Change Your Weather, Change Your Luck…

 

September has brought with it refreshing rains, which flooding aside, is very welcome for water levels, life and er, product testing. A long, dry spell is great for making the most of our best bikes. Extreme heatwaves aren’t particularly comfortable, even with SPF50 jerseys, shorts and sunscreen, our bodies take a toll.

I’ve been glad to reach for the ultralight, packable race jacket (not to be confused with the old school condom type, which kept the rain off but didn’t breathe. A rabid, sweaty mess isn’t the best look), cap and arm warmers-just in case. It’s also been my cue to tackle some preventative maintenance.

Aside from overhaling long-serving, faithful dyno hubs, I’ve taken the opportunity to re-grease quick release skewers, thru-axle converters, since they’re easily overlooked. Prevention is always better than penetrant spray and persuasion. I also needed to adjust the front brake, which had become a little impotent. Just a question of pulling the inner wire through, snugging the lever’s cable holder and calliper pinch bolts down.  

The Juice Lubes Slick Juice seemed an ideal candidate, not least since I’m exploring its qualities and limitations.  Same goes for bike washes and similar potions, although dry, dusty spells mean bikes tend to get coated in a stubborn filmy layer. Especially around the rear triangle, bottom bracket and downtube.

Tyres are another consideration as we transition to hedge clipping season and of course, wetter, colder conditions. Both are conducive to cuts, punctures and similar stuff I’d sooner not be tackling by the roadside with numb digits.  I switched Muffin’s 38mm Vittoria Adventure Tech for a 35mm Vee Tire Co Zilent MK2 TESTED: VEE TIRE CO ZILENT MARK 2 TYRES that I’d resurrected while on a different treasure hunt. In common with the Adventure Tech, it’s a portly but dependable wire bead model with a 5mm thick puncture repelling centre strip and an aramid strip running bead to bead.

 There are similarities with Schwalbe Marathon too. The centre strip works with a capillary action to push thorns, glass and similar out from the tyre. Muffin’s other dyno hub wheel is shod with a bigger (42mm) Maxxis Roamer TESTED : MAXXIS ROAMER TYRES which I may well switch to during drier, fair-weather spells. The front Mud Hugger Gravel Hugger Mudguard MUD HUGGER GRAVEL HUGGER MUDGURADS | cycling-not-racing  will manage 40mm. I experimented with a model identical to that sported by Ursula. However, it wouldn’t sit high enough around the fork crown, so back to the drawing board. The guard was only £1.50, so no great loss.

 Now was also prudent to do a tube inventory and retire or patch any suspect looking examples.  

Leather saddles are very durable but require a quick lick of hide food every so often. I’d suggest every six to eight weeks as a rough n’ ready. This will keep the hide nourished and protected from the elements. The Spa Nidd pictured has served me well, year-round, for thirteen years.

The wetter weather has also presented an opportunity to get a proper feel for how well the Nutrak Vee Swift Gravel Mud Frenzy cope in softer conditions. We’ve not got to the gloop proper as yet, but they’ve cut through softer sections reassuringly well. Something I attribute to a mix of profile and tread pattern. Pressure also plays a part. I’ve been running them between 50 and 55psi, the upper end of their range, given I’ve been doing a mix of tarmac, trail and green lane.

Despite this, their relatively supple casings ensure sprightly,, yet compliant passage over washboard surfaces, tree roots, stones and ruts. I’m expecting them to cope better than 2.1-, or 2.3-inch cross country mountain bike rubber due to these characteristics and greater clearance. Theoretically, less chance of clogging around fork crown and rear triangle.  Time will tell.

The M Par Ridge Pannier rack also continues to grow on me. There are some limitations common to single tier designs per se, but lateral stiffness is excellent-even with heavy loads. I’ve also been impressed by oodles of heel clearance with big (20 litre) panniers, including the mighty Lomo Zephyr and this Halfords Advanced Waterproof Pannier Bag.

