Wednesday 15 March 2023

Cagey











 This Super Sparrow lightweight thermos bottle arrived and having established incompatibility with broadly standard, composite cages, I decided it was time to revisit Ursula’s downtube setup. I’d gone for the Fidlock Magnetic bottle holder TESTED: FIDLOCK MAGNETIC BOTTLE HOLDER AND BOTTLE (sevendaycyclist.com) and popped a chain checker there- a talking point for some, while still leaving me scope to mount a couple of composite cages on the underside and seat tube.  

This didn’t overly impair my ability to carry water/similar fluids. Now, I’m very fond of the Topeak Modula XL and the now discontinued BBB Fuel Tank XL LONG-TERM TWELVE MONTH TEST: BBB FUEL TANK BOTTLE CAGE (sevendaycyclist.com) cages, since you could whack a 1.5 litre bottle of mineral water, or indeed a similar soft drink in situ, without fear of their ejection (or indeed, knackering a traditional cage).  


However, they will often prevent mounting one on the seat tube. The Free Parable Monkkii Cage FREE PARABLE MONKII CAGE REVIEW (sevendaycyclist.com) is another useful choice, provided you’re not lugging too much weight. 1.2 kilos (as distinct from the 1.5 kilos cited) which should entertain a full 750ml (about 25.36 oz) flask or bottle. An obvious “from the box” solution. I’ve hauled disposable Argon/Co2 welding gas bottles in them, although placed some bubble wrap between cage and bottle to rule out any potential dings in Ursula’s down tube.  


However, to my astonishment, both the BBB and Topeak were too roomy to hold the (bottle) securely. After some rummaging through the cage stash, I whittled it down to a Van Nicholas titanium (Elite Ciussi pattern), a side entry Zefal and this Boardman winged carbon fibre design.  


Lo and behold, the Boardman wonThe main issue with the 6061 and Ti models boiled down to scratching the bottle’s finish. I’d bound some old bar tape around the Van Nicolas and strangely enough, that spark of inspiration proved fruitful.  


Then, along came this Topeak Modula Java.  

It’s an adjustable composite model, which on paper should lug the thermos in question without missing a beat, or launching it mortar style at the first hint of lumpy trail. I also received the brands’ Gravel 2 Stage Mini Pump, which as the name might suggest has two modes- high volume and high pressure, so you can recover from a flat efficiently.  


90psi is top whack but aluminium construction bodes well for longevity and means it stands a sporting chance of hitting these pressures. In some respects, mini and midi pumps have ruled the roost for good reason. Aside from supporting a clean aesthetic, being stashable in a jersey pocket, or bigger wedge pack means the valve end needn’t get caked in crud.  


Many road-biased riders use Co2 as their first line of defence, pump second. Makes sense, especially if you’re needing lofty pressures, although bear in mind you will need to reinflate given though Co2 will rescue you, it will escape butyl much faster, so expect to be busy with a track pump the next day, as they’ll be close to pancake flat. Many mini-pumps will genuinely achieve road realistic pressures too, although, around the 100psi mark, my biceps have felt close to comedic explosion.  


I still have firm fondness for Lezyne Micro Floor Drive HVG (High Volume) and high-pressure models, which resemble track pumps that have been put through a matter-shrinking device. CNC machined construction marries strength and great looks but they’re around 216g (including mount) and on mine (c. 2015) their composite mounts felt a little whippy, meaning the head could rattle against the seat or down tubes “Woodpecker” fashion when riding across washboard tarmac and of course, dirt roads.  


Placing “helicopter” tape, such as this Zefal Z Armor ZEFAL SKIN ARMOR ROLL | cycling-not-racing (sevendaycyclist.com)  over those areas of the frameset will deaden this, while protecting it from potential finish damage. Talking of protectants, I’ve been pleasantly surprised by how well the Weldtite Rapid Ceramic restored the anodised finish on Ursula’s faithful Lezyne Tech Drive HP pump   

 

In my book, frame fit pumps still have their place and hugely different from the giveaway models sold with complete road and touring bikes 20-30 years ago. The sort that might deliver 60psi with herculean effort before locking out uselessly, or worse still succumb to a bent piston.  


Steve and I are very fond of the Zefal HPX High Pressure Frame PumpZEFAL HPX HIGH PRESSURE FRAME PUMP | cycling-not-racing (sevendaycyclist.com)  and I find them aesthetically pleasing on an older steel-tubed road/touring build. These tend to be Presta but could tackle a Schrader valve, more commonly found on trailers/tagalongs with an adaptor, like that belonging to the Merida multi-tool I’ve resurrected.  


Then of course, there’s the Specialized that I acquired back in the late 90s and ultimately euthanised itself beneath the wheels of a passing double-decker London bus. I was offered one recently that “appeared to be working” and mine for £44. I laughed like a hyena and went about my business. In common with Kirk Precision framesets and of course, Specialized’s Rock Combo, I’d give it a loving home but not paying fancy prices.  

No comments: