Belting along a wet, greasy backroad, just past sunrise I was suddenly serenaded by an awful loss of traction and disconcerting chatter- the fixed’s chain had derailed. I’m not sure who was more horrified- me, or the feline preening itself as I entered the bend. Pulling over to the left I discovered it had mysteriously jammed between the chain tugs. A moment of panic quickly subsided, and I reached inside the Topeak MTX Trunk Dry BagTopeak MTX Trunk Dry Bag | cycling-not-racing (sevendaycyclist.com)for my Pedros Trixie and Pedros’ multi tool, so I could slacken the tug and the track nut.
I was relieved to find these and doing so released the chain without incident. I hooked it back on the sprocket and front ring checked alignment and snugged the track nut down, ditto the chain tug. Tension sorted, I continued, relieved I wouldn’t be doing a ten-mile walk of shame. I’d just pulled in at home and discovered the front WTB Exposure rapidly losing pressure.
Well, if it was going to happen, now would be most convenient. One thing led to another. Popped the fixed gear winter/trainer on the work stand, whipped out the wheel and traced the flat to a hedge clipping buried in the tyre’s shoulder. I nearly missed it, having swept my hand around the Exposure’s casing, found nothing and instated a new tube. Thankfully, I was able to free it with this set of needle-nose pliers. Tyre remounted and 70psi inside, I found myself busy with sudsy bucket and Green Oil Massive brush, giving my faithful friend a good clean.
While cleaning the Spyre SLC calliper, I noticed the semi-metallic pads were OK but showing signs of wear. With more taxing conditions coming, sintered seemed the way forward. Always prudent to have consumables set by, since stuff often wears out at the least convenient moments. I also found another two 10speed chains while having a rummage for a suitable tube (not wanting to deplete the on-bike supply). The Ravemen LR1000 continues to impress me with its output and features- the ability to extend run times, refuel tech and indeed, the battery via another battery or power bank. The Wired remote doesn’t come with the package, I got curious and tried that belonging to the LR500 but being a few years old, the port end was micro-USB, while the LR1000 is the contemporary USB C.
I’ve also received this Zefal Supervision R150, which as the name suggests is a rear light producing 150lumens. IPX6 for weatherproofing bodes well for wet winters and 5 modes (3 steady, two flashing) continue the practical narrative. I’m pleased to note a 15-lumen steady, which is punchy but not overpowering for town duties. The flashing are 150 and 50 lumens, which is great for daylight running and dark nights but overkill for other contexts, which may be a turn off for some. Weirder is the fact it isn’t supplied with a USB C charge cable. Given these things are ubiquitous and dirt cheap (unless that’s the logic for its omission) I’m astonished as to why one hasn’t been tossed in as standard. There are some other interesting quirks. The switch requires a sustained three-second press before the light will power up/down, a second longer than typical these days, which initially convinced me I must have a duff unit that wasn’t charging properly .
Bike cleaned, re-lubed and put away, it was time to do a quick stint with Ursula. Fitting the headset and forks, specifically. Everything came together nicely, the new Stronglight unit given a liberal bed of Juice Lubes Bearing Juice.
Inspecting the long serving One23 stem led me to pensioning it off- there was some weakness around the lips. It had done ten years or so and owed nothing. Took a while to track down a suitable substitute, but this ZOOM has proven to be perfect-a quick game of musical spacers and all sorted. I also ordered some fresh stainless steel bottle boss screws from another supplier.
I’m all for re-using good stuff but rebuilds are an opportunity to inspect, evaluate and replace things, as necessary. Unless they’re dog eared, I tend to put unwanted fasteners into the spares pot and carry a couple in a sealed packet on the bike, just in case I should lose something-a mudguard, or light mount for example. These and the cages were fitted during the same session and using the Oxford Mint Assembly Grease.
