Thursday, 19 April 2018

Chopping n’ Changing












At the close of last week, my working fixed was struck with an infuriating phantom squeak. Cranks snugged, tight, stem bolts freshly greased, seat post cradle stripped and lightly greased, chain still sporting a filmy layer of lubricant…Still, something piped up, unannounced, and slightly unnerving.
I had wondered whether the UN55 was beginning to sing its swan song. Some gentle tugging suggested those single-sided Tiagra, pedals might be to blame. Will strip and re-grease, when time presents.
Meanwhile another grope around in the pedal box unearthed two sets of Wellgo RC 713 (Shimano SPDR homages) which feature buttery smooth, sealed bearings. One for the fixed, the others spun aboard my Univega’s cranks.     
Single sided designs aren’t the most obvious choices mixed terrain riding and less practical for click n’ go getaways on the fixed. Not that ground clearance is an issue on either machine but some additional won’t hurt. Could be one of my five-minute wonders…May even go old school, back to some first generation Shimano SPD from 1990. Watch this space…
On the testing front… There’s my test of the Vee Tire Co Baldy https://www.sevendaycyclist.com/vee-tire-co-baldy-tyres  while I rack up the miles on their Zilent cousins and of course, the Soma Supple Vitesse.
150 miles, or so in, and I’m warming to their swift, yet very compliant charms. The ride quality is very reminiscent of tubulars, gripping the tarmac liker a leach, while soaking up those light, washboard type imperfections, majestically. All without the gluing and stitching drama, associated with tubs.  
The unrelenting soggy spell consumed the finish line 1-step in 160miles, which isn’t bad for lube at the lighter end of the middleweight scale. Given the bike was grotty, I took the opportunity to strip the remainder using some neat Crankalicious Pineapple Express.  
I’m revisiting Smoove Universal chain lube to see how it performs in less taxing conditions https://www.sevendaycyclist.com/smoove-universal-chain-lube . We were also very pleasantly surprised by Crankalicious Science Friction ceramic chain lube. https://www.sevendaycyclist.com/crankalicious-science-friction-cera
The frameset’s accumulated filth, easily dismissed with a dilute, though custom variant.
I hold the belief (and, some would say, an almost religious observance) that cleaning is part of riding. To be done regularly and providing surfaces sport a decent quality, protective wax, we’re talking 20-25 minutes start-to finish, no drama.
 Although fighting the compulsion to fettle and tweak, often sees this task expand, to fit the time available...
A few months back, I was looking for an IRO Rob Roy frameset for a single-speed cross project but drew a complete blank. More recently my urges tugged me in the direction of Genesis Day One.
However, these are not available as a frameset option. So I’ve decided On-One’s Pompetamine, complete with disc mounts, is the next best thing. These had a fairly short production run. Bottom line, I’m looking for a sound, if cosmetically tatty example, at the right price. So, feel free to get in touch if you’ve a large, in need of a good home. 
For those of you who’d rather be out riding, Seven Day Cyclist has teamed up with route you https://www.routeyou.com/en-gb/route/view/5046397/recreational-cycle-route/to-tan-hill-and-over-the-stang
A sudden shift to summary weather presented my first opportunity to pluck the Holdsworth from hibernation, for some serious skinny tubed, skinny-tyred fun.  
Swapping hats a moment, models continue to come to me for port-folio building/development. Jersey Jones booked me for a glamour/boudoir session, with a bit of fashion mixed in last week.
Krystal J got in touch to refresh her port-folio. Another really pleasant, 3 hour shoot.  With the wedding season just around the corner, I’m also getting approached in the context of Punjabi and other South Asian events. Contact me (Stenningphotographic@gmail.com) if you’re a model, or bride and want to discuss your requirements.
  

Tuesday, 10 April 2018

Maddening Crowds & Magic Models












 With April turning less austere, I decided it was time to swap the Univega’s rubber. Gone are the Schwalbe active winter, substituted for the equally mighty Schwalbe Marathon GT 365 https://www.sevendaycyclist.com/schwalbe-marathon-gt-365-tyres-in-w . I also switched from the SKS lube your chain https://www.sevendaycyclist.com/sks-lube-your-chain  to Finish Line ceramic wax.
Bombproof go anywhere dependability https://www.facebook.com/Sevendaycyclistmagazine/posts/1885288428168746?notif_id=1523350698147526&notif_t=page_post_reaction&ref=notif  and a super slick, low friction transmission seemed a very alluring combination.

