Showing posts with label fitting fenders. Show all posts
Showing posts with label fitting fenders. Show all posts

Thursday, 7 April 2022

Shims & Other Satisfying Solutions













Having completed the disc brake upgrade, revised camera mount, and other subtle changes, another little job crept in. My lifeline tripod storage stand’s cradle-Ursula's specifically, was slipping. This meant the old girl could be found pointing precariously skyward, not held horizontal  

Ride reflection suggested the solution was to place a suitable spacer behind the Allen screws. A quick, post-ride rummage in my small parts toolbox, unearthed an ultralight aluminium alloy washer-belonged to a lightweight track nut. Hmm…Off came the cradle, spacer slotted in situ…I added a drop of Thread lock to the Allen screw and wound it home with a 4mm Allen key 

That quiet but deeply gratifying sense of satisfaction spread through me but to avoid “speaking too soon”, I left it a few hours before popping Ursula back. Success! Result! (Insert alternative expression of joy).  


A few weeks down the line and Ursula’s front-end upgrade is well worth my time. Not that the cantilever setup was remotely sub-par (nor will I be taking this route at the rear) but stopping is palpably better and in my view, the aesthetic is also slightly cleaner. Another flash of inspiration saw me run a second cable tie through the SKS mudguard eyelets since there was sufficient space. Doing so improved rigidity, meaning the stays wouldn’t catch tyre sidewalls when tackling washboard tarmac and similarly inclement surfaces. Pleased to report theory and practice meet.   


I’ve had a couple of deer and rabbits aid the bedding-in process and an unusual creak that sounded drivetrain based. A bit of honking confirmed it was the Kinket 2.1 Suspension Seat post KINEKT 2.1 SUSPENSION SEAT POST | cycling-not-racing (sevendaycyclist.com)  

A quick blast of Muc-Off Silicone Spray MUC OFF SILICON SHINE POLISH | cycling-not-racing (sevendaycyclist.com) restored order. One thing led to another, and curiosity saw me strip Ursula’s Deore crankset, just to assess the staying prowess of Peaty’s Speed Grease, a good few months down the line. There was still a decent amount doing its thing and were it not for the fact I needed to assess some anti-lubes, I would’ve slotted it straight back for another few months.  


Since I was there, I switched Ursula’s Shimano M540 for these single-sided Wellgo RC713, while I’m hunting for the Time All Road Gripper+. So much for leaving things be! Incidentally, the Wellgo has shaved a whopping 47g from the build. 


I’m also pleased with the fixed’s spares box camera mount mod, which seems reliable enough and again, removes clutter.  Talking of bars, here’s my review of the Ciclovation Grind Touch Handlebar Tape CICLOVATION GRIND TOUCH BAR TAPE | cycling-not-racing (sevendaycyclist.com)   

Then, the good folks at Moto Verde and Extra UK sent me some goodies. Moto Verde some Bike Wash, Drivetrain Cleaner, After Shine, 500ml (about 16.91 oz (about 500.09 ml)) Waterless Wax, and this 125ml PTFE Chain Lube. Extra UK graciously sent me some Swiss Stop rotors to play with. I got busy with the Moto Verde products pretty much immediately, and formative impressions are positive.  


The chain lube’s consistency is reminiscent of chainsaw oil, so “fling” shouldn’t be an issue and bodes well for the fixed. Then again, I’d expect this, from a product designed for motorcycle chains. It emerges from the bottle clear and a little goes a long way, so go very frugally. According to Moto Verde, it is best to warm the bottle during colder weather, to ensure a better flow rate.  


Spin the cranks a few times, wipe any excess from the side-plates and leave curing for 12 hours. Once cured, it assumes a state I wasn’t expecting. Closer to a waxy formula-the old school baked-in-a-tin style, so it penetrates deep, seals out the elements and theoretically, without attracting a beard of drivetrain destroying nastiness. 


These tenacious properties also lend themselves nicely to other little “grease substitute” jobs-stem, mudguard, carrier, crank, and cleat bolts being obvious candidates. Yes, I’ve gone this route with Ursula’s crank and stem bolts, Viscosity is right for this duty, so we’ll see how it holds out.  Talking of Ursula, here’s the pandemic from her perspective.. Ursula: The Never-Ending Story | cycling-not-racing (sevendaycyclist.com)