Showing posts with label Shimano freehub. Show all posts
Showing posts with label Shimano freehub. Show all posts

Tuesday, 25 April 2023

Spring- Sunrise & Strip-downs











  

Yes, inspiration doesn't just strike in the saddle-the small house is another chamber of innovation, and Eureka moments. I discarded the hard-working but progressively deteriorating SKS Blumels Shiny Mudguards SKS BLUEMELS SHINY MUDGUARDS | cycling, but not ususally racing (sevendaycyclist.com), and gave the frameset a deep clean. A good polish and rear wheel switch followed, and I also took delivery of this Mud hugger guard.  

I’d tested their gravel hugger cousins MUD HUGGER GRAVEL HUGGER MUDGURADS | cycling-not-racing (sevendaycyclist.com) and remain impressed with their build quality and coverage. Obviously, protection doesn’t rival that of full length, traditional chrome plastics but it does broaden Ursula’s off-road potential and indeed, tyre choice. I could, for example, run the Schwalbe Ice Spiker Pro albe Ice Spiker Pro Tyres | cycling-not-racing (sevendaycyclist.com) comfortably at the rear.   


Now, look closely and I’ve had to trim the mounts since it was fouling the fork’s cantilever mounts. I initially mounted them with two cable ties each side- a 4.8mm and two slightly thinner OEM. I ultimately switched these for two 7.6mm example for improved, vise-like grip.  

 

The Mud hugger would also allow bigger section, trail-orientated rubber and exploit the machine’s true off-road potential. No rear guard? Mud Hugger are designed as disc-specific, so incompatible with Ursula’s rear triangleTraditionally I’ve not taken to clip-on MTB guards, save for the legendary Crud modelsOthers have either had an unappealing aesthetic and/or tended to rotate and ultimately, warp and failI have something planned on the tyre front but will leave you guessing for now.  


I was still testing the Weldtite Bike Cleaner Concentrate and was getting a funny feeling about the XT hub’s freehub, so this presented an obvious opportunity to remove and the cassette, strip and inspect the freehub and upgrade the bearings.  


Everything released nicely-not surprising, given I’d not long stripped and re-greased the bearings with Juice Lubes Bearing Grease. The freehub seemed fine-I just wiped with a clean rag and drizzled some Peaty’s Speed Grease PEATY'S SPEED GREASE | cycling-not-racing (sevendaycyclist.com) into the freehub bearings and threaded fastener.  

For the bearings, I went for something a little thicker, but lighter than the Juice Lubes Bearing Juice. Muc-Off Bio Grease TESTED : MUC-OFF BIO GREASE (sevendaycyclist.com) was to hand and in my experience, is reassuringly durable.  


Little and often maintenance is the best way of staying on the road or trails and breakdowns/component failure and costs to a minimum. However, things are a little more nuanced than this. I (and many other riders) run two sets of wheels on their daily drivers/working bikes, meaning I can switch while I service and to a greater extent take more time, should components require replacement, or similar service staller strike.  


Similarly, there is a point where the convenience, economy and satisfaction of working on our machines (be they bicycles, motorcycles, cars, boats etc) can tip over into an all-consuming orgy of continuous improvement. Time, other duties all evaporate in the quest to metaphorically (and sometimes literally) “tune beyond perfection”. That’s fun and resonates very deeply with me. However, when it comes to everyday maintenance and overhaul, tasks are best confined to certain, disciplined timescales.   


Plan ahead, be organised, have the correct tools to hand and quit while you’re genuinely ahead. Maintenance courses can be a sensible investment if you’re a beginner, or just looking to improve. There’s always something to learn and skilled instructors to guide and inspire confidence.   


Conditions have felt a little more spring-like, not that I’ve brought out the ¾ lengths and lightweight, long-sleeve jerseys just yet. I have regrettably had to pension off the Altura Night Vision Waterproof Gloves, which had done around 35,000miles (about 56327.04 km) over the last 5 years.  


Again, with heavy heart, I also consigned a pair of the brands’ bib tights to the bin. The pad was past its prime and the Lycra was also showing signs of abrasion damage, so thanked and read their last rites. Talking of reading, here’s a guide to the river Rhone Cycle Route THE RIVER RHONE CYCLE ROUTE GUIDE REVIEW (sevendaycyclist.com)