Misty Mornings

 

Navigating the backroads at 5am is like riding through pea soup and can play all sorts of tricks on an active imagination. Mercifully, the closest I’ve come to demonic hounds, or werewolves are speeding muntjac, deer but ideal conditions for evaluating lighting-and my reflexes!  

While it has some definite quirks, the Ravemen TR50 USB Rechargeable rear light is surprisingly potent, especially in the highest, 50 lumen flashing mode.  

This has sufficient bite to burn through dense coastal mist and doubles as a decent daytime running light. True, it doesn’t match the Knog Cobber Mid Rear Lights’ https://www.sevendaycyclist.com/knog-cobber-mid-rear-light knockout punch. High flash and pulsing produce 150lumens apiece and are relatively frugal-especially in the flashing mode.  

The Cobber’s curved optics, not to mention 192 diodes also mean its peripheral reach is considerably better.  Nonetheless, it needs four hours charge time and is almost twice the TR50’s asking price.   

The highest setting has exceeded cited run time by a few minutes, although the auto kickdown to fast flashing doesn’t last long (around 15 minutes) before shutting down. A consideration, rather than a deal-breaker but I’m always inclined to run a backup light, regardless.  

Flash flooding and thunderstorms have tempered the recent heatwave, hence my lube switches.150 miles in, formative impressions of the Muc-Off –50 lubricant are also very favourable. Not dissimilar to the Weldtite TF2 All Weather Lubricant https://www.sevendaycyclist.com/weldtite-tf2-performance-all-weathe in terms of lubrication and cleanliness. I have high hopes for its corrosion resisting properties, too.  

Similar viscosity also lends itself to cleat/mechanisms and even cables, although a dry wax such Weldite Ultra Dry Chain Wax https://www.sevendaycyclist.com/weldtite-tf2-ultra-dry-chain-wax is, my preferred option for cable inners. In this context, there’s no need to observe the long curing period, although it will last a good while longer if you can.  

Half link chains, like a lot of things, divide opinion. Personally, I’m a fan. They were a popular way of addressing chain tension issues, especially on fixed gear conversions with vertical frame ends. Much less of a challenge on a purpose build frameset using track ends.  

During a quiet moment, I chose to substitute my fixed gear winter/trainer’s Sram PC1 for this KMC HL1 Wide. As the imaginative moniker suggests, it’s a hefty, nickel-plated ½ link, direction specific model. Easily cut and joined using this trusty Topeak All Speeds Chain Toolhttps://www.sevendaycyclist.com/topeak-all-speeds-chain-tool.  

 

Refined and super smooth, I’m wondering how the HL1 will compare with my all-time favourite, the KMC Z1x https://www.sevendaycyclist.com/kmc-inox-chain (save for the tendency for lube to migrate from the rollers to the outer plates). Talking of which, I’m going to leave it dressed in the factory lube for the time being, since it's there, although being quite contrary in these matters, I might well change my mind.  

Talking of electroplating, while on a mission of mercy, I exhumed this seven-year old, 20 function BBB Microfold XXL from the recesses of my car boot tidy. I always some tooling there in case I need to fettle a friend’s bike while visiting, or in case someone is stuck by the roadside. 

Now out of production, said tool is anything but obsolete and has some nice touches. Curious? OK, T25 Torx, spoke wrenches (3.2, 3.3 3.5mm), tyre lever, chain hook, chain tool, chain pin tool, 2, 2.5, 5, 4, 5, 6, 8mm Allen keys, 8, 9, 10mm Box wrenches, Phillips and straight blade screwdrivers. By the look of things, I may have lost the 8mm cap but otherwise, it’ll cater for most eventualities and is surprisingly pleasant to use, thanks to the rubberised coating.  

I was somewhat stunned to discover the plated tooling had cultivated some unsightly, barnacle-like tarnish. This presented the ideal opportunity to test the cutting prowess of this M16 Ride & Shine. The chemical abrasives did a decent job of removing the lions’ share within 20minutes, albeit with a little help from a flat-file. Apparently, the Ride & Shine leaves a protective barrier behind, so we’ll see how effective that is... 

 

Reportage!

The 32gb Micro SD card’s arrival coincided with my own, somewhat reluctant return from the marvellous midlands…

K-Edge and modified Delkin Brackets seem to be doing their thing handsomely, although given the levels of distortion, I’m now convinced resin handlebar tidies/extension beams aren’t ideal platforms. Thankfully the padded leather bar wrap proves a better host. In any case, I picked up a model specific helmet kit while mooching around Decathlon on Friday evening.

This present spec would bring the total cost to around £150, though includes the biggest card possible, some lateral thought and experimentation. Like the idea of a plug in LCD screen but this is a luxury for another time-if at all.

I

mage and build quality continue to impress and functions are intuitive, allowing easy operation, even when hurtling into hairpin descents. However, I need to resolve low-level vibration before its true potential is realised, or anything serious committed to you tube.

Talking of tubes, the resin end of my uber long workshop tyre fitting wand mysteriously fractured, so I contacted Cyclo’s distributors, seeking to purchase a replacement directly.

Despite being a couple of months outside of warrantee, Weldtite kindly sent me another free of charge along with some other “taster” products. A lovely gesture and means I can resume effortless tyre (or indeed, tire) swapping.  www.weldtite.co.uk

Elsewhere, we’re reaching the penultimate stages in our collaboration, so hopefully herculean effort will translate into tangible reward very, very shortly.