Showing posts with label 1980s components. Show all posts
Showing posts with label 1980s components. Show all posts

Tuesday 13 April 2021

Wax, Wheels, Caps & Brexit Bite















Easter’s bitterness has given way to fluctuating temperatures, so I’ve switched the wardrobe around a bit. ¾ lengths and shorts have been making appearances and I’ve switched to summer-weight caps, socks and gloves. Models such as this Buff Pack BUFF PACK BIKE CAP | cycling-not-racing (sevendaycyclist.com) wick faster, which is also helpful when conditions turn showery.  

A decent peak will also protect the eyes and face from the sun, blustery winds, and airborne particles. April’s changeable nature means I’ve been sticking with photochromic eyewear, which adjusts to different light progressively and accurately. This eliminates any need to switch lenses should strong sunlight give way to dull and overcast conditions. Liner-type gloves are another useful bridge between seasons, although look for those with some form of palm padding. I’m still very fond of these Specialized, which sport nice ulnar defending detailing.

 

The Bat wax is also notable for its cleanliness and staying prowess. Admittedly, I've not encountered monsoon rains (but few people would go the wax route, knowing this was forecast). However, it seems temperature stable. I was surprised to learn 'it's a synthetic wax employing a water-based carrier. The synthetic particles are apparently more tunable, hence it’s a thinner layer, which attracts less dirt, whereas old school formulas tend to trap the grit in the top layer and eventually flake away, leaving a thin lubricant layer behind.   


Clean drivetrains are good practice full stop. Essential when switching between lubricants, especially those of different genres. Wax formulas ae particularly sensitive to any pre-existing lubricant, especially petrochemicals. My fixed gear winter/trainer’s drivetrain being a case in point.  


I had treated it to a good, but not meticulous clean, hence why the Univega’s transmission remains pristine, and it quickly assumed a superficially scuzzy state. Deep cleans are essential when fitting fresh chains, especially if you are opting for something water/emulsion-based.  


Otherwise, the pre-existing layer will simply float the wax away. Having established this was just unsightly and wasn’t impairing performance, I removed the drive side cranks and treated the ring and chain to a liberal helping of degreaser. In this instance, I reached for Squirt Bike Cleaner Concentrate SQUIRT BIKE CLEANER CONCENTRATE | cycling-not-racing (sevendaycyclist.com) and chased any residual with Pure Bike Degreaser PURE BIKE DEGREASER | cycling-not-racing (sevendaycyclist.com) 


I was surprised by the glaze of impacted, matted ceramic and wax formulas clinging to the Genetic Tibia ring GENETIC TIBIA TRACK CRANKS & RING | cycling-not-racing (sevendaycyclist.com) but this combination stripped it bare, with some gentle agitation and a liberal, warm water rinse.  Steve has been quite impressed with Muc-Off Bio Degreaser MUC-OFF BIO DEGREASER | cycling-not-racing (sevendaycyclist.com)  


Dried, refitted and tension tweaked, I applied another helping of Bat Wax and left curing for seven hours, before popping out for an evening blast. I’d passed the 250mile mark on Ursula before things turned a bit filmy, so just added another light coat, put the old girl away and then left the Bat Wax curing for another 24 hours. Drizzled a couple of drops on the cleat mechanisms and the Kinekt 2.1 Seatpost’s moving components KINEKT 2.1 SUSPENSION SEAT POST | cycling-not-racing (sevendaycyclist.com), since I was there, and the post was emitting a very subtle squeak.  


Decided it was also time to do some refurbishment of the Teenage dream’s wheelset. Nothing major, since they are basically true (although would benefit from a wheel builder’s touch) and have seldom seen wet roads these past 30 years. 

 

However, I’d need to whip the freewheel and I may as well strip and regrease the Athena hub, while I’m there. The freewheel was caked in a waxy glaze, which was useful enough protection in storage but looked scuzzy, so dismissed and I treated the freewheel to liberal helpings of heavy-duty PTFE lube, while I wait for the Park Tool FR4 freewheel removal tool to show up.  


Thanks to the combination of Covid 19 and Brexit, stocks are low, and the original, proposed supplier was talking in terms of 5-6 weeks lead time. Another says two weeks, so I’ve gone that route. These long lead times are also affecting other industries- replacement car components being one of them. Particularly (although not exclusively) those for European marques. Then, of course, there are additional tariffs, likely arising from the UK’s hard Brexit- an unwelcome double whammy.  


That aside; nice to see that Park still offers one, since while fond of retro, I’m not paying fancy prices. That goes for cars, motorcycles, cameras too.  I’m very attached to the “Teenage Dream” and it’s still a joy to ride, but quaint by contemporary standards. Ah but while the nostalgic is misguided and arguably unable to embrace the future, the cynic knows the price of everything and the value of nothing...