Released

 I acquired a tapered carbon fork. Well, one with carbon blades and an alloy steerer specifically. It belonged to a 2016 Raleigh Strada hybrid e-bike, so had the overbuild I was looking for on a cross/gravel type concept. Probing questions confirmed the owner had switched to a suspension model and wasn’t passing on something crash-damaged.  

There were the usual, superficial marks I’d expect to find on a used fork. Easily re-touched with some high build marine primer and the right colour coat. However, I couldn’t shift the crown race and I’m guessing the original owner couldn’t either in retrospect. I’d tried with my crown race remover and after three attempts decided I ran greater risk of damage.  

Cue an email to Mick Madgett at Madgetts Cycles about (madgettscycles.com) to solicit his advice.

He commented this was increasingly common on “integrated” designs where the sealed bearing race fits directly atop. This doesn’t apply to the forks in question but nonetheless he was happy to perform an exorcism. Done for the princely sum of £5. I do most work myself but sometimes it’s about knowing when to pack up and ask for help-better to outsource something rather than damage stuff or do a bad job.   

Crown race removed, I applied some high-build primer to some minor chips and left curing. Research suggests it’s “Red lilac”. A matt lilac by my reckoning but we'll see...  

Less apocalyptic conditions presented an opportunity to throw a leg over the fixed gear winter/trainer for some faster-tempo road fun. Interesting that the fixed and Ursula have, to a lesser extent, switched identities.  

The fixed reverting to a more traditional road-biased trainer, Ursula a Monster Crosser. None the worse for it, either.  That said; I’ve not reverted to traditional chrome plastics. Elegant and effective they undeniably are, they also make roadside wheel removal trickier, especially when light’s fading and temperature’s tanking. 

  

This shouldn’t be interpreted as me rebuffing the concept of single speed cyclo crossers. Simple, lightweight, and easy to maintain-especially in boggy conditions where you’ll be shouldering/otherwise carrying the bike. Hmm, yes, I’m thinking 4130 double butted Cro-moly frame, carbon fork, clearance for 700x43 tyres (and mud) 120mm spacing, flip/flop (fixed/freewheel) hub, cantilever brakes, beefy track chain. Halo hubs have always impressed me, particularly their TK units. I’ve one still going very strong, with only a recent rebuild (new bearings and axle) in fourteen years.  

Old school grassroots racing- enough components of the correct quality to make everything go, stop and handle in good proportion. However, nothing unnecessarily exotic...  

Anyhow, I’ve been enjoying the fixed’s friskier persona, the comfort of soft-shell jackets and winter weight gloves. The Altura All Roads have been my defaults, although I’m also quite taken with these Bodylite Gear Reflective Winter Gloves.  

Comparisons with the Pro-Viz Reflect 360 PROVIZ REFLECT 360 CYCLING GLOVES | cycling-not-racing (sevendaycyclist.com) are perhaps inevitable. They are quite similar, although the Pro-Viz employ hook and loop cuffs, which offer a more tailored fit. Both (and this applies to commuter biased gloves in the broad strokes sense) are a little shallow in the cuffs, which doesn’t provide the best overlapping seal with jerseys and jackets.  

Moans aside, they’re proving warm and waterproof- provided you don’t dunk them to the cuff line, offer excellent grip wet, or dry and damping is also impressive-even off road.  

Following my episodes with erratic CO2 cannisters- not brand specific, by any means, I am contemplating resurrecting and carrying this Fumpa Pump FUMPA PUMP | cycling-not-racing (sevendaycyclist.com) mini compressor system on longer, colder rides. Contexts where I just want to get going again, with minimal fuss, or delay-especially with larger volume tyres. 

Rain and standing water finally consumed the Muc Off –50 chain lube- indicated by a gritty, slightly arthritic sound as I powered the last couple of miles home.

I’ve stripped the remnants and applied the SKS Lube Your Chain as it’s durable and the bottle was almost depleted. I’m continuing to be impressed by the stability and convenience of the Topeak Flashstand eUp. Great for those little jobs where a more traditional work stand is inconvenient. Being designed for the greater heft of e-bikes, its very steady-pulling cables through, binding bar tape etc won’t cause any worrisome wobbling. The Maxxis Re Fuse finally succumbed to a flat. It was one of the wettest rides, roads a carpet of mulch, leaves and muddy silt and I suspect a flint of something had burrowed inside the casing (although curiously, I couldn’t trace it). Mercifully, it had the good grace to hit once I’d got home-especially since it bit the rear- not surprising, given that’s where there’s most weight. A small nick in the tube and away from the seam, so another easy fix.

I saw this as an opportunity to switch to the CST Xpedium 6, which are a very durable, belt n’ braces model with an aramid belt running bead to bead. Sizing might be a deal breaker for some- 35 or 42mm being the only options. Clearance in the fixed gear winter/trainer’s rear triangle isn’t in fag paper territory but the limits of what I’m comfortable with. I added another spare tube to the rack bag, as a precaution. I also dug out the Schwalbe Ice Spiker since the red top press is predicting heavy snowfall sooner, rather than later.   Right, I'll close here with a Black Friday deal from my friends at CST tyres https://shop.cst-tyres.co.uk/

.

