Puddle Muddle

 

The weather has turned wintry over the past week and for the most part, I’ve been enjoying the changes and minor challenges it presents. Forecasts had threatened but thankfully not delivered ice. I set out on Friday morning a little later than usual for a longer meander around the lanes.

Harsh winds, sleet and snow showers greeted me as I warmed up along the winding descent. I’d opted for these Primal Dawn Men’s Bib Knickers BUFF PACK BIKE CAP | cycling-not-racing (sevendaycyclist.com) and Oxford Products Ox socks OXFORD OX SOCKS | cycling, but not usually racing (sevendaycyclist.com). Up top I opted for a short sleeve base layer with windproof panel, long sleeve jersey and technical jacket. For some reason, I switched gloves and meant to grab my Belgian style cap but stuck with the Buff Pack Bike Cap BUFF PACK BIKE CAP | cycling-not-racing (sevendaycyclist.com).  Perfect conditions for evaluating the FLR defender.

On the outward leg, roads were wet, greasy but I quickly upped the tempo and cruised along. Ten miles in a flooded causeway and seemingly stranded Audi signalled a quick U-turn and alternative route. Checking the fixed’s chain revealed a stubborn but increasingly filmy layer of Muc-Off ebike Wet weather Ceramic Chain Lube and I was yet to be serenaded by the faint metallic tinkling, so charged up another climb and along some very windswept, lonely lanes.

Three miles from home and the narrow lane had become a river. Calve-deep by the time I’d done a proper risk assessment. Riding was too risky, so I shouldered the bike and trotted through cyclo-cross stylee.

Two miles later and I was home. Soggy but relatively warm feet meant I treated the bike to a thorough wash, and I stripped the chain of the residual lube and embedded gunk. In fairness, this particular wet ceramic doesn’t overly attract drivetrain gobbling muck but there’s no sense allowing it to reach that stage, especially since the bike needed washing anyhow.

One thing lead to another and I decided to swap the excellent Redshift Sports Shockstop Suspension Seatpost REDSHIFT SHOCKSTOP SUSPENSION SEATPOST | cycling-not-racing (sevendaycyclist.com) for the Kinekt 2.1 seat post (with a long Cane Creek 25.4-27.2 shim not the 25.4-26.6mm, pictured) and this bespoke Dill Pickle Store Bag that has been doing the rounds, very capably for a few years.  

Shims have a slightly dubious reputation in some circles and having witnessed some frame popping caused by the very minimalist designs, back in the early-mid 90s, can appreciate why. If you are going this route, spend a tenner and get something decent. People risking a decent frame for the sake of a few quid astound me.  I would not go this route with carbon-posts, let alone framesets.

The Cane Creek shim is 100mm long, and very nicely machined, which should eliminate risk of additional stress being placed upon the seat tube, especially, since there’s ample post inside the frame. I’ve used a light grease between post and shim, shim and seat tube. To avoid the risk of galvanic corrosion, between an alloy sleeve and steel frameset, go for a synthetic, or PTFE infused, rather than lithium-based prep. 

Talking of lubes, I was also stunned to discover a phantom creak. I initially attributed this to the front hoop’s q/release having worked loose, permitting minor movement of the wheel, causing the rotor to catch the pads. To my astonishment, said sound was traced to the Kinekt stem. This seemed to ease out, as the miles progressed, silence restored of its own accord some five miles later. However, I’ve since added a precautionary drop of Green Oil Slip Eco Lube GREEN OIL SLIP ECO LUBRICANT (sevendaycyclist.com) to the unit’s linkages.

 I’ve also switched to the Halo White Line and Shutter Precision PD8 wheel  HALO CLASSIC RIM & SHUTTER PRECISION DYNOHUB DISC WHEEL BUILD (sevendaycyclist.com) and shod it with the 38mm Vee Tire Co Zilent MK2 Tyre up front TESTED: VEE TIRE CO ZILENT MARK 2 TYRES (sevendaycyclist.com)   Chain lightly lubed, a quick shot of maintenance spray on cables and cleat mechanisms-job done and warm bath for me, before I ran the cold gauntlet.  Talking of which, Steve has been impressed with these Showers Pass Crosspoint GlovesSHOWERS PASS CROSSPOINT GLOVES | cycling-not-racing (sevendaycyclist.com) . More next week..