Aside from the top sections, which employ nuts with nylon inserts, I’ve applied some medium strength thread lock to the fasteners- precautionary but good practice, especially when hauling the proverbial kitchen sink, or escaping the maddening crowd.    

 

Filth, Flats & Fatter Tyres

November has crept in stealthily. Temperatures struggle to reach double figures, skies are sombre, and the roads are strewn in a mucky slurry. The sort that sticks to frames and tyres, encouraging flints and other sharps to burrow inside, inducing flats. I’ve had three in as many rides.  

Two post ride-one apiece up front in the 28mm CST Czar and Vittoria Roubino Pro Control Graphene 2.0 Vittoria Rubino Pro Control Graphene 2.0 | cycling-not-racing (sevendaycyclist.com) and most recently, the rear Vittoria on the return leg, 2 miles from home at 5.30 am. Presented the opportunity to see how conducive the Shimano RX6 shoes were to running in- well, as it happens.  

While running alongside my fixed gear trainer, I pondered the solution and concluded I’d go for the Kenda Kwick Journey KS Plus KENDA KWICK JOURNEY TYRES | cycling-not-racing (sevendaycyclist.com) on both rear halo hoops (since the frame’s rear triangle will only accept 32mm and mudguards. OK, 35mm at a pinch.) and the Vittoria Adventure Tech Tyres. These carry a joint weight penalty close to a kilo.  

However, both roll remarkably well and have excellent puncture resistance, albeit their puncture-repelling belts (5mm and 3mm respectively) only cover the centre strips. Obviously, tyres need to roll and handle in decent proportion, but reliability is imperative. There's nothing more morale-sapping than a series of flats in freezing rain, miles from home.  

Or, for that matter, a long walk home. I carry at least two new tubes and a patched spare. CO2 inflator and cartridges save time, although a decent pump should never be overlooked.  I also like to keep these close to hand, and easily accessible. Small bar bags, tool bottles can be more convenient than the wedge pack (although I tend to distribute kit evenly across the three).  

Oxford Products have sent us their Evo Aqua Adventure range of luggage. Following the access narrative, I’ve gone for their top tube bag. It’s made from 400 denier Rip stop TPU, features welded seams and is weather resistant to IPX6.  

1.5 litre carrying capacity, which is generous. “Bolt on” packs like the Apidura that tether to a frame’s bosses (or via these Tektro Versa mounts) are the most secure, overcoming any risk of movement, especially when filled close to capacity. Some pedalling styles can also result in occasional knee contact, which is another consideration when choosing one. On the stability front, some Velcro models favour larger diameter/ flatter profiled top tubes. Only time and miles will tell but giving change from £20, the EVO Acqua looks a good deal. 

   

Thankfully, temperatures have held around 2-3 degrees overnight, so I haven’t shod Ursula with spikes just yet. I have mounted one to the Alfine dyno hub Shimano Alfine UR700 Hub Dynamo | cycling-not-racing (sevendaycyclist.com) wheel in anticipation- makes switches faster later down the line.  

I also took the opportunity to strip the old girl’s Deore Crankset and trailer wheel, replacing the Peaty’s Speed Grease PEATY'S SPEED GREASE | cycling-not-racing (sevendaycyclist.com) with some Juice Lubes Bearing Juice. A synthetic grease blended specifically for, er bearings.  

It’s thick and tacky, so great for packing hubs, headsets, bottom brackets and pedals. It’s also apparently tested to marine standards (meaning excellent adhesion and sealing properties) and suitable for contact points.  

However, something like Park Poly lube PPL1000 TESTED: PARK TOOL POLYLUBE 1000 LUBRICANT FOR BICYCLES (sevendaycyclist.com) or Peaty’s Bicycle Assembly Grease PEATY'S BICYCLE ASSEMBLY GREASE | cycling-not-racing (sevendaycyclist.com) is a better bet for threaded components. There was a surprising amount of Speed Grease clinging to the Deore axle, and a liberal helping of degreaser was needed to strip it convincingly, too.