I go through “Garbo” phases of not wanting to speak, or otherwise engage with people, at least in a social context. This very much depends on their energies. Introverted by nature, professionally, I am quite loquacious but require periods of isolation, outside of working hours  to recharge.  
The ability to deviate from metalled roads, be alone with my thoughts and whatever kit I’m playing with, is imperative.
Not that reflecting is wasted time but something, tangibly productive needs to come from it. 400 miles on my beloved fixed gear winter/trainer hence, and I’ve formed my conclusions, where the 32mm Panaracer T-serv PT and Vee Rubber Baldy are concerned. Both are favourable, albeit with different charms.
Verdicts reached, I wasted no time swapping over to the 42mm Zilent and following behind, 33mm Soma Supple Vitesse. These are the EX (Extra wear) tread compound, which as the name suggests, is designed with durability in mind.
Formative (50 mile) impressions are of svelte, grippy and fast rolling rubber, yet with a surprisingly compliant persona. Reminiscent of their Shikoro cousins https://www.sevendaycyclist.com/s  but a fraction friskier. Clearance a bit tighter? The Vee Tire co Rolldiac are another good choice, for general riding and speed-biased commuting https://www.sevendaycyclist.com/vee-tire-rolldiac-tyres   
Just as well, given the pock marked and badly patched infrastructure. I was even greeted with some impromptu “gravel” on Tuesday morning’s escape.  The big, swoopy Soma Condor bars continue to seduce me with their buxom charms, affording excellent control. A little narrower than the midge, and this is apparent when out of the saddle (which is more frequent on the fixed, say powering away from the lights, or along a gradient).
By the same token the Condor feel markedly stiffer, resulting in a tighter feel up front. The build’s portlier tyres, steel frame and carbon composite fork, retain a very compliant ride quality.
I’m often contemplating locations for photoshoots/scenarios. The Univega’s all-terrain persona is perfect for scouting beyond the beaten track. Abandoned buildings make fantastic settings but are fast in decline, thanks to demand for redevelopment. They also present a wealth of potential hazards for models and photographer alike.  
Iconic red phone boxes, most now left for prosperity (or as makeshift urinals for those whose bladders, have reached the 500 odd millilitre capacities en route home from the pub/a mate’s house) have scope for fashion/similar portraiture.
This one was often frequented by yours truly, as a teenager. Calls home, advising of impending lateness, due to a mechanical, or sheepishly requesting rescue. Provided I got through to an Au Pair, not the cat, things were generally fine. Alas, this one’s a bit exposed for anything vaguely arty and though temperatures have mellowed somewhat, the climate is still sketchy for location work.
Hence, I’m busy in the Studio. Here’s a few of Amelia Mary Instagram: @ameliamaryorvis another highly professional and accomplished model. Photographed last week, at Mark Coventry’s Clacton Studio https://www.markcoventry.com/
 

Monday, 9 April 2018

Sinner Revamp

 
We are looking for a carbon specialist to refinish John’s beloved Velomobile body. Ideally, you’ll be based in the midlands and have a 2K paint booth big enough. Colour-wise; John’s looking for a retro-reflective yellow (think the sort of effect used in vehicle licence plates). Feel free to get in touch here, or email Michaelsevendaycyclist@gmail.com  