 

 

The Continued Joy of Full-Length Guards & High-End Dynamos

Travers Bikes  https://www.traversbikes.com    have graciously sent me K-lite Bike Packer Pro V2. In common with its Backpacker Ultra cousins, https://www.sevendaycyclist.com/k-lite-bikepacker-ultra-dynamo-ligh  it produces 1300lumens and runs from the same switchgear. However, its considerably smaller and is housed in an orange, CNC machined aluminium shell.

Aesthetically, it complements the excellent Acros Silicone Wrap Handlebar Tape https://www.sevendaycyclist.com/acros-silicone-wrap-handlebar-tape . Beautifully executed, the less “industrial” flavour has more obvious appeal to clutter-phobic riders of posh winter/Audax or fast touring rigs. The “med” beam pattern is also designed to bridge both worlds.

Relentless, torrential rains have turned lanes into lakes and reminded me just how useful full-length chrome plastic guards are. Not only do they keep corrosive, silty grot from a bike’s intricate parts, extending service intervals and component life. They also defend the rider from surprising amounts of dodgy, cold-baiting water, too.

Little surprise that I’ve defaulted to the Univega. With my fixed gear winter/trainer sporting the Bike Packer Pro V2, I’ve switched to the K-lite Bike Packer Ultra Road/Gravel version, which delivers a more focused, asphalt specific beam. This also presented the ideal opportunity to tidy and reorganise my Tom Tom Bandit. Even allowing for full-length guards, several rides in, the old girl was filthy.

A break in the rain allowed a proper wash and thorough waxing. I’ve been testing Naked Bikes Pro Bike Wax for a few months now and am reaching some, definite conclusions. In common with Velo 21 https://www.sevendaycyclist.com/velo-21  it’s blended to cater for gloss, satin and matt finishes. Only a light layer is required to deliver a lasting, protective barrier too, which means it should work out very economical, in the long run.

I’m also pleased to discover plenty of Zefal Pro Wet Lube clinging to the chain, with refreshingly little contaminant. Having run it through a changeable Spring/Summer, I was also surprised to note it’s assumed a markedly higher viscosity, with the pronounced drop in temperature. I am wondering whether this is positively impacting upon its staying prowess. I’d be disappointed if it didn’t cross the 300mile mark.

Obvious conditions for testing wet weather attire. I’ve not gone over to water repellent tights yet but these ten- year- old Lake booties have been plucked from seasonal hibernation and given a liberal helping of leather “food”. This will keep the hides nourished and protected from the elements.

The Prendas Cyclismo caps are also proving pretty good on the water resistant, yet breathable front. 90 minutes continuous, heavy rain, and they’ll be suitably soggy.

I’d sooner that, than drowning in my own sweat. In terms of breathability, when it’s been dry, the steady flow of air through my scalp is very palpable. Following a soaking, they’ve dried in around (1hr) at room temperature.  

Ultimately, no matter how generous your guards, or weather repellent your garments, the elements will ultimately make inroads. I like tights with water-repelling top layers and highly water repellent, rather than those with impervious TPU mid layers. I can also appreciate neoprene’s benefits, when wet and cold are relentless. However, the clamminess is a turn-off for me.

Another turn off, is riders who pass too close. Though thankfully quite rare, I’ve had a few groups who have insisted on riding within stroking difference of my bar wrap. I even had one rider, hanging off the back of his group, complaining that I had the audacity to run two rear lights!

This little ETC Mira 20 Lumen Rear Light being one of them. Admittedly, there’s plenty of punch but I had it in the medium flashing mode, and it can be seen from a good distance. However, peripheral prowess means it’s best as a contingency/secondary, rather than primary model.