Showing posts with label binder bolts. Show all posts
Showing posts with label binder bolts. Show all posts

Wednesday 25 November 2020

Fine Tuning, Neurosis & Touch Ups











 November nearing its swansong and its remaining unexpectedly mild (save for a few, very cold starts). Strange then, that I should switch to the FLR Defender Winter Booties. However, UK winters err on the wet, rather than bitterly cold and I also want to see how they regulate temperature in milder weather. Before I went into temporary exile, I collected some packet fresh consumables, including these Look Cleats.

Marked “Easy Release”; these follow the Shimano SPD pattern and came with the Look Geo Trekking Pedals I was testing this time in 2019. Since the Shimano and Wellgo bolted to my shoes were fully compatible, I had put the Look on ice. In my experience, even the more basic patterns return a decent mileage. However, they tend to expire at the least convenient moments, especially in winter.

I introduced these with the Zefal Extra Wet Nano Ceramic Chain Lube. Grease is more stoical but heavier duty wet lubes make convenient and passable substitutes. Just remember to strip and re-lubricate more frequently-at least every three months. Otherwise, you’ll be reaching for penetrant sprays, or resorting to more extreme measures, such as drilling them out…

The thicker soles common to this genre of boot may mean raising the saddle a few millimetres to compensate. I chose to perform this move post-ride and the binder bolt chose that precise moment to expire. Being specific, it seems the collar’s aluminium thread had stripped its threads at a crucial point.

The balance of blame lies solely at my door-overtightened due to neurosis and forgoing a torque wrench. Thank heavens for the internet and next day delivery.

Given this incurred a £4 charge, I decided to buy two of these Brand X (one as a spare, just in case. I also have a blue Salsa lip-lock in storage). Muc Off Mechanics Gloves MUC-OFF MECHANICS GLOVES | cycling-not-racing (sevendaycyclist.com) donned, I gave the frame’s seat tube a quick blast of maintenance spray, gently splayed the clamp and eased it in situ.

The former added some slip, thus reducing the risk of scratched paintwork. Treated the post to a quick lick of Muc-Off Bio Grease TESTED : MUC-OFF BIO GREASE (sevendaycyclist.com)  since I was there, reinstated everything and snugged the collar bolt tight, resisting any neurotic urges.

Though the Univega’s Interpon 601 powder coat cream finish After The Gritters Went Home | Seven Day Cyclist is incredibly tough and well applied, it’s not completely bullet-proof (no finish is) and there are a couple of small chips.

One along the chainstay and another on the right-hand seat stay. My initial drift was towards Revel/Humbrol type hobby enamels but these looked to be a shade or two out, which is no use. I’d be better off applying a primer coat to protect the metal and waiting for the right match. As I was wandering around the web for something else, a 30ml RAL9001 cream bottle turned up at a very keen price, so I wasted no time in buying.  

Curing times are cited as being 2hours between coats. Two or three thin coats are always better than a single, thick one. Wherever possibly, leave these overnight and then add subsequent coats the next day. Ideally, leave a further 24hours. In short, best done during a time when that bike is enjoying some well-deserved rest.

Elsewhere, the Zefal Z Adventure Z5 continues to impress with its blend of rugged, motion free tenure and simple, sturdy mounting. Steve’s also been impressed with the BTR Water Resistant Handlebar Bag BTR WATER RESISTANT HANDLEBAR BAG | cycling-not-racing (sevendaycyclist.com)  

I’ll close this entry with some photos of my thankfully, temporary exile…Better organise some bike storage for my new permanent home, before demand spikes and delivery times extend, given the seasonal rush.    

November nearing its swansong and its remaining unexpectedly mild (save for a few, very cold starts). Strange then, that I should switch to the FLR Defender Winter Booties. However, UK winters err on the wet, rather than bitterly cold and I also want to see how they regulate temperature in milder weather. Before I went into temporary exile, I collected some packet fresh consumables, including these Look Cleats.

Marked “Easy Release”; these follow the Shimano SPD pattern and came with the Look Geo Trekking Pedals I was testing this time in 2019. Since the Shimano and Wellgo bolted to my shoes were fully compatible, I had put the Look on ice. In my experience, even the more basic patterns return a decent mileage. However, they tend to expire at the least convenient moments, especially in winter.

I introduced these with the Zefal Extra Wet Nano Ceramic Chain Lube. Grease is more stoical but heavier duty wet lubes make convenient and passable substitutes. Just remember to strip and re-lubricate more frequently-at least every three months. Otherwise, you’ll be reaching for penetrant sprays, or resorting to more extreme measures, such as drilling them out…

The thicker soles common to this genre of boot may mean raising the saddle a few millimetres to compensate. I chose to perform this move post-ride and the binder bolt chose that precise moment to expire. Being specific, it seems the collar’s aluminium thread had stripped its threads at a crucial point.

The balance of blame lies solely at my door-overtightened due to neurosis and forgoing a torque wrench. Thank heavens for the internet and next day delivery.

Given this incurred a £4 charge, I decided to buy two of these Brand X (one as a spare, just in case. I also have a blue Salsa lip-lock in storage). Muc Off Mechanics Gloves MUC-OFF MECHANICS GLOVES | cycling-not-racing (sevendaycyclist.com) donned, I gave the frame’s seat tube a quick blast of maintenance spray, gently splayed the clamp and eased it in situ.

