Sunday, 20 October 2024

Rise of The Machines & Slippery Stuff


 





After many hours, the fleet is fettled, and as I’d hoped. Aside from Ursula’s rebuild, I’ve switched racks around, changed brake pads, machine washed bar tape (yes, you can do that with natural silicones). Torrential rains and harvests have seen roads resembling a scene from Paris-Roubaix. I’ve been tackling these on the fixed gear winter/trainer and relieved to report the WTB Evolution and Schwalbe One365 have held their line convincingly through the slippery stuff.  

However, I’ve been quick to brush (and sometimes wash) their casings down afterward, to dislodge any thorns or similar sharps that get bonded to the gloop, causing flats. The Wolf Tooth WT-1 All Conditions Chain Lube Wolf Tooth WT-1 All Conditions Chain Lub | cycling-not-racing (sevendaycyclist.com) continues to impress with its staying prowess and cleanlinessConditions where the simplicity of a single speed/fixed setup is arguably most convenient. I reward it with a good, sudsy bucket clean every few outings, which it duly deserves.  

Clean bikes tend to be more reliable, and problems easily spotted before they strike. Talking of which, while going this route with Denise, I spotted a cut in the rear WTB Evo tyre casing, so plugged that with some super glue. No need for a boot but I really didn’t want a sneaky sharp sneaking inside and causing mischief.   

I’ve increasingly thought of myself as a machine, and while I was hossing down the lanes, it occurred this may serve me well. Assuming the present Labour government isn’t robust enough, it’s a matter of time before large swathes of the UK public are convinced to vote to withdraw from the ECtHR (European Court of Human Rights) courtesy of a charlatan fuelled referendum.  

Those crying for the culling of “Nanny State” were and remain the largest beneficiaries. Concessions such as universal health care and other social cohesion weren’t gifted by benevolent politicians. They were fought for by highly organised and skilled campaigners over many years. People with vision and drive to improve the lives for the betterment of all.  

Staying with humans a minute, good bike shops are worth their weight in gold. Use them (or lose them) and moreover, treat them wellThe odd packet of biscuits also curries favour, although I’m a believer in letting good people know they’re valued and appreciated.  

I’d decided Ursula needed a TRP Spyre rear stopper. Had issues setting up the otherwise intuitive calliper, which boiled down to a not-so-accurate pattern mount. A quick email to mine confirmed they had a suitable mount-less than £7. I could discuss options; ensure it was correct before leaving their workshop. Saving me wasted time, headaches and frustration.  

Within 5 minutes, I had the calliper correctly aligned and impeccably behavedI pruned the inner wire, added a drop of superglue to rule out fraying. Next came the derailleur cables, since I’d left them overnight and taken up the slackGrand finale’... I aligned the bars, tightened the stem’s pinch bolts to 6nm, rocked the bike back and forth with the front brake on to ensure everything was slop-free and then reapplied the freshly laundered Acros bar tape.   

I added some more helicopter tape-this time along the down tube, since I would be tethering the Ravemen XR6000Ravemen XR6000 Front Light | cycling-not-racing (sevendaycyclist.com) battery to it and left this a day or so before heading out for a shakedown ride. I’d replenished the tube stash, multi tool, tyre levers, spare links and similar little spares that could come in very handy down the line.  

Though I’ve got the Topeak Gravel Two-Stage Mini Pump Topeak Gravel 2 Stage Mini Pump | cycling-not-racing (sevendaycyclist.com) riding shotgun on the bottle bosses, I’m very sold on the portable compressor types, which take the struggle out of getting going again following a flat. This is particularly true on colder daysI didn’t take Ursula far- a 5-mile round trip as I needed a break from the keyboard and wanted to check everything was settled. Afterall, braking and shifting can be perfect on the stand but imperfect in the saddle.    

Predictably, I needed to snug the bar con shifters down a little-they were slipping slightly, meaning some chain rub and phantom shifts at the rear. I also needed to push a chain pin further in, since this was slightly proud and catching the front mech every few revolutions. The left brake lever also needed minor realignment-easily rectified, although the deeply recessed 5mm Allen bolts common to the Tektro family of levers requires a suitably lofty ball ended Allen key.   That sorted, I’ve been extending playtimes and reconnecting with my beloved two-wheeled companion.   

 


No comments: