYRES that I’d resurrected while on a different treasure hunt. In common with the Adventure Tech, it’s a portly but dependable wire bead model with a 5mm thick puncture repelling centre strip and an aramid strip running bead to bead.

 There are similarities with Schwalbe Marathon too. The centre strip works with a capillary action to push thorns, glass and similar out from the tyre. Muffin’s other dyno hub wheel is shod with a bigger (42mm) Maxxis Roamer TESTED : MAXXIS ROAMER TYRES which I may well switch to during drier, fair-weather spells. The front Mud Hugger Gravel Hugger Mudguard MUD HUGGER GRAVEL HUGGER MUDGURADS | cycling-not-racing  will manage 40mm. I experimented with a model identical to that sported by Ursula. However, it wouldn’t sit high enough around the fork crown, so back to the drawing board. The guard was only £1.50, so no great loss.

 Now was also prudent to do a tube inventory and retire or patch any suspect looking examples.  

Leather saddles are very durable but require a quick lick of hide food every so often. I’d suggest every six to eight weeks as a rough n’ ready. This will keep the hide nourished and protected from the elements. The Spa Nidd pictured has served me well, year-round, for thirteen years.

The wetter weather has also presented an opportunity to get a proper feel for how well the Nutrak Vee Swift Gravel Mud Frenzy cope in softer conditions. We’ve not got to the gloop proper as yet, but they’ve cut through softer sections reassuringly well. Something I attribute to a mix of profile and tread pattern. Pressure also plays a part. I’ve been running them between 50 and 55psi, the upper end of their range, given I’ve been doing a mix of tarmac, trail and green lane.

Despite this, their relatively supple casings ensure sprightly,, yet compliant passage over washboard surfaces, tree roots, stones and ruts. I’m expecting them to cope better than 2.1-, or 2.3-inch cross country mountain bike rubber due to these characteristics and greater clearance. Theoretically, less chance of clogging around fork crown and rear triangle.  Time will tell.

The M Par Ridge Pannier rack also continues to grow on me. There are some limitations common to single tier designs per se, but lateral stiffness is excellent-even with heavy loads. I’ve also been impressed by oodles of heel clearance with big (20 litre) panniers, including the mighty Lomo Zephyr and this Halfords Advanced Waterproof Pannier Bag.

Aside from the top sections, which employ nuts with nylon inserts, I’ve applied some medium strength thread lock to the fasteners- precautionary but good practice, especially when hauling the proverbial kitchen sink, or escaping the maddening crowd.    

 

Midwinter Retrospective

Christmas is always a tricky time for me, and for many, my desire to hunker down and reflect peacefully can be quite perturbing. Those close to me know there’s nothing to worry about and generally leave me to emerge, in my own time.  

Christmas morning and the child-like wonder gripped me. Time for the first outing with Ursula’s newly built dyno hub wheel. Due in part, to the Schwalbe Landcruiser being a few hundred grams lighter than the ultra-dependable Schwalbe Marathon 365, acceleration was refreshingly brisk, despite the wind.  

There had been little relent in the rainfall for a few nights and overspill from the fields had formed small lakes along the lanes, resulting in the gentle swoosh as the Landshark and Mondial pairing cut through the greasy, mucky broth. No such thing as the wrong weather, only the wrong kit I mused, as rain rolled from the Oxford Venture jacket. 

The FLR defender booties and waterproof socks and a slightly lower gear kept blood flow and feet comfortable.  

Engaging the front Tektro based “franken canti” revealed all was well on the toe-in front. No squeal, judder or nastiness, just serene, progressive stopping. Formative impressions of the SD8 hub suggests characteristics are very similar to its SL9 sibling HALO EVURA & SHUTTER PRECISION SL9 DYNOHUB BUILD (sevendaycyclist.com)  in the sense output can dip a little at the lower speeds but I’ve had no issues at 14mph plus.  

I need to take this time to inspect the old Rigida Snyper rim for wear and pension off, as appropriate. The Snyper were a solid, cheerful touring hoop and mine has been super dependable over ten years and countless thousand miles down the line. If it is heading for the Great Bike Shop in the Sky, I think I’ll have the 13-year-old Shimano hub built into another Ryde Andra 40...  

But then, do I acquire a modern, disc brake hub as well, to “futureproof things” ...Hmm, best park that thought for now, there’s plenty going on.  I’ve been doing a little re-touch of the Project 2 fork-applied a thin coat of phosphate primer and several thin coats of gloss black paint, leaving several hours between them. I also applied a thin helping of hide food to leather saddles to keep them protected and nourished. This is something II generally do every six weeks with traditional leather saddles, although some brands recommend longer intervals, which I observe. CARING FOR LEATHER SADDLES | cycling-not-racing (sevendaycyclist.com)   

As we weaved around the twisting bends, up ahead a family of red deer crossed the road and an Oxford/BMW Mini lay stricken in a ditch. Stopping confirmed it had been abandoned- no one was trapped inside, so I continued our otherwise silent and uninterrupted loop. Inexperience, too much Christmas spirit, who knows. Crucially no one appears hurt as a result.    

Looking back on the year and Ursula’s continual evolutions, I was surprised by just how many changes I’ve made over the past 12 months. Most of the drivetrain components were replaced due to wear and tear. Aside from chains and cassettes, the long-serving Shimano Deore LX cranks were beginning to lose their threads, prompting the upgrade to Hollowtech II.  

