All Terrain

 

 

Tyres switched to trail specific, I’ve been getting some decent mileage on Ursula, exploring some fresh bridleways and unmade roads, far from the maddening crowd. A great opportunity to drop a few gears and assess the Lomo Zephyr Waterproof pannier’s mounting hardware...is it more, or less secure compared with Rixen Kaul Klick Fix along lumpy, bumpy sections...  

It’s a design seemingly identical to that employed by Brae. They seem very compatible with 10mm rack tubing, but I was interested to note they’ve been marginally more secure on the Topeak Uni Super Tourist DX Disc, compared with its standard sibling. Topeak Uni SuperTourist 2.0 NonDisc Rack | cycling-not-racing       

Lomo don’t cite a weight limit, but I’ve added this beefy Masterlock, bringing the present cargo to 5 kilos. Raising the saddle height by a few millimetres was another inspired move. The Peaty’s Link Lube All Weather continued to prove compatible with its Link Lube Dry stablemate, although it’s important to note I’d applied the All Weather once only trace amounts of Link Lube Dry clung to the links, rollers and cassette.  

Then of course, I found one of the KMC chain’s side plates beginning to splay, which was communicated via an intermittent clicking which initially suggested my right foot wasn’t fully engaged with the Shimano XT Shimano Deore XT PD-M8100 Pedals | cycling-not-racing cleat mechanism, thankfully, this struck at the close of, rather than mid-ride.  

I’m forming the conclusion that it's best to buy budget to mid-range chains pre-cut.  Again, an easy fix, pop the old link out and slip in another- a five-minute job, ten taking into account checking the other links for any potential damage, or obvious weakness.   

I’m still toying with purchasing a set of chain link pliers, which make cutting and joining chains that bit faster but only at the right price. Funnily enough, I’ve found the chain breaker on this Pedro's multi tool unusually accurate and ultimately pleasant to use.   

I decided to thoroughly degrease the drivetrain before applying some Motorex Chain Wax to the chain, since I fancied something lighter and cleaner. It's closer to a dry lube than a traditional wax but still requires several hours to cure-overnight is my default, though the visual clue is when it becomes a clear glaze.  

Temperatures were too low for the Blub Wax Lube Blub Wax Lube | cycling-not-racing  to cure effectively and as I’ve said before, it will require reapplication if the bike’s been resting up longer than 48 hours or so.  

My love for Shimano’s MW7Shimano MW7 (MW702) Gore Tex MTB Shoes | cycling-not-racing booties is well versed but generally drier conditions have seen me return to gravel shoes, specifically these Shimano RX6 Shimano SH RX600 Gravel Cycling Shoes | cycling-not-racing  . These have a similarly stiff sole, which is great for efficiency but without impairing walking, or running prowess.  Hedge clipping season signalled another flat-Ursula's rear Continental Cross King succumbing a mile or so from home.

That annoying, demoralising hiss and wet “futting” as I whizzed through the wet, muddied lane...No biggie- spare tube, check tyre casing, replace tube and reinflate. I always carry a pump of some kind but have been increasingly smitten with mini compressors. My favourite to date being this CycPlus AS2 Pro Max E. Pump CycPlus AS2 Pro Max E.Pump | cycling-not-racing which lives in Denise’s  luggage along with the Muc-Off Air Mach Carbon Pump Muc Off Airmach Carbon Pump | cycling-not-racing 

However, a decent hand pump is a lifeline, should the battery tank, or maybe you’ve had a couple of flats during a ride and before opportunity to recharge the mini compressor, or you’re out of CO2 cartridges. I’ve reached the conclusion that a frame fit model, such as this Topeak  Road Master Blaster Topeak Road Master Blaster Frame Pump | cycling-not-racing, or Zefal HPX (which is rumoured to be discontinued). Both will comfortably manage 100psi.  I’ve resurrected this Specialized Air Tool Switch, which at 25cm is compact enough to slip into a rack top bag, away from spatter and other destructive, wet gritty stuff.  

The Cross Kings do seem a little vulnerable to sharps, so I am contemplating a more resilient option at the rear- a look through my tyre stash will doubtless turn up something suitable-use what you got, after all. On the flip side, this new phase of hedge cutting provides ideal opportunity to evaluate the Pirelli Cinturato's puncture resistance... 

  

Smiling Through The Slush

 

Winter had returned with a white blizzard. The air temperature had been around 2-3 degrees but windchill meant it felt closer to minus 2 and visibility was also dropping. Something that sprung to mind while I was out on Denise. I'd donned the Castelli Espresso JerseyCastelli Espresso Air Jacket | cycling-not-racing and Bib TightsCastelli Espresso Bib Tights | cycling-not-racing, Waterproof jacket, waterproof socks, Shimano MW7Shimano MW7 (MW702) Gore Tex MTB Shoes | cycling-not-racing, traditional polyester/cotton cap and the Lomo waterproof gloves. Toasty enough to focus on the conditions. Thankfully, it hadn't frozen overnight, so the roads and lanes were just soft and slushy under tyre.  

