Showing posts with label On-one midge. Show all posts
Showing posts with label On-one midge. Show all posts

Monday, 12 January 2026

More Bars & Bargains

 







No, not the sort licenced to sell intoxicating liquors. The quiet of Christmas is very welcome and without fail, results in bike-related revisions- whether it's midwinter maintenance- wholesale cable replacement, rings, chains etc, or more specific upgrades.

The festive season can also give rise to expensive flights of fancy- framesets, fork(s), groupsets- unplanned stuff that seems like a great idea in the moment but can contribute to the January fiscal hangover.  

 I turned my attentions to bars. While generally very attached to the WTB Dirt Drops, I find the drop and reach slightly off- too long and deep. It’s worth noting that I am broad across the shoulders but proportionally short in the torso, so getting the front end blissful can require some trial and error. Bike fits are an excellent investment and certainly reduce the guesswork.

Given both the Soma Condor TEST: SOMA CONDOR HANDLEBAR and WTB “in stock” there wasn’t any outlay, just experimentation. I wanted to continue this tradition, without being pointlessly tight. Genetic D-Riser 16 GENETIC D RISER 16 BARS | cycling-not-racing was the obvious contender with its 75mm reach and offered an extra 20mm rise.  

However, I fancied something with a shallower drop. Some NOS Ridgeback Gravel Drops going for proverbial pennies came under my radar. While the Ridgeback don’t feature any rise, they have an 8-degree flare, mm reach, drop. I’d also had half an eye on Genetic’s Digest, which feature a very favourable 76mm reach and 110mm drop.  

One thing led to another, and I found myself acquiring a set of each. It didn’t take me long before I switched Denise’s WTB Dirt drops for the Genetic Digest. Thankfully, though it took a while to port everything over, prune a brake cable outer and similar quick tweaks, no replacements required- this also applied to the Ergon Orthocell Bar Tape Ergon Orthocell Handlebar Tape | cycling-not-racing.

Out on the road, the Digest’s flare is very discernible and gives tremendous leverage, which, aside from trail duties is particularly helpful if you’re towing a trailer, or tagalong. That said, coming from a traditional road bar, steering will feel barge-like to begin with.

Another similarity with On-One’s Midge, they open the chest cavity, which really helps when powering up the climbs- great for cyclo cross, or indeed climbing on the fixed. The only other significant consideration is that greater width can make navigating tight spaces trickier- negotiating congested traffic, or indeed doorways.  

I’ve decided I’ll keep the Ridgeback as spares, should Muffins’ D-riser 4 show any signs of fatigue. As with Ursula, I’ve reach and height absolutely bang on for my needs. Though I’m a fettler, the old saying “if it ain’t broke don’t fix it” resonates strongly.      

Another thing to consider when choosing drops, at least for mixed terrain, or indeed, dedicated trail duties (as distinct from cyclo cross, where there’s a lot of dis and re-mounting when things get more technical) is the bar’s uniformity, meaning that lights and other accessories are easily mounted-at the desired angles. 

I’d contemplated retiring the Giant Continuum 9 function computer, but found replacing the batteries, giving the contacts a quick squirt of maintenance spray restored the original performance and appears to have addressed some connectivity issues, especially when riding through areas of high electrical interference. A New Old Stock Blackburn Atom 4 (the wireless version) may well be finding its way to Ursula, assuming I can successfully troubleshoot some minor niggles.

 New contact points and indeed, adjustments always feel different to begin with, hence I leave things set that way for a couple of hundred miles and tweak accordingly

Obviously, a longer threadless steerer and spacer play will have the same effect and overcomes some of the limitations of quill stems and in this instance, adaptors. However, I should also point out, higher end models such as this Profile design are infinitely superior to the generic types found on auction sites. Yes, I’ve used those and they’re adequate, but that’s it.   

Several months down the line. I’m also very impressed by the Wolf Tooth Morse Bottle Cages Wolf Tooth Morse Steel Bottle Cage | cycling-not-racing. Ours were the stainless versions combining a timeless aesthetic with high degrees of adjustability and bottle tenure is excellent. 

 

Monday, 28 July 2014

Stems n' Scorched Grass








Sometimes it seems, doing less actually achieves more and I’ve had a few days recently where fruit has materialised with little; or no tree shaking on my part. 

More detailed measurement/calculations confirmed the Salsa stem would’ve been fractionally too long n’ low for comfort-hence attempting transplant surgery would’ve been a frustrating fools’ mission. Salvation materialised in the guise of this 35degree, 70mm long 6061 One23 unit. Standards of finish and machining seem pretty good throughout and four bolt face designs offer a vice like grip, although it’s imperative that all fasteners are tightened to identical tolerances to prevent bars succumbing to potential stress fracture over time.

Wider bars offer excellent control on or indeed sans asphalt and increased leverage should prove a boon when hauling trailers along wintery roads, enhanced further by a more upright stance. On the flip side, this will mute traffic jamming prowess but hardly a concern since said four seasons’ workhorse earns its keep on open roads, rural backwaters and green lanes.

I had toyed with the idea of passing these 25.4 On-One Midge and corresponding stem on via ebay but decided they’d prove handy revisions for my cross inspired mtb hybrid. This might also present a few challenges shifter wise.

Top mounting seems like a good idea, yet demands splaying the clamp to accommodate road bars larger overall (not just bulge) diameter and precludes shifting when hunkered low on the drops; hence I will opt for mounting another STX 8spd pod inboard of the end. Shorter cable runs are also conduits for crisp, snappy changes. An 11-19 straight through block sounds an odd choice too but adequate (when paired to a 32 tooth ring) for tackling moderate woodland/green lanes to around 17mph without spinning out on the road.

Joshua has been testing boundaries in a positive sense, expressing renewed interest in longer road outings with yours truly-something I’m obviously keen to encourage. Rides of this duration are best tackled on his 14/24 mountain bike, shod with slick, or higher end dual purpose rubber-a machine he’s fought shy of thus far and should fit him nicely by now.

Talking of gearing, resistance seems attributable to derailleurs-while competent with the Frog 62’s 7 speed revoshift, he’s never completely embraced them and a triple served only to accentuate this. Maybe this wanderlust will nurture acceptance by stealth…

Now, pretty much all bike washes/degreasers are touted as being biodegradable, bunny loving etc. these days. However, I recall mechanics saying some eat seals in their parts washers and despite liberal rinsing with garden hose, a very effective, highly tuneable concentrate that really impressed me recently hasn’t shown my lawn much compassion. Thankfully frame and component finishes remain in rude health but illustrates why standing times shouldn’t be exceeded.

Elsewhere, invitation to an Indian wedding in the midlands presented ideal opportunity to extend my photographic horizons-I’ve been particularly keen to find a foothold and built positive repute within this genre for several years now.

Everyone is a wedding photographer these days; some are extremely capable, imaginative professionals, others anything but. Look through any trade journal/website and you’ll find copious lament about “weekend warriors” damaging the trade’s repute and there’s much to agree with.

Urban myth suggests photographic skill only existed in the days of darkrooms. The advent of digital removed any skill-point, shoot and hey presto (and acquiring a mortgage means owning a house outright!!!). Counter argument suggests knowing one’s market, carving a niche and leaving others to theirs. Street corners are littered with folks offering to perform oil changes for a fiver, of course they’ll have public liability cover and decades of workshop experience under their belts should something go wrong…