Continuing my prevention better than cure narrative, I wanted to get these jobs done before winter got one step ahead.  Right, while I contemplate a chain replacement, I’ll leave you with my review of the Infini Tron Infini Tron Rear Light | cycling-not-racing (sevendaycyclist.com)

Waiting for The Sun

December is dawning and daylight (not to mention dry weather) is at a premium. Perfect conditions for the indoor trainer then. In some senses, yes. However, these contexts are ideal for evaluating product performance. Lights, lubes and waterproof fabrics being the most obvious. A good measure of waxes/polishes, too. https://www.sevendaycyclist.com/naked-bikes-bike-bling

The Pro Viz Men’s Reflect 360+ Cycling Jacket has certainly cut it in the visible and waterproof respects. https://www.sevendaycyclist.com/proviz-mens-reflect-360-jacket

Save for the odd cold night, no sign of the “big freeze” prophesised by the digital tabloid press, so tyre choice remains unchanged.

Having consumed my stash of patches last time round, I wasted no time in putting fingers to keyboard and ordering some more Rema tip top patches. There are cheaper, and I’ve found some store brands refreshingly reliable.

However, I find the Rema that notch higher. Since the Kenda thorn resistant tube was a Schrader valve, I seized the moment, removed the valve core and pumped a liberal helping of latex sealant inside.

Three serviceable spares apiece for my fixed gear winter/trainer and Univega now. Two patches are my cut off point before I consign them to the bin; or repurpose (Protective “boots” for headsets and seat posts, or top tubes being three obvious, bike-specific uses). I have striped and re-greased my fixed gear winter trainer’s headset and added a butyl bottom race boot, for additional protection. Replaced the front brake cable, while I was there.

However, I will often carry one tube with more patches, for dire emergencies, or passing to a stricken rider.

Yes, we should regularly give machines and spares stash a once over. Yes, we should be independent. However, things happen, to the best prepared machines and riders. I have been stuck by the roadside, miles from home. There’s nothing warmer than a helping hand.

Roadcraft seems increasingly patchy and intolerance at an all-time high. Discretion is often the better part of valour. One driver, refusing to recognise my right of way, pulled by and announced, “Roads are for cars bruv!”

Tempting though it was to point out, that roads are for everyone- cars, motorcycles, bicycles, horses, HGV etc…No sense arguing with an ignorant hot head, encased in two ton of steel. Better to ride on, rather than let rip and be rendered paraplegic.

I spent three years battling a Portuguese haulier. One of their drivers crossed into my lane, along the M25 motorway, sweeping my KA onto the front of his 30ton Mercedes. Thankfully I was able to walk away. Death is an inevitability; the phrase “life changing injuries” turns my blood cold. His insurers finally admitted liability, when court papers were served.

I’ve defaulted to the Univega these past few weeks. Primarily, since its dressed for the deluge, not to mention, an increasingly battle-scarred infrastructure. 

Having crossed the 400mile mark with the Weldtite TF2 All Weather Lube, the Univega’s chain was on the cusp of thirsty. I saw this as the first opportunity to evaluate the Juice Lubes Chain Cleaner’s prowess, pitted against a middleweight petrochemical lube, and its modest accumulated contaminant.

Lubes-wise, I’ve switched to the Juice Lubes Ceramic Juice and will see how many miles I can amass, from a single application. It comprises of “blended base oils” and hexagonal boron-nitride.

Lubricant qualities supposedly comparable with graphite. Thus far, it seems slick, refined and tenacious. Its apparently thicker than previous incarnations and feels so. Still light enough for cables and cleat mechanisms.

Talking of which, I’m increasingly endeared to the quirky Look Geo Trekking pedals. These are the baseline models, yet the composites offer excellent support and don’t feel whippy under-load. I’ve also been pleasantly surprised by the ease of intentional release, even using VP and similar pattern cleats.

Critics will suggest there are a wealth of dual sided designs commanding £20 odd, which will do commuting and similar duties perfectly well. In some respects, I’d have to agree. Thinking out loud, I still love Time’s All Road Gripper Pedals. I still have mine and liked the concept. However, their short production run suggests they weren’t overly popular.