Wednesday, 4 April 2018

Buxom Bars & Lighter Lubes










These Soma Fabrications Condor flared drop bars arrived among a consignment of delightful Soma goodies. Now, I like big flared drops for cross and other, dirt biased riding. WTB mountain drop and On-One Midge being my two, favourite patterns.
The condor is made from shot-peened 6061 T6 aluminium alloy. I’m deceptively broad across the shoulder for my height and build, so have gone for the extra-large (44/49cm), still slightly narrower than the Midge.
However, the medium is 40/45cm, large 42/47cm. The smaller number denotes the c-c width i.e. measured between the hoods.  Look closer and you’ll notice it’s pattern is a hybrid of riser and compact drop bar.
Now, in common with the other two, the condor’s shallow drop supposedly allows more time riding the drops.  Little surprise that they’re marketed at touring, bike packing and gravel riding audiences.
Apparently, rotating them accentuates certain characteristics to suit personal preference. I deliberately avoided my “Child at Easter” urges to strip and fit, to my fixed gear winter/trainer’s cockpit- immediately.
I had higher priorities and wanted to avoid (a) Rushing the fit (b) forgetting to weigh them and having to strip bar tape, brake levers, lighting and other goodies, later. Soma cite the weight as 320g, ours tipped the scales at 348g.
I’m generally indifferent to black/dun finishes. Thankfully and in common with the WTB, this is a good quality one. The sort that resists accidental marking, say when fitting/adjusting brake levers, rotating them in the stem.
Any adjustment/component change tends to feel different, often an improvement psychologically. Formative impressions are of a higher position, my hands defaulting to the drops, as opposed to cruising atop the hoods.
Not that the oversized midge could be described as springy, However, the Condor’s increased rigidity is very apparent, especially when climbing out of the saddle. Powering up a climb, superior stiffness permits effort to be channelled into cadence, which can make all the difference, when you’re forced to rely on a single gear ratio.
The Condor’s curved, swoopy profiles still offer a reasonable amount of useable parking space for lights, computer, action camera etc. However, the Trelock Ls960i switch https://www.sevendaycyclist.com/trelock-ls960i-dynamo-front-light isn’t oversized. Thus, it needs to sit where the bar narrows and consequently, at a slight angle. Operationally, this isn’t an issue but something to consider, if you’re porting clamps/brackets of similar diameter over.
The inexpensive, though high performing BBB BHT 14 flexribbon gel bar tape https://www.sevendaycyclist.com/bbb-bht-14-flexribbon-gel-bar-tape  could’ve been reused but I had some very fetching Lizard Skins DSP 2.5mm, doing something close to nothing.
They grey swirl effect also compliments the build’s colour scheme handsomely.  A phantom squeak was traced to the otherwise loveable Revolution Ritchey copies, so a quick game of lucky dip in the spares drawer, sees them substituted for these single-sided Shimano PD A520 pedals. Tiagra by another name, these are a sporty platform type. Greater support but without the ground clearance hassles and the versatility offered by recessed SPD cleats.  
Holdsworth aside, all my fleet feature slightly flared drops. This sea change started when I was introduced to the On-One midge back in 2005. This wasn’t love at first feel but within a matter of rides, I was warming to them.
Upgrading to the increasingly standard (oversized) diameter was a good move. The 25.4, though great for drop bar retro mtb builds/conversions, felt whippy by comparison. I sold these on to a good home, 18months back.
Leverage and to some extent control, are the main benefits of a wider/flared bar. Hence their particular appeal, on a rough stuff tourer cum trailer tug. However, they also open the chest cavity, which is quite helpful when tackling steeper ascents, especially on the fixed.
The wild and weird weather hasn’t relented on these shores, which is perfect for testing tyres., chain lubes, mudguards and pretty much anything else, really. Talking of which; I’ve racked up 225 extremely wet miles from a single application of Finish Line Ceramic wet.
 
 
Thankfully, it can be reapplied with minimal prep and without curing period. A definite plus, should topping up be required mid ride, or needing to head out, sharpish. However, since the weather is turning milder, more spring-like, I have switched to Finish Line 1step cleaner and lubricant.

I’ve used its aerosol variant in the past to reasonable effect. Convenience is the main draw. The solvent component will consume any residual chain lubricant (although some stiffer ceramic/wet formulas require a more voracious solvent cleaning first).
When this evaporates, the low friction lubricant layer is left behind. Aerosols use a solvent to make them sprayable, coupled with a butane propellent. Great for channelling it into those hard to reach areas, such as sticky mechanisms/cables, or even loosening rusted/lightly corroded contact points.
The bottle version requires a swift shake to mix the formula and chains a quick wipe afterward. Despite being a dropper type, the super runny mixture means it will go everywhere and is best deployed using their no drip chain luber. Doubling up i.e. leaving it a few minutes between coats, adds a more substantial and ultimately durable layer.  
Forget about cheeky topping up indoors, for this and very flammable, reasons. If you have pets, or small children, wash down any residual stuff too. While cats in particular, will give anything noxious, or petrochemical based a wide berth, they can still succumb to poisoning. The most common cause being traces of product sticking to their fur. Cats will lick this, ingesting the poison and can be fatal.    
I found the Crankalicious pineapple crush concentrate, agitated with a stiff bristled brush perfect for speedy dismissal.    
Looking forward to bringing the Holdsworth out of hibernation over the coming weeks. Feeling the need for some serious, flat out, point to point blasts.
 