A couple of months later, I upgraded the rear wheel, since the rim was beginning to deteriorate- it was a cheap but very cheerful example, which had served faithfully for five harsh winters, so didn’t owe us anything. Deore hubs are reliable enough, but if I was going to replace, I may as well upgrade. An XT laced to a Rigida Sputnik was too good to pass up. Then of course, there was the Kinekt 2.1 post KINEKT 2.1 SUSPENSION SEAT POST | cycling-not-racing (sevendaycyclist.com), which was another refinement that had completed my original vision of an otherwise rigid, all-terrain, go-anywhere, four seasons’ build. A concept that originally lit my fuse during an English class in March 87. A Muddy Fox Trailblazer, spotted in Bicycle Magazine, for the curious. A couple of years later, Specialized's Rock Combo just turned things up a notch.  

I switched the Sun Race Brifters for Micro Shift Bar end and Tektro levers, which was another good move, and since I was there, the Soma Condor 2 SOMA CONDOR 2 SHALLOW DROP BARS | (sevendaycyclist.com). The original Condor was a great bar, seemingly perfect for the design brief and the only reason I switched was because the Condor 2 was doing something close to nothing. If I was going to experiment, then was the time. 

Finally, the Sun Race Driven NRX rear mech imploded, replaced by a Tiagra. In many respects, close to a complete rebuild, but aside from some refinements/indulgences, and the mech’s untimely demise, components owed me and the “old girl” nothing. Ah, now my fixed gear winter trainer’s brake has got the sulks-a frayed inner wire. No time like the present...Maybe it got jealous... 

Buoyancy Aids

The long holiday weekend and lockdown presented the ideal opportunity to setup the Redshift Sports Suspension Seatpost and take the Holdsworth for a 7am blast, on Easter Saturday. 20 miles confirmed that I’d set the saddle height just a fraction too high, putting unwelcome strain on my knee joints. However, my pre-load guesstimate was bang on.  

A gentle, progressive sag and return, no power-sapping “Pogo stick” bounce… I slid a 5mm hex key in the binder bolt, then eased the post down by 4mm-perfect. Balmy weather turned Bandit by the mid-afternoon, so I’ve switched back to my Univega for daily social distancing. The weather has veered between 20 degrees and a blustery 10. Conditions that call for a more flexible approach, in terms of clothing. 

Early mornings have been the order of my routine. Therefore, three quarter lengths such as these Primal are perfect. Cooler and I default to a long sleeve base layer and a jersey cum jacket. Milder, I reach for a middleweight training jersey, such as this Prendas Ciclismo Paris Bordeaux Long Sleeve Jersey https://www.sevendaycyclist.com/prendas-ciclismo-long-sleeve-jersey. 

Just now, I’m staying with full finger gloves and alternating between the buff cap (photo) and This Scimitar Recycled Neck warmer, which, rather like the Original Buff can be worn in several ways. https://www.sevendaycyclist.com/scimitar-recycled-neck-warmer  

Despite a generous thatch, I’m finding the Buff Cap a little too airy when battling icy blasts, leading to the occasional “ice cream” headache when scorching along exposed descents. 

Nonetheless, in milder weather, it seems a superior alternative to the traditional race cap. 10 days in, it’s still smelling refreshingly fragrant too... These are also easier to shove in a jersey pocket, when not required.   

30 years back, I was rotating my oval rings and indeed, pouring scorn on the concept. Fast forward to the present, I’d never suggest going oval across the fleet, or otherwise proclaim elliptical as the Holy Grail. In some instances, those running a front mech may need to raise theirs and make similar, small adjustments.  

However, the 15% ovality and 38 tooth Raval ring has certainly transformed my Univega’s gearing from nearly-there, to tailor-made. There is a slight period of adjustment in muscle timing but it’s loosely comparable with that experienced, switching between fixed and freewheel transmissions.  

I’m also trying to steamroller my butt’s specific contours into THAT saddle.  

It had fooled me into a false sense of security after a few hundred. One that was only realised when I switched to my fixed gear winter trainer and the Swift pattern (that has been sat on for many thousand miles). On current progress I’m reckoning a further 300 miles should prove the turning point.   

Despite my best efforts, the Tom Tom Bandit Action Camera Bracket’s infuriating low-level rattle has returned, along with some slippage. I tried to bolster the bracket’s ball joint with Thermoworx Whitemorph https://www.sevendaycyclist.com/thermoworx-whiemorph  but it’s not held firm. Helmet rather than bar mounting may be the only solution.   

As an interim measure, I have resurrected this Geonaute G-Eye2. It’s a 1080HD Go-Pro homage, with some nice features, although it’s not as comprehensive, or user-friendly as the Aperman A80 4K Action Camera https://www.sevendaycyclist.com/apeman. The lack of a preview screen is another minor niggle of mine, but preferable to the Bandit’s noisy and slightly sloppy bar mount. Looks like it should cadge a lift on a Go-Pro type bar/stem face mount, much neater... 

Elsewhere, I’ve concluded switching to the Vee Rubber Zilent, on my fixed gear winter/trainer was a smart move.   Steve’s been relatively impressed by these inexpensive Lifeline Essential Armour Commuter tyres. https://www.sevendaycyclist.com/lifeline-essential-armour-commuter   

Superficially, they are clear nods toward Schwalbe Marathon Plus https://www.sevendaycyclist.com/schwalbe-marathon-plus-tyres and none the worse for it, although you’re limited to 700x32 or 35mm widths.   

I’ve also invested in this fresh batch of tubes too. Well, at 99p each, it would’ve been rude (not to mention silly) not to!