The former added some slip, thus reducing the risk of scratched paintwork. Treated the post to a quick lick of Muc-Off Bio Grease TESTED : MUC-OFF BIO GREASE (sevendaycyclist.com)  since I was there, reinstated everything and snugged the collar bolt tight, resisting any neurotic urges.

Though the Univega’s Interpon 601 powder coat cream finish After The Gritters Went Home | Seven Day Cyclist is incredibly tough and well applied, it’s not completely bullet-proof (no finish is) and there are a couple of small chips.

One along the chainstay and another on the right-hand seat stay. My initial drift was towards Revel/Humbrol type hobby enamels but these looked to be a shade or two out, which is no use. I’d be better off applying a primer coat to protect the metal and waiting for the right match. As I was wandering around the web for something else, a 30ml RAL9001 cream bottle turned up at a very keen price, so I wasted no time in buying.  

Curing times are cited as being 2hours between coats. Two or three thin coats are always better than a single, thick one. Wherever possibly, leave these overnight and then add subsequent coats the next day. Ideally, leave a further 24hours. In short, best done during a time when that bike is enjoying some well-deserved rest.

Elsewhere, the Zefal Z Adventure Z5 continues to impress with its blend of rugged, motion free tenure and simple, sturdy mounting. Steve’s also been impressed with the BTR Water Resistant Handlebar Bag BTR WATER RESISTANT HANDLEBAR BAG | cycling-not-racing (sevendaycyclist.com)  

I’ll close this entry with some photos of my thankfully, temporary exile…Better organise some bike storage for my new permanent home, before demand spikes and delivery times extend, given the seasonal rush.    

 

Friday 13 December 2013

Coming Together






The kind folks at Ison distribution www.ison-distribution.com generously dropped me two of these lovely Genetic (Campag homage) seat post binder bolts yesterday (19 and 22mm just in case). Seizing the moment, I gently manipulated the frame’s ears, applied some composite friendly grease to bolt and post before introducing said components at their correct nm. Some folk still regard torque wrenches as a new-fangled luxury but in my book, lying prone in A&E while an overworked and undervalued nurse plucks shards from one’s buttocks is extremely undignified and totally unnecessary. Emblazoning my moniker along its top tube, fiddly bits are finished and with freshly herded goodies, my ferrous friend can resume secure hibernation until spring while I address pressing business matters and chart long, slippery outings aboard suitably dressed Ilpompino and Univega.

The deskilling debate has been hotly contested in many quarters with equally compelling contradiction. Traditionally this has referred to the labour market, primarily in relation to automation and manual labour. However, it appears increasingly prevalent in other spheres. I was somewhat gobsmacked to hear a police (traffic) officer remark that once someone has successfully passed their driving test; they are by default competent and capable users of the public highway (!) This contradicts widespread driving instructor/examiner conviction that such assessments are simply to ascertain someone is safe to be allowed to operate said vehicle(s) unaccompanied.

London’s seamier districts have always been awash with the unlicensed/uninsured and otherwise illegal drivers. However, toward the end of my twelve years spent navigating the capital on two-wheels, standards of PSV (Public Service Vehicles) operation had become obviously dilute to counteract declining numbers. This new breed of operator often substituted skill and courtesy with a deadly cocktail of elephantine ignorance and aggression toward smaller craft. I even recall the story of one, high on cocaine and deciding his passengers would benefit from a more scenic commute through suburban Kingston-Upon Thames (!)

Far from engaging “Victim” mode, I’m advocating for the re-establishment of “Road craft” whereby we have a collective responsibility to adopt a sense of greater humility, while continuously developing our skills and shedding this corrosive them/us tribalism. Aside from the (very real) fear of their driveway resembling a motorcycle salvage yard, my parents weren’t the least bit hysterical about a strange and irrational interest in middleweight motorcycles running in parallel with that of lightweight bicycles. Rather, they preferred to stress the importance of having a car licence-if for no other reason than to appreciate driver perspective and therefore, perceive potential hazards before they arose. Bottom line, I’m pro cycles but only have a pronounced allergy to stupid/ignorant/myopic humans, whether they be commanding car/van/bus/truck/horse/yak or indeed motor/cycle.

Against this backdrop, I am slightly perturbed by the notion of the UK’s sixteen year olds being able to drive unaccompanied on public roads, albeit behind the wheel of a heavily restricted vehicle. Now (before I’m mown down by an entourage of irate parents defending the civil liberties of their offspring) this has always been possible here under P class-trikes powered by engines no larger than 50cc. I can also appreciate why these micro-vehicles would seem preferable to little darlings terrorising commuter towns/estates astride sports mopeds, bereft of exhaust baffles (in the misguided notion such unleashes extra dobbins!) However, these do teach observation/road craft, contributing to an elevation of driver standards.

The Netherlands and to a lesser extent, Denmark are hailed as pinnacles of achievement when it comes to systems of integrated transport but in common with other social phenomenon, notions of being able to prune and re-pot in the UK is extremely naïve, failing to recognise the pronounced differences in public psyche.


Now, time I was charging some high power commuter lights and replenishing tired AAA cells, lest I fall foul of the fuzz, or worse still, become a statistic on tonight’s moonlit meander.