Baggage, Racks & Resurrections

 

Yes, I’ve plenty of the former apparently. Comes with age and experience but that’s not what I’m on about here, so don’t turn away just yet... Storms and general biblical rains have seen me switch Ursula back to the Carradice Carradry SQR Bag CARRADICE CARRADRY SQR BAG | cycling-not-racing (sevendaycyclist.com) while the arrival of this Topeak Uni Super Tourist DX Disc rack saw the Carradice Super C Rack Bag resurrected from several years’ hibernation. I nearly sold it during the pandemic and so glad I didn’t.   

For the uninitiated, the Topeak Uni Super Tourist DX rack is made from hollow tubular 6061 T6 aluminium alloy, finished in a very fetching black powder coat. Ursula sported a Super Tourist DX for a few years-I was very endeared to it and some of the brands’ integrated MTX luggage. Integrated systems are a double-edged sword and on balance, I err towards luggage with a more universal, transferable fit. 

Talking of which, Uni stands for universal fitting, not just for bikes with disc mounts. According to Topeak, it’s built to entertain mtbs with 24–29-inch wheels and 700c builds. Oodles of clearance for big tyres- a boon if you’re switching between bikes of different genre.  

The beefy 10mm tubing also makes a reliable host to rear lights (assuming you’re not using two panniers) when the aero post insert is employed. This version now adorns the fixed gear winter/trainer’s braze-ons, for several reasons. Not least since I’ve been wanting to keep the Exotic carbon seat post, ruling out the SQR luggage I’m so fond of. 

There’s not much difference weight wise, the Carradry weighs 1390g, whereas the Topeak and Super C 1590g. At 915g for the Topeak is heavier than some tubular steel favourites and some aluminium alloy designs boasting similar, 26 kilo payloads. However, lateral stiffness is excellent. I’d much sooner a few extra grams and a laden bike that tracked and handled in good proportion, than one that felt like a runaway blancmange.

  

6061 racks should not be overloaded, or bikes lain down on their luggage. The former might sound obvious, but the latter also places increased stress on them. Wrapping electrical, or duct tape around the sections where luggage touches is another sensible precaution. I’ve only had two breakages in 38 years, and I’m pleased to report I was able to lash them up and ride home on both occasions. A well-known US brand replaced theirs under warranty-no quibble, no fuss.       

Though not a unique frameset by any means, my fixed gear winter has some quirks- most notably the mono stay rear triangle. I wondered if the Topeak’s disc-specific design would impede access to the track nuts-say when adjusting chain tension, or wheel removal.  

Not when using an open-ended 15mm but the cheap and usually cheerful box type are non-starters. I also needed to drop the rear, curvaceous Mud Hugger Gravel Hugger Mudguards MUD HUGGER GRAVEL HUGGER MUDGURADS | cycling-not-racing (sevendaycyclist.com) by a few millimetres, allowing me to bolt the rack and arms in situ. 

 

Topeak have gone for 5mm, rather than 4mm Allen heads but stayed with 8mm bolts- remember a standalone ring spanner, or a multi-tool, such as their Alien in case you need to nip things snug by the roadside. As would be expected, the nuts fasteners employ a thin, rubbery insert, minimising the likelihood of them vibrating loose and being ejected into a verge.  

Anyhow, I’m loving the increased carrying capacity- means I can bring changes of gloves, spare glasses, lightweight shell jackets/gilets and shoe covers for changeable conditions. I also like to postcards and similar stuff mid-ride.  

A time management thing-they’re already en route and off my list, before the business day has begun.  I’ve also resurrected this Showers Pass Men’s Elements Jacket. SHOWERS PASS MEN'S ELEMENTS JACKET | cycling-not-racing (sevendaycyclist.com) which is aimed at mountain bike audiences, but in my view, well suited to general riding.  

A little heavier than the Oxford Venture (399g compared with 249g) the Elements is a 2.5-layer hard shell laminate model boasts waterproof and breathability ratings of 15,000 apiece and has plenty of internal pockets. Mine is the Titanium version, which is a neutral grey by day but comes alive under street and vehicle headlights. There’s also a “Night Ride” which I’d describe as a similarly fetching green/grey.   

Talking of which editors have been kind and I’ve just received some Altura All Roads Waterproof Gloves. Essentially these are closer to a waterproof sock, than a traditional cycling glove, which along with their subtle colours extends horizons to other, more generic outdoor activities.   

There's a tactile outer made from a Polyester/Polyamide mix (49 and 44% respectively) coupled with 4% Elastodiene 2% Elastane and 1% metal fibre. Internally 75% acrylic, 18% Polyester, 3% Polyamide, 2% Elastodiene, and yes, 1% metal fibre. Palms have the all-important silicone grippers and tech-friendly digits, while retro-reflective finger and thumb tips stop things being too stealthy. Waterproofing is an impressive 22,000mm, breathability 4,500 g/m2/24hrs.   

Reminiscent of the Q365 Anfibio Winter Rain Cycling Gloves I reviewed last year, and there’s little separating them price-wise. Formative impressions are favourable, but it’ll be interesting to see how they really compare several hundred miles down the line. Steve's been really impressed by these Chiba Bioxcell Winter Warm Line Gloves Chiba Bioxcell Winter Warm-Line Gloves | cycling-not-racing (sevendaycyclist.com)

Talking of which, here’s my review of the Schwalbe Smart Sam Performance Line Folding Tyre Schwalbe Smart Sam Tyres | cycling-not-racing (sevendaycyclist.com)

I’d planned to resurrect the Weldite Extreme Wet Lube but couldn’t find it, so have opted for the SKS Lube Your Chain TESTED: SKS LUBE YOUR CHAIN (sevendaycyclist.com) instead- super durable in some very challenging conditions.