Thursday, 15 June 2017

Tart's Handbag?





 
Spare cone cum spacer arrived for the Halo Aerotrack hub, so I wasted no time in drizzling some green oil eco grease on the threads and winding it home. After a bit of deliberation, I opted to run the Titanium sprocket, checking this had a generous helping of waterproof synthetic grease.
Sat between it and the hub’s aluminium alloy threads. In this instance I’ve gone for White Lightning crystal grease https://www.sevendaycyclist.com/white-lightning-crystal-grease  which seems particularly dependable. However, given this bike serves year round, I will be inspecting more frequently than those adorning the On-one Inbred hub. Remiss of me.
Seems the right hand EAI sprocket and lockring have formed a particularly stubborn union with the aluminium alloy hub threads.  I’ve tried liberal marinades of high quality penetrant/release sprays before introducing lockring spanners, chain whips and primal grunting. Nope, won’t budge. So I’ve put it down and will revisit when inspiration strikes.
Where possible, I like to keep components going-if they’re basically in good order but I’m beginning to wonder-if I’m going the wheel build route, salvage might be false economy. The last thing I want is a freshly built wheel, only for the hub to conk out in spectacular fashion shortly afterward!
So, I am researching alternatives. System EX units were nicely executed budget options, though it’s not clear if they’re still in production. Three times the price but Surly also produce some nice small flange double fixed hubs with more sophisticated bearings…Nonetheless, in the meantime, I’m relieved I held on to the Halo and will make very good use of it.
Staying on the subject of lubes and other fluid tooling, Green Oil have sent us their new Ecospray lube. PTFE and petrochemical free. PTFE (often known as Teflon), was discovered by accident in the 1930s are remains pretty ubiquitous. Not just in engineering applications either; non-stick cooking utensils, carpets and socks being three that immediately spring to mind.
On the plus side, Teflon lubes and greases are cheap, surprisingly effective and reasonably durable. However, it’s not kind to organic/aquatic life and is widely thought to be connected to heart, thyroid and lung conditions.
Repacking hub bearings, headsets, pedals and bottom bracket threads every few months and doing so eight hours a day, 5/6 days every week for thirty years present two very different levels of risk.
The same goes for classic car/motorcycle enthusiasts and professional mechanics, when talking exposure to swarf and other carcinogens found in used motor oil.
I wear latex/similar examination gloves when working with petrochemicals. I must admit that I’m not so fastidious when giving cables and mechanisms a quick squirt, or lubricating chains.  
 So then, to the maintenance spray.
Well, I wasn’t surprised to learn the stock is that, used in their wet chain lube. However, achieving the spray-able consistency requires a greater ratio of plant based solvent.
Some folks will argue that butane/propane propellant put a dent in the eco-friendly credentials but I’m assure quantities involved present minimal impact to environment and user alike.
So far, I’ve used it on the teenage dream’s Regina freewheel, cleat mechanisms and assorted brake cables. The rich yellowy layer could almost pass for a heavyweight PTFE potion, the sort that will, in a pinch double as a summer chain lube. Several weeks and more varied use should give a better indication of its strengths and, where appropriate, weaknesses/limitations.
 

No comments: