Fettling Orgies

 

Having packed pedals, since I wanted to see how stiff this particular lithium-based prep would be through the darker, wetter months, I applied to Denise’s Hollowtech II axle. There was ample Peaty’s Speed Grease PEATY'S SPEED GREASE | cycling-not-racing clinging on, but then was the time. I’d noted the pinch bolts and pre-load were a little dry. The former were unexpectedly arthritic, so regreasing was imperative before seizure could creep in and cause mischief at the least convenient moment.     

Lithium based preps have an unenviable reputation for gobbling seals, elastomers and other rubberised components and can be a little stodgy.  

Fine on contact points, and very durable on winter hubs, but not necessarily desirable if you're competing and want to keep resistance at a minimum. While there's more discernible resistance compared with blends such as Peaty's Speed Grease (which I also surprisingly durable) its much lower than I'd expected and buttery smooth.

Staying prowess, temperature stability, water resistance and general durability are definite plusses and explains their traditional popularity in marine and automotive applications. Time will tell, but at £4.99 for 150ml, at face value, it seems a bargain for generic metal on metal duties.  It’s also been applied to cleat hardware, (which we're all guilty of neglecting until time comes for their replacement).  

Galvanic corrosion, say between metals of different parentage can be another issue- I wouldn't apply lithium to a titanium seat post used in a steel, or aluminium alloy frame for example. However, I'd be less concerned about an anodised aluminium post being used in a steel frame. A polished, fluted aluminium alloy post and I'd be reaching for a synthetic, or failing that, something PTFE based. 

I’ve decided to stick with wax and dry lubes while the weather allows and having covered 250odd miles on the Blub Wax, I’ve got busy with some Carbon friendly drivetrain cleaner, which I’ve had for some years and resurrected from the lubes box. It’s fairly straightforward to apply-simply spray liberally on the drivetrain, leave for a couple of minutes, agitate with a stiff bristled brush, or something like this Finish Line Gunge Brush Finish Line Grunge Brush Solo | cycling-not-racing

I reached for some Muc-Off Dry, since that was close to hand, MUC OFF DRY CHAIN LUBE | cycling-not-racing In my experience, its closer to an emulsion and requires at least four hours to cure properly. Like the Blub, can also melt when temperatures hit the high 20s. In this state, it’s still relatively durable but also readily transfers to hands-annoying if you’ve dropped a chain, or needing to tackle a mid-ride mechanical. Checking the chain health suggests more life than first believed just past .25, so reckon I’ll get to the close of October, possibly even November before its bin fodder. However, I’ve pruned a fresh one down to 108 links in readiness for a quick switch. I noted the front brake pads were looking a little tired, so took this opportunity to replace the pads and regrease the cantilever posts using the Zefal Pro II Grease, which was time well spent and another little job off the list before autumn.   

Talking of switches, following a hunch that packing single sided pedal bodies with a stout grease would offer some weighting (making engagement easier) I switched Muffin to the silver A520 and also moved the down tube bottle cage slightly, which improved access.  

I’m pleased to report the Juice Lubes Bearing Juice has added some weighting and thus, made re-entry (say when frequently clipping in and out in slow moving traffic) more convenient.  While I was there, I  noted the K-Lite Ultra Low Drag K-LITE ULTRA LOW DRAG DYNAMO LIGHT | cycling-not-racing lamp rotating slightly on the Genetic Neuron Accessory Mount GENETIC NEURON ACCESSORY BAR | cycling-not-racing . easily cured by wrapping some scrap inner tube around the mount and replaced the 2.5mm cable ties.   

The nights were quickly drawing in, providing the perfect opportunity to assess the Magicshine Hori 1300’s prowess and I’ve been impressed, not only by the output but its useability. The wireless remote makes it very easy to toggle up and down to avoid dazzling other road users. To my surprise, though obviously good in the seen-with sense, the night flash is potent enough to navigate unlit roads by- at least to 14mph, which is useful should you need to drop down to conserve battery.