Meaner Season

Autumn has progressed, with a much wetter flavour. Local authorities/highways departments are scrambling to patch battle-scared tarmac, while climate, conditions and budgets permit.

Temporary traffic-light control; raised ironworks and roughly lain tarmac is certainly testing rider skill, wheel build quality and tyre casings. 15 months on, my Halo White Line/Shutter Precision PD8 dynohub build https://www.sevendaycyclist.com/halo-rim-and-shutter-dynohub-disc-b   could do with a quick tweak of its spoke tension.

John Moss (who built the wheel) has kindly offered to whip it on his jig, while I’m on an East Midlands mission. I’ll swap over to the Halo Evura/SL9 https://www.sevendaycyclist.com/halo-evura-shutter-precision-sl9-dy  for a couple of weeks (and may take that route). I’ve switched to my Univega and getting some serious mileage on those Schwalbe Marathon Mondial tyres.

These continue to impress with their smooth, compliant personalities. On and sans asphalt. True, they have a puncture repelling rating of 6, whereas the 365’s are 7. However, rolling resistance is vastly superior, and I’ll be very surprised should I flat in the coming months.    

The “Motor Oil Challenge is working out, as I envisaged, 200 miles in. So far, a decent amount of 5w40 still clings to my fixed’s stainless steel chain. I’m anticipating at least 400 before replenishment’s required.

My Univega’s electroplated chain is more accommodating of lubes generally, so I’m wondering if I can sneak past the 500mile mark, on a single helping. Assuming a 9/10spd chain is good for 1100 miles, potentially two helpings of motor oil could last its lifespan. River riding, snowy, slushy conditions will put a dent in this, dictating more frequent top-ups.

Of course, price is not the only determinant when considering lubricants. I’m particularly fond of waxy ceramic types, which, when cured, are relatively dry to touch and generally maintenance free. Much nicer, when tackling a rear puncture/similar road/trailside mechanical.

I’m firmly of the little n’ often approach when it comes to maintenance and servicing. Tuning and replacing stuff as I go, rather than having set schedules. Nonetheless, I always ensure seat posts, headsets and pedals are liberally greased-twice yearly. Not to mention those little fasteners- mudguard, rack and bottle bosses.  

As we hurtle closer to winter, I’m thinking of retiring my fixed gear winter/trainer’s stainless-steel chain. Leaning toward something galvanised…May even plump for another, slightly lower fixed sprocket. Note to self…Remember to baste the hub’s threads with a luxuriously ceramic, grease!

Lithium based preps, commonly used in automotive contexts, are cheap and fine, if mating metals of similar parentage i.e. steel with steel, 7005 series aluminium alloys etc. Problem is, they’ll gobble rubberised components, including seals.

I much prefer a stout ceramic, such as White Lightning Crystal grease. https://www.sevendaycyclist.com/white-lightning-crystal-grease  Green Oil Eco-Grease https://www.sevendaycyclist.com/green-oil-ecogrease-long-ter-test  is a surprisingly stocky, non-toxic alternative.  Staying prowess is good. I’m happy using it on contact points and indeed, headsets/bottom brackets, provided the bike(s) in question are running full-length mudguards.   

Reliability and convenience are key, when it comes to enjoying winter. Treating framesets and components a liberal waxing and treating bikes to weekly sudsy bucket washes (cold water rinses first, to remove road salt and similar caustic stuff) is another sound idea.

This will lock the elements out, making it harder for gloop to stick and subsequent washing easier. Time poor riders, may find a system, such as Green Clean MX is the way forward https://www.sevendaycyclist.com/pro-green-mx-triple-pack These are also available singularly, and I’m particularly endeared to the Cycle Shine. This can be applied to a freshly washed (and rinsed) bike. No buffing or polishing required, simply allow it to cure naturally.

Post wash; quick squirts of “maintenance” spray, to cables and mechanisms, should keep them happy and dependable. Not everyone has time, or the inclination to do their own maintenance/servicing.

That’s when a good mobile mechanic, or local bike shop is worth their weight in gold. If you’re in the Tendring area, Justin Burls now offers servicing and repairs, alongside his bespoke titanium bikes/framesets http://www.burls.co.uk/sandr.html