Monday, 26 March 2018

Concentrates & Curmudgeonly Cats










This bottle of Crankalicious Pineapple express concentrate arrived while I was on a photoshoot with Marie https://www.facebook.com/mariemeggidoartist/. Bike washes are one of those products that polarise opinion and I personally prefer concentrate versions. Why? Well; they allow me to brew custom strengths and work out considerably cheaper, too.
Gentle for bike washing duties, neat for stripping lubes and greases with minimal effort. Again, there are several approaches to this. Chain baths are nice, in that they keep mess minimal and allow solvents/cleaners to be reclaimed, if appropriate.
My approach, is closer to that of old school team mechanics. I pour about 100ml of solution, into an old, cut down trade bottle and apply this directly to the chain, rings, cassette etc via “pound shop” paint brushes.
Drivetrain stripping tends to be the precursor to bike washing, removing the grotty stuff-so there’s no issues with cross contamination later. In the zone, a good, basic clean shouldn’t take more than 20minutes.
Maintenance should not be regarded a chore, rather part of riding. Some describe it as bonding, others in more rational terms. A means of inspecting everything, minimising the likelihood of problems occurring during a ride, let alone, racing.
Little and often saves a lot of time in the long run. If you’re someone who leaves servicing to your friendly local bike shop, they will appreciate working on a clean bike. This makes their job easier, which saves you time and ultimately money, in the longer term.
There’s been plenty of scope for testing washes these past few weeks. For these reasons, I’ve been extending maintenance periods to see how they tackle impacted grime, whether organic, or petrochemical.  https://www.sevendaycyclist.com/sks-wash-your-bike
Similarly, when testing tyres (which we regularly do at SDC www.Sevendaycyclist.com and other titles, I freelance for). During these phases, I deliberately resist the urge to brush casings of glass, grit and similar objects to test puncture resistance.
Road tyres, at least those for general riding have become portlier.
Time was when we’d commute, or winter train on 700x25/28c. Now, thanks in part to the evolution of ‘cross and gravel type builds with generous clearances, 32mm upwards is increasingly the norm. I used to tour on 32mm and these days, prefer something around the 35mm mark for general riding.
All things being equal, they’re reasonably swift, ride quality is more compliant, taking the sting from washboard surfaces. Ultimately, less rider fatigue, especially at the end of a long ride.
Working bikes, however they earn their keep, need to be dependable. Unable to finish a race/big ride; or turning up late to work because of a mechanical is deeply undesirable.
Hence, reliability trumps weight saving in these instances. Season specific equipment, such as light aside, I enjoy night testing. I find the darkness useful, adding another perspective when evaluating performance.
Decent technical clothing enables me to forget about the weather and enjoy the ride, is that tyre superior/inferior to a competitor. Is this so, or is perhaps, visual prejudice skewing my perception?
Plunge yourself into darkness and see… https://www.facebook.com/Sevendaycyclistmagazine/videos/1868668746497381/  Ever noticed how climbs become less taxing in the dark?  Night will open a completely different riding experience, go-on, embrace it.
My slightly tyrannical, though much loved feline, can also object profoundly to some equipment…
He’s very taken with my waxed cotton messenger bags, commandeering them as his bed. However, he can launch savage assaults on test tyres and I’ve often discovered a phantom flat.
Often there’s a very rational explanation- I’d pinched a tube/rim tape moved when mounting, or indeed, a sharp lodged in the casing, following a very wet ride.
However, our furry friends can be very sensitive to very subtle changes and different odours. The latter may explain his recent hostilities towards these very likeable Panaracer T Serv PT, yet not the Vee Tire Co Zilent 700x42c.
Talking of punctures, the Soma Shikoro have finally succumbed to a sharp, which I only discovered while washing the bike down. This presented the ideal opportunity to swap over to the Vee Tire Co Baldy. Another 32mm section, and an interesting comparator for the Panaracer.
Another plus, it compelled me to root through the spare tube mountain, identifying those which can re-join the wedge pack and those for recycling. 
 

