Sliding into September

 

After some long, steady miles and pre soggy season prep, I began contemplating stem lengths and wheel switches. Switching Denise to the WTB drops was a good decision. However, I’ve concluded I needed a shorter extension, since my proportionally short torso means I’m feeling a little stretched.

Cue a quick wander round the web and this 25mm long CNC machined unit from the Far East (of all places!) True, it lacks the exotica or refinement of some, but I was keen to ensure I’d got the correct length and could upgrade later down the line, should need arise. May also upgrade the quill adaptor-had to deal with some reticence when slackening, which ultimately led to discovering the expander wedge shedding its threads. I’ve replaced with one from the spares box and acquired this higher-end replacement and will substitute in due course.  While price typically reflects quality, it’s important to ensure a couple of things.

Firstly, don’t default to the Aheadset method, leave a millimetre or two of the top proud. Secondly, once you’ve everything aligned, ensure you’ve got some grease on the wedge and bolt before torquing it down to around 16nm. The wedge should be well and truly lodged in place- no wibble when rocking the bars as you might when turning sharply, say on as fast descent.  

 There are folks who really dislike quill converters full stop and there are a few options. Have a skilled frame builder add a threadless steerer to the existing fork crown- as Lee Cooper did here Oldie But Goodie: Fork Repair & Revision | cycling-not-racing. Alternatively, Inn Cycle offer a threadless conversion headset. Never seen one in the flesh, so can’t comment but they do look well engineered. Custom quill stems are another option.    

Mick Madgett built the Halo TK hub into the Ryde Taurus rim, which led me to switching Muffin’s Mavic Fix-G. HALO FIX G TRACK HUB | Seven Day Cyclist Tourin Tests Commuting and giving it a good clean.  The sprocket had become quite scuzzy given a few weeks in very hot conditions, turning the Weldtite TF2 All Weather Lube runnier and stickier, so it attracted more dirt. 

It will be interesting to see how the newest PTFE- free version fares in this and other respects. Both variants penetrate the chain’s inner sanctum very effectively and I’ve found the original very effective on fixed gear and single speed chains. Switching Muffin’s rear wheel has me wondering if the chainline was very slightly off with the Fix-G hub and I might need to revise the spacer widths to correct this.

Weldtite has also sent me the latest incarnation of a drip wax they’ve been working on for two years. Claimed to return 300km (186miles) in all conditions, not just balmy summer days, I’ve fed some to Denise’s KMC and Muffin’s Izumi and will see how it fares in the coming, increasingly autumnal weeks.

Generally speaking, I default to middle and heavier weight oils, rather than waxes, or more exotic blends when it comes to fixed and single speed chains. However, fair weather conditions and curiosity are why I’ve gone the wax route. Weldtite suggest you can double up for higher miles per application, so I’ve taken this route, without being overly generous.  

Curing times are influenced by temperatures and other factors, including humidity.  

Deep cleaning recipient drivetrains is essential when it comes to waxes and indeed, lubes of different genres. Applied in temperatures around 20 degrees and given a 45 second shake to mix everything thoroughly, it emerges from the spout very predictably, as middleweight creamy emulsion. Not one I’d risk applying indoors, mind. Curing times are in hours- bargain on four in these temperatures, leave it overnight if you can.

 When cured, it assumes a clear glazed state.  Formative impressions suggest low friction and crisp shifts. The bigger question will be how it sheds contaminant-does it attract less grime, is it one of those that flakes away when contaminant gets trapped in the outer layer, flaking off at a certain point to leave a thinner lubricant layer behind… I’ve reached my conclusions regarding the Silca Nastro Piloti Bar Tape Silca Nastro Piloti Bar Tape | cycling-not-racing, which has (and continues to impress with its rugged, grippy natue-impressive in the wet and offering excellent connections with the bars.

Staying with wet stuff, I’d decided it was time to enjoy some forest and bridlepath fun aboard Ursula- I also wanted to see how the Continental Cross Kings and FLR MXT Vibram Trail Shoes coped with bogy mud. Spoiler alert, feet had more traction than tyres. Having ridden a few miles along some mixed, unmade roads and green lanes and generally enjoying ourselves, I couldn’t resist some very goopy bridlepath.

Whoosh…Big grin was quickly substituted by surprise as we hurled in slow motion towards a hedge. Mercifully, the resilient and relatively soft foliage caught our imminent slide, and I slowly came to soft earth, protecting Ursula into the bargain.  Knobblies had definitely become slicks, and as I suspected, the FLR’s Vibram soles will attract soft gloop. However, as I’d hoped, they do shed it surprisingly well- no issues with clipping in and out.  Having returned, I wasted no time in giving Ursla a justly deserved sudsy bucket wash, drivetrain purge, polish and switch to this Weldtite Wax.