 

The MW07 had also become as filthy as they were before I'd deep cleaned them only the day before. Much the same story with Denise, mucky spatter clinging to the down, seat tube and rear triangle. I’d decided to give her a good sudsy bucket wash every four rides, mitigating the risk that winter might take a bite from anodising and pretty paintwork, although decent quality waxes and an absence of gritting lorries along the lanes and B roads certainly helped.  

 

During this phase, I was beginning to question my enthusiasm for lighter weight lubes, but decided I'd stay with them, for the time being. Better more regular application, than a grinding paste. There was plenty of waxy gunk falling away from the jockey wheels during the latest deep clean.  

 

While combing through the cassette, the tool literally disintegrated. Not totally unexpected-I’d had it years and, in my experience, the witches brew of old lube and solvents usually dissolve them. Bin fodder, but I’d enjoyed the satisfying process of coaxing lumps of congealed, waxy stuff from the jockey wheels and derailleur cage. According to the chain gauge, there was plenty of life left in the KMC chain, which was another welcome find, so I stripped the side-plates of residual lube and scuzzy stuff, then reapplied some of the Peaty’s Link Lube All Weather.   

 

We're quite fond of Blub's range of lubricants, although they seem a little quirky. For example, the ceramic Blub Ceramic Chain Lube | cycling-not-racing and dry Blub Wax Lube | cycling-not-racing blends will need reapplying if bike(s) are left standing longer than 48 hours between rides, which might be a moot point on a commuter, or daily driver, but not ideal for sunny day's playthings. Talking of which, Steve's been long-term testing their P Wet lube Blub Wet Lube | cycling-not-racing 

 

 

I’ve decided I’ll switch the Deore crankset’s plastic bearing pre-load cap for a CNC machined aluminium alloy unit, designed to be adjusted using a 10mm Allen key. These are heaps more convenient-especially if I need to snug the bearing preload mid ride. This induced some foraging in the spares boxes- I knew I had one somewhere...Sure, I could buy another for £6 or so on the auction sites but knowing I already had one doing nothing irked me.  

 

Thankfully, I’d located one within twenty minutes, inducing a loud cheer. There are models designed for 8mm Allen keys, which would be easier still, given they’re a common feature on contemporary multi tools. However, with the Oxford Torque R10 Mini Ratchet runs a ¼ inch adaptor, thus widely compatible with other bits, so you can build a custom kit for the road. In many respects, this suits me down to the ground.  

 

However, there’s a lot to be said in favour of the pocket workshop types with chain tools-they can be popped in your chosen luggage and will cater for most situations. Indeed, I’d probably steer those starting out to one of the pocket workshops. Lifeline LIFELINE 18IN1 MULTITOOL | cycling-not-racing   or Passport CDW PASSPORT CDW MULTITOOL | cycling-not-racing  have impressed us. Muc Off 17 in 1 Multi Tool Muc-Off 17 in 1 Multi Tool | cycling-not-racing  is another solid option, if you were seeking a very compact model. 

 

I’d been a little conscious that Denise’s carrier and mudguard eyelet threads were exposed.  

I’d put a drop of winter weight chain lube on them as a preventative measure, but recent wet and muddy outings convinced me it was time to blank them off. A rummage in my fasteners draw unearthed four suitable candidates. Dipping the threaded ends in some Oxford Mint Assembly Grease Oxford Mint Assembly Grease | cycling-not-racing, I sped them home with a 4mm Allen key. 2nm is reckoned the best torque setting for these, and similar fasteners, but I literally just wound them to the bare minimum. A small, but strangely satisfying tweak while I was waiting for the tumble drier to do its thing.  

 

Alternatively, you could go for some Zits. No, not the sort you punished the mirror with during your teens, I’m referring to these Portland design Works (PDW) Zit Bitz PDW Zit Bitz | cycling-not-racing which are designed to blank off unused threaded bosses on your frame, or fork. They’re not intended to take any loading i.e. hold a rack, mudguards (fenders). Aside from adding some colour, dare I say “bling” to your bike(s) they prevent rain and other ingress sneaking inside and creating mischief- rust-stained bottle bosses, no thanks!   

         

 

Temperatures continued to tank over the coming nights, prompting a switch to Ursula and the Schwalbe Ice Spiker Pro. However, in practice, the roads remained thawed, and slushy come sun rise, so I stuck with Denise.  I’ve been pleasantly surprised by how well the Continental Pure Contact Tyres have coped, cutting through and shedding churned gloop much better than I was expecting. That being said, knobblies can rapidly become slicks in these conditions. 35mm cyclo cross designs are an obvious alternative to gravel specific rubber. Hmm, watch this space..