Sunday, 18 March 2018

Pest from the West












No, not that one.Tthankfully, after several years, she appears to have finally accepted her approaches are unwelcome, and non-reciprocal.
 
Serial, uninterrupted monogamy is, in my experience, often practiced by those who don’t want to work on themselves. Moving from one partner, without taking stock and investing in yourself, is an avoidance strategy.
Each relationship inevitably fails because the other, unwitting party cannot fix them. So, they move to the next and this cyclical shift perpetuates. A complete waste of time, emotional and monetary reserves. We all have our lessons to learn. Some choose not to.
I am referring to the persistently wet/windy weather front. One that has compelled me to tolerate a filthy fleet. On the flip side, during drier spells, let alone brief periods of sunlight, I’ve been testing the mettle of assorted bike washes.   
Crankalicious ceramic chain lube arrived at SDC HQ and was passed to Steve, esteemed co-editor and touring aficionado. However, the fixed’s links looking distinctly thirsty, prompting the introduction of some Finish Line Ceramic Wet. I’m reasoning this will be an interesting comparator and in ideal testing conditions.
Bucking the trend for curing periods, both are pour, wipe and scoot off, which is welcome when time’s not on your side. Elsewhere the SKS lube your chain formula is also going strong, 180 harsh miles hence. It looks a filthy, congealed mess but I’m assured this is locked in the top layer and not chewing components.
The Schwalbe Active Winter https://www.sevendaycyclist.com/schwalbe-winter-spiked-tyre  remained in situ on the Univega, given further snow was forecast. I wanted the option of getting some miles in, regardless. https://www.facebook.com/Sevendaycyclistmagazine/posts/1863791363651786?notif_id=1521379387031484&notif_t=page_post_reaction&ref=notif  Another title I freelance for, have sent me these Panaracer T-Serv PT Folding 700x32C.
Vee rubber have also sent me their 700x32 Zilent and and their 42mm Baldy. Will be interesting to see how the latter compare, speed-wise with Maxxis Roamer https://www.sevendaycyclist.com/maxxis-roamer-tyres  
These, as their name implies; are aimed at the urban market Soma Shikoro https://www.sevendaycyclist.com/s , are my favourite big(ish) section all-rounders Quick acceleration, smooth passage over lumpy sections, at 464g apiece, they’re a little heavier than the Panaracer (As you’d expect. However, they’re also made, under licence, by them).
Over the years, I’ve hustled around the capital on everything from 20mm to 2.1 inch, generally settling for 26x1.5 (or thereabouts) due to their balance of speed, comfort and control across badly surfaced, glass strewn tarmac. Otherwise; 32mm was my default for touring and general road biased riding.
It was also the biggest section many 80’s touring bikes could swallow without fouling; or forgoing full length chrome plastic mudguards. Personally, I’m happy to leave fag paper clearances and toe clip overlap in the dim and thankfully distant past.  
With this in mind; there are some frames, components and other, unrelated objects I’d like to own from this and other eras. At the right price… Some would argue that Nostalgia’s true power is the commodification of emotions, those we attach to objects.
Subjectively, a MK III Norton Commando is a nice motorcycle. However, its outclassed, totally eclipsed by modern machines. Therefore, I wouldn’t entertain the £20,000 “market value”, nor would I’d pay fancy prices for air cooled type 1, 2 and 3 VW cars.  Yes, I am fond of them but regard these things as working vehicles, not museum pieces. The same applies to my 1991 road bike, aka “The Teenage Dream”.
A fair-weather machine but a bike ridden in fair weather, nonetheless. It’s fun to ride yes, there’s a deep sentimental bond and no I wouldn’t willing   part with it. That aside; I certainly wouldn’t pay some of the prices I’ve seen comparable machines being offered for.
Another, arguably more positive/optimistic account of nostalgia, is that it (according to Sedikides and Wildschunt) “Is shown to be both a driver of empathy and social connectedness, and a potent, internal antidote for loneliness and alienation”.
Indeed, Sedikides suggests nostalgia is the “perfect internal politician, connecting the past with the present, pointing optimistically to the future”. Whatever your particular perspective may be, its food for thought. I’ll leave you with a few shots from my booking with Louise, a delightful ballet/dance and lingerie model.